Schumacher Mi5evo double joint driveshafts

Schumacher have new double joint driveshafts for the Mi5evo and super high quality Pro ball bearings available. The driveshafts are made from super tough spring steel and are a replacement for the old G884 driveshafts. The new design is much stronger, less likely to bend or break in a hefty impact and is of a higher quality. The shafts also come with new high quality inner Pro ball bearings which are 3mm in width rather than the standard 4mm to allow the centre of the drive shaft to sit further into the hub carrier and as close as possible to the steering pivot, for maximum efficiency. The bearings have a larger diameter for more strength which means they need to be used with the new modified hub carriers which are supplied.

For the super serious racer always striving for the last 1/10th of a second Schumacher have also introduced a range of Pro ball bearings. Firstly to fit in the micro caster block for the Mi5 and Mi5evo, these bearings significantly reduce the amount of play in this area. Also new are 5x10x4mm axle/hub carrier and replacement 5x10x3mm inner double joint driveshaft bearings.

Source: Schumacher [racing-cars.com]