RDRP setup tools and DEX210 options
Revolution Design Racing products have released a whole bunch of new products, including setup tools and option parts for the Durango DEX210. The ultra set-up stand is designed to deliver an even platform to measure the droop setting of 1/10 scale on-road chassis. It incorporates two 7075-T6 aluminium blocks that are connected via an aluminium rod. The chassis will be positioned on the top and you can exactly adjust the droop setting using the RDRP Ultra Ride Height Gauge Road.
The RDRP DEX210 Carbon Fibre Battery Plate is designed to replace the stock plastic battery hold down with a cooler looking and more functional solution. CNC-machined from high-quality carbon fibre the RDRP Aluminium Battery Plate holds the buggy’s battery more securely and also adds that factory touch to your ride. The plate is usable with both the mid and rear motor configuration of the DEX210 and also saves a bit of weight.
The RDRP DEX210 Brass Front Suspension Block replaces the kit’s plastic part with a more rigid solution for added strength, added weight and better looks. The CNC-machined brass part considerably strengthens the front end assembly and also adds a large amount of weight which ideal when you are running the car in either motor configuration. You can prevent the front end from lifting in high grip conditions and also let the front feel more planted over rough parts of the track. The RDRP DEX210 Brass Front suspension block comes with a shiny finish.
The RDRP DEX210 Brass Battery Stopper Block is designed to replace the kit’s plastic block with a more heavy solution to help add weight where it is needed. Depending on the motor configuration, battery pack used and also track conditions it can be necessary to add further weight near the centre of the buggy to achieve that perfect weight distribution or overall weight. The RDRP Brass Battery Stopper Block adds 24g of weight in front of the battery pack, for example when you are running the somewhat lighter “shorty” or light “low mAh” LiPo battery packs and it also securely hold the battery pack in place to avoid axial movement. The block is a drop-fit solution, is easily mounted using the original chassis location holes, is CNC-machined from brass and comes laser-etched for easy identification.
The RDRP DEX210 Brass RR Suspension Mount is designed to replace the stock RR plastic suspension mount with a more rigid and heavier solution. Depending on the motor configuration, battery pack used and also track conditions it can be necessary to add further weight to the rear of the buggy to achieve that perfect weight distribution. The RDRP Brass RR Suspension Mount adds 18g of weight to the very end of the buggy which can be an advantage when running the vehicle in mid motor configuration on lower traction surfaces or very bumpy tracks. The block is a drop-fit solution, is easily mounted using the original chassis location holes, is CNC-machined from brass and comes laser-etched for easy identification.
The RDRP DEX210 Brass Rear Weight Set is designed to add 50g of weight to the very end of the DEX210 buggy. Depending on the motor configuration, battery pack used and also track conditions it can be necessary to add further weight to the rear of the buggy to achieve that perfect weight distribution. Using the RDRP Brass Rear Weight Set can be an advantage when running the vehicle in mid motor configuration on lower traction surfaces or very bumpy tracks. The block is a drop-fit solution, is easily mounted using the original gear box mounting holes, is CNC-machined from brass and comes laser-etched for easy identification.
The RDRP DEX210 Shorty Foam Battery Block Set helps to achieve the perfect weight distribution when using the new line of 96mm “short” 2S LiPo battery packs. These are significantly shorter than standard 2S packs and need foam spacers to ensure a tight and secure fit in the battery compartments of most 2WD buggies and trucks. The RDRP DEX210 Shorty Foam Battery Block Set includes two short and one long foam block to help place the shorty pack in various locations within the battery compartment in order to find the perfect weight distribution. You can use the large block to achieve a straight front or rear placement or the two short blocks for a centred pack. The foam blocks of course fit many other vehicles as well.
Source: RDRP [revolution-rc.com]
