Fantom FR-10 Pro 2S & FR-1S Pro speed controllers

Fantom Racing have announced the release of their new FR-10 Pro 2S all-black and FR-1S Pro 1S brushless speed controllers. Both are rated at 160A with the 2S variant being 2019 ROAR 13.5T 4WD, 17.5T 2WD and 17.5T Short Course national champion in the hands of Dreighton Stoub. The 2S variant features a new all-black case for a stealthy look while 11 AWG ultra-low resistance wires ensure minimal power loss in modified class. A 32-bit high-performance CPU, adjustable 6V/7.4V BEC system and on-board power button round out the package.

FR-10 2S features:
– New all-black case
– All R&D done in the USA
– 1:10 Scale, 2-3 Cell, 160 Amp
– 2,303 Strand, 11AWG wire
– High-turbulence heat sink design
– Ultra-low resistance FET board
– Precision throttle & brake frequency adjustment
– 25mm fan w/ aluminium fan cover
– Blinky mode sSoftware
– On-board power button
– Off-By-Radio function
– Firmware updateable with Fantom LCD Program Card
– ROAR approved (Internals) / ROAR approval pending (Black Case)

Specifications:
– Continuous current: 160 Amps
– 32-bit high performance CPU
– Battery Input: 2-3 cell LiPo / 4-6 cell NiMH
– BEC output: Linear 6V or 7.4V adjustable, 5 Amps
– Dimensions without fan: (L) 38mm x (W) 30.6mm x (H) 19.3mm
– Weight without wiring and fan: 48 grams
– Programmable with LCD Program Card (sold separately)
– Sensored: Yes
– Sensorless: Compatible but not optimal
– Motor Limit: 4.5 Turn and over

As for the 1S variant, the controller builds on the FR-10 Pro, it shares the same all-aluminium case and it usable with down to 4.5T modified motors. The BEC system delivers 6V at 3A output and the controller is fully adjustable using Fantom’s optional LCD program card.

FR-1S Pro features:
– New all-black case
– All R&D done in the USA
– 1:10 Scale, 1 Cell, 160 Amp
– 2,303 Strand, 11AWG wire
– High-turbulence heat sink design
– Ultra-low resistance FET board
– Precision throttle & brake frequency adjustment
– 25mm fan w/ aluminium fan cover
– Blinky mode sSoftware
– On-board power button
– Off-By-Radio function
– Firmware updateable with Fantom LCD Program Card
– ROAR approval pending (Black Case)

Specifications:
– Continuous current: 160 Amps
– 32-bit high performance CPU
– Battery Input: 1 cell LiPo / 4 cell NiMH
– BEC output: Linear 6V 3 Amps
– Dimensions without fan: (L) 38mm x (W) 30.6mm x (H) 19.3mm
– Weight without wiring and fan: 48 grams
– Programmable with LCD Program Card (sold separately)
– Sensored: Yes
– Sensorless: Compatible but not optimal
– Motor Limit: 4.5 Turn and over

Source: Fantom [fantomracing.com]