January 24, 2018

Riccardo Berton O.S. Speed powered for 2018

O.S. Engines have announced the addition of Italy’s Riccardo Berton to their factory team for the 2018 season. The former EFRA “B” European and National Champion will be using O.S. Speed engines in his Kyosho 1/8th nitro buggy rides while attending all major national and international races.

Source: O.S. Engines [os-engines.co.jp]


January 23, 2018

JConcepts EB410 F2 body & front scoop

JConcepts have introduced their new F2 body shell and front scoop for the Tekno EB410 1/10th 4WD buggy. Starting with the body, the lid’s design is based off of the original Finisher body but the F2 provides an even more aggressive look with an increased windshield angle that provides a steady force upfront during mid-flight wind gusts on large jumps and simplified side pods to remove unwanted changes in height. The narrow rear-end of the Tekno played a role in the look and feel, however, the JConcepts designers wanted more. The team incorporated a high-end floor feature which aggressively provides a look and feel not seen before on an RC car and reminiscent of an open wheel Formula car. The F2 is also dramatically lower in height and special consideration was made for the steering, servo horn and front geometry to allow the body to have that drop-on fit. The EB410 kit includes a side-mount fan option which has also been taken into consideration with the F2 body design. The body includes a louver design built into the right hand side pod which runs alongside the fan and scribe lines where the user can add holes for direct air circulation. In addition to the newly designed body, JConcepts has included two of the latest S-Type Aero rear wings used by Ryan Maifield to win the 2017 IFMAR World Championships. The rear wing is also available separately in a 2-piece set as is a front scoop/nose cone that also is a direct fit on the EB410.

View more images here


January 23, 2018

SWorkz SPower & O.S. LPF cooling head

Coming from SWorkz and made for the SPower S7 Evo II and O.S. Speed Spec II/III and B2102 engines is the new LPF cooling head. The heatsink is 24mm lower than the standard version while the weight is also reduced by 10g which results in a dramatically lowered centre of gravity. The outcome are improved cornering performance, increased stability and less chances of damaging the heatsink in the event of a crash. Thanks to the larger diameter of the heatsink the cooling performance is the same compared to a standard, tall cooling head.

Source: SWorkz [sworkz.com]


January 23, 2018

Hot Race Tyres introduce new closed cell inserts

Coming from Hot Race Tyres is a new blue colour closed cell inserts for all 1/8th buggy tyres. It was developed especially for racing in hot ambient temperatures and for medium to high-grip track conditions. The insert is meant to provide improved precision, more traction and better corner speed and it is available from now on.

Source: Hot Race Tyres [hotracetyres.com]


January 23, 2018

BRCA Formula Indoor Nationals Rd3 – Report

The third round of the BRCA Formula Indoor nationals took place at the Midlands Raceway permanent indoor venue near Birmingham. The snow during the early hours of the morning meant some drives could not get the venue with traffic disruption but 16 drivers made it to the great facility. Despite being a small track area the layout was fairly flowing and suited to Formula racing. The ETS spec carpet provided good grip for drivers once a few rounds of practice were done. During the two rounds of practice it was Luke Lee, Michael Lee and Ben Cosgrove who seemed to have dialled in to the track setting some quick lap times.

Continue reading the report here


January 23, 2018

T-Works XB4’17/18 front CVD sets

T-Works have introduced two sets of front CV-style driveshafts for the Xray XB4’18 and ’17 buggies. Available as standard or special “left thread” set, the driveshafts are made form high-quality steel for durability while the machined wheel axle shafts ensure a good bearing fit. The sets are direct replacements with the left thread set, utilising a single left thread wheel axle, being made to reduce the chance of loosing the wheel nut as it will self-lock during use.

View the left thread set here


January 23, 2018

Kyosho Europe welcome Carlos Fonseca

Kyosho Europe have announced the signing of Carlos Fonseca to their team. The Portuguese 1/8th off-road front-runner will campaign Kyosho’s 1/8th off-road platforms this coming season and this is what he has to say about the deal:

I’m very excited to announce that I officially joined Team Kyosho Europe for this coming season. I want to say thanks to Kyosho Europe for giving me this great opportunity to be part of the team that already knows the success worldwide.

Source: Kyosho [kyoshoeurope.com]


January 23, 2018

Picco R2-3518 Team DLC Ceramic on-road engine

In addition to their new .21 off-road and .12 nitro touring engines, Italian company Picco also have a new 3.5cc nitro on-road engine available. The R2-3518 Team DLC Ceramic is based off of the popular R1 platform and thanks to numerous improvements the power band and stability could be further improved. A new cylinder port shape and crankshaft design optimise the internal mixture flow and also the bore/stroke ratio has been updated slightly compared to the R1. The new engine still features the DLC coated crankshaft for great durability of all parts involved while the latest crankcase design provides improved overall stiffness and therefore a more stable performance at every temperature. The engine is rounded out by a rear Swiss-made ceramic bearing and a carburettor with double bottom-end adjustment.

View the specifications and another image here