New from double Onroad World Champions Infinity comes this new Clutch Nut Adjustment Tool for both 1:10 and 1:8 Onroad use. The adjustment tool fits directly onto clutch nuts such as that on the IF18-3 and IF15-2 with the flat top surface making it easy to apply force when tightening the nut and enables easy installation even with hard clutch springs.
Source: Creation Model [creationmodel.net]
Japanese radio and servo manufacturer KO Propo has announced the upcoming release of its latest electronically controlled power switch the Electrical Switch 4. With a new case size that is about half that of the Electrical Switch 3 the switch is intended for use on GP powered cars. A CPU memorises the power status (ON/OFF), so it can prevent power-off caused by connector connection failures due to vibrations specific to gasoline engine cars or momentary disconnections during overload. It features a full-colour LED to display the battery mode (cut-off voltage) and remaining battery power. This allows you to check the switch status at a glance and with high-intensity LED used it is easy to check even outdoors. The switch comes with two types of bottom cases included, one with fixing holes and one without, so you can switch between them depending on how you install it.
Awesomatix has released a number of new parts for its A800 touring car platform including their new PSSX Progressive Spring System. This is designed to add 30% progressivity into the originally linear action of SPR01S and SPR01 springs in all A700/A800 cars. An updated version of the previously known “PSS set”, the PSSX set comes with the new ST69X-30 Screw with wider cap that provides 30% progressivity across an increased range of suspension travel and suspension setups. All previous ST69 screw versions fit as well but are not included. With the PSSX set the initial action of spring is softer at the beginning of the compression and becomes progressively harder when the suspension get compressed during downtravel of the car. Our tests showed that the car with PSSX set at proper settings becomes more easy to drive and more consistent at low-med traction conditions and especially on outdoor asphalt tracks. In addition to the PSSX, Awesomatix has also released a new Rear Beam for its 1:12 car. For the A12X, this updated beam features an additional notch for easy track width measurement.
Source: Awesomatix [awesomatix.net]
With the countdown to the 2025 IFMAR 1:10 EP Offroad World Championships underway, host club Hills Off Road RC has published information regarding the Pre-World race which takes place at the Sydney track on April 3-6th with further testing opportunities either side of the race weekend. With the main event, the 20th running of 1:10 Offroad racing’s biggest prize, schedule for September 30th to October 6th, the Pre-Worlds event will give racers the opportunity to get familiar with the dirt and track surroundings at what is regarded as one of the premier offroad tracks in Australia. US tyre brand Raw Speed are the official controlled tyre for the event with their Super Mini Soft Compound with Grey Open Cell Insert tyre. Only the second time the country has hosted the World Championships for the category, Masami the double winner back in 1989, 2025 also marks the 40th anniversary of the Hills Offroad RC club which was founded the same year as IFMAR hosted the first ever 1:10 Offroad Worlds in 1985 in Del Mar, USA. The kangaroo in the official event logo looks like he is determined and focused on ensuring a home win for the Aussies!!
Source: Hills Off Road RC [Facebook]
JConcepts has released more aluminium option parts for the RC10B7 from Team Associated, this for the 2WD buggy’s steering. With each part offered in a blue or black anodised finish, the servo saver-less aluminium steering bellcrank item is CNC-machined and and sports machined chamfered silver edges and engraved JC logos. Its light-weight assembly provides a more rigid steering system with increased steering feel and response. To compliment the bellcranks they are also offering an aluminium steering race with the same finish. Completing the latest release are the all caster hat bushings that are CNC machined and have trick indentations providing styling cues and identifiers to quickly recognise thickness. They arrived packaged including the 0mm and 3mm thickness, most used in carpet racing applications.
T-Works has added three new options of DLC-coated shock shaft sets to cover Yokomo’s offroad range of buggies. Intended for the Japanese manufacturer’s MS, SO and YZ shocks, the shafts are available in 41mm, 47mm and 48.6mm lengths. Made of high-quality steel and they sport a DLC surface treatment, the same as the crankshaft coating of many competition engines. The slick yet very durable surface protects the shock shaft from becoming excessively scratched or damaged while ensuring super-smooth shock action.
Source: T-Works [rc-tworks.com]
New from radio manufacturer FlySky comes their new micro size GMR-C3 receiver intended for use in Mini Z, 1:28 Pan car, Micro and Mini RC cars. Offer the previous GMR receiver the C3 is 25% smaller in size and 23% lighter coming in at just 1.3 grams. Compliant with AFHDS 3 (third generation automatic frequency hopping digital system), the 3-channel micro receiver features a a single antenna and bi-directional. It supports external gyroscope connection and parameters adjustment on transmitter. The receiver is compatible with FkySky’s Noble range of transmitters.
Infinity has released a new optional Hybrid Steering Knuckle set for their IF11 1:10 Formula chassis. Featuring titanium axle shafts and duralumin steering knuckles the Hybrid has been designed to expand the adjustability options for the front end. Mild steering characteristics are achieved by setting the amount of trail at 3mm. The thickness of the steering knuckle is 6mm, which allows for a wider range of ride height adjustment.
Source: Creation Model [creationmodel.net]
