Red RC » Sebastian

January 26, 2018

Rafael Panayi TQs & wins at ENEOS Cup

The TQ RC Raceway off-road track of Nicosia, Cyprus played host to the recent ENEOS Cup race. Good weather made for perfect racing conditions, however the bumpy, low to medium traction track conditions were a bit of a challenge for the drivers. Xray’s Rafael Panayi was in control of things all day, taking the hattrick of TQ, win and fastest lap to round out a perfect weekend. Savvas Savva (Xray) came in 2nd from HongNor driver Charis Kkolis in 3rd.

Source: Xray [teamxray.com]

January 26, 2018

Reds Racing VX2 540-size brushless motor

Reds Racing have introduced their new VX2 540-size brushless motor line. With a new low internal resistance design the motor offers improved performance and efficiency while the new high airflow can enhances cooling efficiency by 20 percent compared to the 1st generation motor. The new high power stator does away with a separate insulator which reduces weight and improves cooling while pure copper wires and low resistance collector rings guarantee a maximum in power and RPM. The motor complies with IFMAR, ROAR, BRCA and JMRCA rules and it is available in 5.5T to 8.5T modified as well as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T stock windings.

View the features and more images here

January 26, 2018

RC Cars Cavalieri D817 V2 carbon radio plate

RC Cars Cavalieri from Germany have introduced their updated carbon fibre radio plate for the HB Racing D817 V2 buggy. Originally designed for the D817 and D815, changes made to the design now allows to use the carbon reinforcement frames on the new D817 V2. The 2-piece set was designed to mount to the standard composite radio tray in order to add strength to the structure for an overall stiffer chassis assembly.

Source: RC Cars Cavalieri [rc-cars-cavalieri.com]

January 26, 2018

Muchmore Fleta ZX V2 Specter outlaw stock motor

Muchmore have introduced their new Fleta ZX V2 Specter brushless outlaw stock motor. It builds on the proven ZX V2 setup but features a special short stack stator for reduced internal resistance and a sintered rotor with the combination of both being good for up to 35 percent more power output compared to traditional stock motors while delivering a maximum in terms of RPM and torque. In addition the 12.3×5.0×24.2Z MR-FZR27TiZ rotor with titanium shaft makes for a lower rotation mass, resulting in razor-sharp throttle response. Other features include Grade 5 ball bearings, an aluminium endplate for improved heat dissipation as well as silver-plated solder tabs. The motor does not comply with ROAR and EFRA rules and is available in 13.5T, 17.5T and 21.5T windings.

View the Ti rotor here

January 26, 2018

Volante Mini pre-glued rubber slick tyres

Volante have introduced their new Mini series of pre-glued rubber slick tyres for Tamiya M-chassis and similar cars. The tyres come pre-glued on white zero offset multi-spoke rims and are available in soft 24R, medium 30R and hard 36R compound to cater for carpet and asphalt racing alike. The tyres come in sets of four and will hit stores soon.

Source: Volante [volantetire.com]

January 26, 2018

Lovan RC Challenge Rd2 – Report

The second round of the Lovan RC Challenge was held last weekend with the event again attracting a lot of drivers. French top Stock driver Steve Dellatre made his entry as did Dutch ace, John Ermen while Willy Voisangrain came to defend his win at the opening round of the series. Robin D’hondt also made his entry but was unable to make it to the race unfortunately. Overall 65 entries made for some good racing – not a bad number given the popular GP3F was held on the same weekend. During practice John Ermen set a blistering pace in both the Touring EFRA and Stock classes as did young Liam van de Wouwer who excelled in the EFRA and Formula classes.

Continue reading the report here

January 26, 2018

HB Racing 817 V3 caster blocks & new servo arms

Coming from HB Racing are the new V3 caster blocks for the 817 series of vehicles as well as new servo arms. Starting with the C-hubs, the parts are of an updated design for improved strength and they are available in 15 degree, 17.5 degree and 20 degree specification to fine-tune the steering characteristics of the car. The new design comes standard on the D817 V2 and E817 E2 buggies and also fits most of HB Racing’s other 8-series off-road vehicles. The machined aluminium blocks are black anodised for wear and looks and sport laser-etched markings for easy identification.

Continue reading here

January 26, 2018

Team Orion Ultimate Graphene LiPo & LiHV batteries

Coming from Team Orion are their new Ultimate Graphene LiPo and LiHV battery packs. Marking the pinnacle of development, the new packs offer an ultra low internal resistance, improved capacity, as well as reliable and stable power supply from start to finish. The Ultimate Graphene LiPo range includes two families of batteries, the standard voltage Ultimate Graphene LiPo and the high voltage Ultimate Graphene LiPo HV packs. The new batteries are available in all popular formats, shorty, LCG shorty, stick as well as 4S block for 1/8. All are built to meet ROAR, EFRA, BRCA, and IFMAR specifications, they utilise 120C cells and heavy duty gold-plated connectors.

Source: Team Orion [teamorion.com]