Coming from WRC and made for the NTX 1/10th 200mm nitro touring car is a rear stiffener set. Made up using two ball cups and an adjustable turnbuckle, the stiffener connects the radio plate and 2-speed bulkhead for improved pitch stiffness without affecting torsional flex. The result is a more reinforced chassis which is beneficial especially on high-bite tracks.
Mugen Seiki Europe have announced the addition of 1/8th Nitro On-road World Champion, Simon Kurzbuch to their 1/10th electric on-road team. The Shepherd factory driver will campaign Mugen’s MTC1 1/10th electric touring car this coming indoor season at national and international events.
Source: Mugen [mugen.eu]
Coming from 7075.it is a brass chassis weight for 1/10th electric touring cars. Machined from 1.5mm material and weighing in at 29g the weight was designed to be placed in the electronics area in order to add weight, and maintain the proper left-to-right balance, when running the new generation of lighter speed controllers. The weight is attached to the chassis using thin double sided tape and it is compatible with cars such as the Xray T4’17/18, Mugen MTC1 and Infinity IF14.
Mugen Seiki Racing have announced the signing of 14-times Brazilian 1/8th on-road champion, Flavio Elias to their team. Flavio brings a tremendous amount of experience in racing which will be a huge asset to Mugen Seiki Racing’s on-road team. Flavio will be attending all Brazilian Nationals and major events in South America and he will also race at the 1/10th IFMAR Nitro Touring Car World Championship in 2018.
Source: Mugen [mugenracing.com]
The 2017 Fall Brawl was held at AMain’s Silver Dollar Raceway this past weekend. In the Pro Nitro Buggy A-main it was Cj Jelin (Xray) with the win. Starting from the 2 spot on the grid he followed pole position holder Mason Eppley for about eleven laps until he was able to pass him. After a couple of lead changes due to different pit strategies it was Cj with the win from Mason. Philip Atondo (TLR) rounded out the top 3 result.
Continue reading the report here
Coming from Tekno and specially made for the EB410 1/10th 4WD buggy is an aluminium servo horn. The arm is not only stronger and less flexible compared to the plastic counterpart, but it is also designed to fit both low profile and standard height servo configurations by simply flipping it by 180 degrees. Featuring the race-proven M3 clamp and intended for use on 25 tooth spline servos, the servo horn is the ideal fit for the EB410 buggy.
The final round of the Indonesian Electric On-road National Championship was held at East Speedway, Jakarta. The race attracted a total of 45 participants who battled for the national title. In the Touring Modified class it was Muhammad Izzah who secured the pole position after TQing Q2 and Q3 while Q1 belonged to Arya Seta. Bowie Ginting started from 2nd on the grid with Arya, Chandra Yosef and Christian Mamesah completed the top 5. The main final then was won by a calm Izzah who withstood high pressure to secure the overall win from Bowie and Christian.
Continue reading the report here
Xray have introduced the 2018 variant of their EFRA European Championship and ETS winning X1 formula car kit. The vehicle is based on the 2017 variant and features some subtle updates compared to the previous car. First up and most visible is an all-new chassis design with the ’18 main plate being 24mm narrower compared to the ’17 car in order to eliminate chassis scrub in high speed corners and when running on high-bite surfaces.
