SWorkz Apollo 1/8th Pro RTR electric buggy

Following a couple of teasers SWorkz have finally unveiled the Apollo 1/8th Pro ready-to-run electric buggy. The vehicle is based off of the S35-2E Pro kit with whom it shares most of its race-inspired features such as the 7075 aluminium chassis. The front and rear shock towers are made of 7075 aluminium and the buggy utilises the S350 BK1 Pro Kit big bore version 2.0 shocks with 4mm shafts. The drivetrain is equipped with high performance crown and pinion gears and oil-filled differentials provide traction and balance on multiple off-road surfaces while the pivot ball steering system gives the driver sharp and accurate feedback. The buggy also comes pre-adjusted with a race-inspired base setting for an easy driving feeling. The kit is rounded out by high-quality Hobbywing electronics such as the SWorkz SE-100 100A 1/8 BL speed controller and the buggy is powered by the S-ePower SP2150 BL 3670 motor. The set is rounded out by the SES-2S 12kg-cm Savöx-made steering servo with metal gears, a 2.4Ghz radio system, and a clear, pre-cut body shell.

Features:
– Quality T7075 aluminium main chassis
– Quality T7075 front and rear shock towers
– SWORKz Pro 2.0 shock system with 4mm shock shafts
– High performance CNC-machined crown gears and pinion gears
– F/R full CVD drive shafts
– Aluminium adjustable front and rear lower plastic insert toe-in system
– Double protection bumper design
– Sealed front and rear arms design
– Adjustable front upper and lower suspension arm system
– Pre-cut Falcon II body shell included
– 2.4Ghz radio system (SW-T1 radio with USB charge system)
– SWorkz SE-100 100A 1/8 BL ESC (Made by Hobbywing)
– SWorkz SP-2150 3670 BL motor for 1/8 RTR motor system
– SWorkz SES-2S steering servo (with 12kg metal gear) made by Savox

Source: MW RC Cars [mwrccars.at]