Red RC

May 17, 2023

Exotek Tenacity/Lasernut machined alloy gearboxes

Exotek Racing has released all machined alloy front and rear gearboxes for the Losi Tenacity and Lasernut series of 1:10 Crawlers. The bolt on replacement heavy duty gearbox delivers extra durability and precision gear mesh and alignment- the alloy construction insures the drive shaft gear maintains 100% teeth engagement against the diff gear to eliminate the problem of worn gear teeth and poor gear mesh. Additionally, larger 13mm input bearings are included to better withstand the forces of high powered motors on the input shaft to reduce bearing failures there. Beautifully polished, anodised and laser etched for a showroom look.

View more images here

May 17, 2023

Serpent Viper 990e 1:8 Electric Onroad

Serpent has announced the release of the Viper 990E, the successor to their successful 988E/989E 1:8 Electric Onroad chassis. Following extensive testing and research to improve the former electric powered 1:8 platforms, designer Michael Salven has put a lot of emphasis on the flex characteristic since that showed very promising results. On top of that Serpent have improved weight, weight distribution and ease of maintenance with a a lot of the development also going into the transmission. The goal was to have a bullet-proved, yet very free transmission. Some key features of the 990E are an ultra-narrow chassis that is milled down to allow the lowest possible mounting of the batteries plate as well as improving the overall flex characteristics. The central part of the chassis features 3 NACA ducts for the cooling of the speedo as well as the motor. The motor has been put as low as possible by machining the chassis underneath it. This improves the centre of gravity as well as the cooling from the bottom.

View more images here

May 16, 2023

MIBO Racing Tire Sander

MIBO has added this Racing Tire Sander to its range of racing accessories. A must-have tool for every onroad racing driver to prepare their tyres for optimal performance on the track, it makes removing mold lines from new tires quick and easy, allowing you to skip several laps of wear-in time. It is designed for use with files or sanding papers, available in various grit options. The rotation speed helps to effectively and evenly remove the mold lines, ensuring a smooth tyre surface. This way your tyres can provide better traction and consistent handling right from the start, allowing you to focus on achieving faster lap times.

Continue reading & view more images here

May 16, 2023

RDRP B74.2 2.5mm 7075 Aluminium Chassis Set

Revolution Design Racing Products has released this 2.5mm 7075 Aluminium Chassis Set for Team Associated’s B74.2 1:10 4WD Buggy. In today’s 4WD electric offroad class, the competition level is higher than ever. To succeed in the race, every RC car needs precise steering and optimal chassis flexibility. The Revolution Design B74.2 2.5mm Aluminium Chassis delivers just that. Based on the proven design for the B74.1, the chassis has been further developed for the B74.2. Thanks to directional milling, the Revolution Design B74.2 2.5mm aluminium chassis retains the original item’s torsional flex, and increases longitudinal stiffness. Weighing 113g, it is only 2g heavier than the original. For even more specific flex settings, a 2mm thick carbon brace is included in the package.

content

May 16, 2023

T-Works Ni-Cd Glow Plug Igniter

T-Works has a new Ni-Cd Glow Plug Igniter that use a SC2000mAh 1.2V Nickel-Cadmium battery. The advantage of nickel-cadmium battery is that the power will not be lost when not in use. The front end is made of steel and high quality copper parts and it is equipped with plastic cover to prevent short circuit when not in use/or storage.

Source: T-Works [rc-tworks.com]

May 16, 2023

PowerHD S15-Y Servo for Yokomo BD12

Power HD have announced the release of their Yokomo BD12 electric touring car specific servo S15-Y. With the integrated CNC mount, this S15-Y can be directly mounted to the Yokomo BD12, perfectly matching the original servo mount screw hole. The reverse receiver wire output offer neater wiring for the BD12 and contribute to lower centre of gravity. Having the same superior performance just like S15, the S15-Y can be programmed with Power HD program box, to set your favourite parameter according to the different tracks. The S15-Y is compatible with the Yokomo BD12 and BD11.

View features & specs here

May 16, 2023

Mugen MRX6X Optional Rear Shock Tower

Reigning 1:8 Onroad World Champion manufacturer Mugen Seiki has released a new optional rear shock tower for their MRX6X chassis. The new carbon fibre rear tower gets an added the hole in the middle and further two top holes from the standard shock mounting holes. This will create more fine tuning for rear shock angle with the added top two holes creating more rear traction on tracks with low grip condition.

View tower unmounted here

May 16, 2023

VP-Pro Atsushi Hara ‘Hot Pink’ product range

VP-Pro has released a range of ‘Hot Pink’ products as part of a collaboration with multiple RC World Champion Atsushi Hara. Based on the pink colouring that formed part of the Japanese legend’s signature body paint scheme, the range includes 1:8 offroad wings, a 1:10 buggy wing as well as 1:8 buggy rims. The colour is certain to make your buggy stand out!

Source: VP Pro [vp-racing.com]