Team Powers Radon Pro V3 brushless speed controller

Team Powers have introduced the new Radon Pro V3 brushless speed controller. The all-new ESC is substantially smaller and about ten percent lighter than the Pro V2 controller, it features a 6V/7.4V BEC system and a 180A rating. Softer 12AWG wires, a new internal on/off switch, a black receiver lead and the ability to use 25mm or 30mm cooling fans round out the hardware package. On the software side of things the speedo features 1kHZ to 16kHz throttle and brake frequency selection, it sports an RPM lock function to vary the overall powerband of the motor and a more linear boost and turbo function makes for improved drivability.

Specifications:
– Control: Forward/Brake/Reverse
– Input voltage: 2S-3S LiPo
– BEC: 6V/7.4V, max. 5A
– Motor Limit: >4.5T
– Max current: 180A per phase
– Size: 38x30x19mm
– Weight: 41.5g

Features:
– Ultra-smooth, precise throttle and braking control
– Compatible with sensored/sensorless brushless motors
– Data analysis capability (RPM, low voltage and ESC temperature)
– Radon-PC link connect with PC interface for advanced programming and updating
– Easy programming through program card (not included in the package)
– Built-in one touch on/off switch with LED
– Built-in low voltage cut-off, overheat protection and signal loss protection

Source: Team Powers [team-powers.com]