July 21, 2020

Shepherd V8 & V10 AWS extra heavy brass weight

Shepherd have announced the released of their latest optional item for the Velox V8 and V10 platforms. The extra heavy brass weight can be used in combination with the Advance Weight System for the V8 as well as the V10. With 39g the weight lowers the centre of gravity significantly and quick fine tuning of the car’s weight balance is even easier. The item is milled from high quality brass material and available from now on.

Source: Shepherd [team-shepherd.com]

July 21, 2020

Arena RC Racing IF14-2 CF chassis & electronics plate

Coming from Arena RC Racing is a new carbon fibre chassis and floating electronics plate set for the Infinity IF14-2 touring car. The chassis is machined from harder high-quality carbon fibre for optimised flex which results in improved overall flex characteristics to which adds the add-on electronics plate that hovers above the chassis, ensuring more natural overall chassis flex and better left-to-right balance. The chassis features new machined chamfered edges for a professional finish and greater durability and included with the chassis and electronics plate comes suitable mounting hardware.

View more images here

July 21, 2020

Schumacher Mi7 aluminium spool/diff eccentric

Schumacher have introduced a new aluminium spool and differential eccentric for the Mi7 touring car that allows to adjust the height of the diff/spool to a new “high” position compared to the standard kit “low” position. The smart looking piece as normal is used to adjust the belt tension, as well as being able to fine tune the feeling of the car. Normally a higher front spool smooths the steering response compared to the standard low kit setting. A higher rear diff can give the car more drive out of the turns keeping it flatter whereas a low standard position normally gives a little more side bite. The eccentric features a black surface coating for wear and looks and it comes as pair.

Source: Schumacher [racing-cars.com]

July 21, 2020

Manuel Ortiz wins at 2020 Copa Kyosho

The 2020 Copa Kyosho was held at the Circuito Kyosho Ajusco in Mexico City, Mexico this past weekend. In the 1/10th Nitro Touring Pro class it was Juan Carlos Herrero with the overall TQ, some 0.7 seconds in front of Manual Ortiz and David Ortiz. The 40-minute main final then saw lots of position changes up front with Manuel Ortiz (Capricorn) eventually establishing himself in the lead in the closing stages after he had dropped down to being dead last in the early stages of the main. In the end Manual took the win a lap in front of Emiliano Robles (Infinity) in 2nd and Juan Carlos Gonzalez (Capricorn) in 3rd.

Source: RCTarget [rctarget.com]

July 21, 2020

2020 Greek 1/8th Off-Road Championship – Report

The 2020 Greek 1/8th Off-Road Championship was held at the Speed Track Renti in Renti, Athens this past weekend in Nitro Buggy and Electric Buggy classes. The one-off event saw a total of 31 participants for the nitro category, more than any other class so far for the 2020 Greek Nationals. In qualifying Tasos Paparegas (Xray) was able to take the pole position just five tenths in front of very fast and experienced Giannis Papanikolaou (Kyosho) with Panagiotis Terzis (Mugen) only another three seconds behind. In the main final it was Tasos Paparegas who would hold the upper hand, adding another championship to his belt with Giannis Papanikolaou finishing in a strong 2nd place and Alexandros Anapoliotakis (Tekno) finishing 3rd after making up a lot of ground in the final.

Continue reading the report here

July 21, 2020

T-Works X3 GTS & SRX8GT precision ball bearing sets

T-Works have introduced two new precision ball bearing sets for the Hong Nor X3 GTS 30th anniversary edition and the Serpent SRX8GT. Both sets include high-quality rubber covered and dirt-shielded ball races for optimised protection against dust, dirt and moisture while the inner metal shields reduce natural drivetrain drag. Both sets are available from now on.

View the SRX8GT ball race kit here

July 21, 2020

Element RC Enduro24 Sendero RTR trail truck

Element RC have introduced their new Enduro24 Sendero ready-to-run trail truck. Whether it’s outside on the trail or in the comfort of the own living room, there’s no doubt this little rig will overcome the challenge. This small-scale, 4-wheel-drive crawler comes equipped with many features found on larger size rigs. Full-time 4-wheel-drive transmission with divorced transfer case, metal vertical chassis rails, and 4-link suspension ensure climbing over obstacles will be a breeze. Providing power and control is a 2-in-1 receiver/ESC, 2-channel radio, powerful servo, and single-cell LiPo. Just install the batteries, charge, and go. Right out of the box, the Enduro24 RTR is ready for adventure where front and rear injection-moulded 4-link suspension allows for smooth articulation to crawl over rough terrain. The chassis-mounted servo provides maximum steering while maintaining scale looks. Crawl, grip and climb over obstacles with black, injection-moulded single-piece rims wrapped in soft compound rubber tyres. The forward-mounted motor puts the heaviest part of the rig over the front tires. This forward-bias weight keeps the front tires on the ground and provides better front grip during ascents. The divorced transfer case provides a lower centre of gravity in a compact space. Not only does this combination perform well, it also adds scale realism, allowing for plenty of room should you want to add a custom body or interior.

View a list of the key features and more images here

Tonisport
Mibosport
LC Racing
VP Racing
SRT
RCXX
Monaco RC
T-Works
RC Mart