Schumacher have introduced the Contact RC LMP12 control tyres. Available in the popular and hard wearing ‘A’ foam with 32 shore hardness for the front and 30 shore for the rear, the tyres sport an orange stripe for easy visual inspection, making it an ideal control wheel for clubs and racing series. The front tyre comes trued to 44mm while the rear tyre is cut to 46mm.
Coming from Imbue are the V4 baffled brass shock pistons for 1/8th off-road vehicles. The patent pending pistons offer an innovative design that allows to fine-tune the shock package using interchangeable shims. The 16mm diameter pistons are machined from high-quality brass material and include medium and high pack baffles with the overall design allowing for a very progressive shock action and a compression speed depending pack which will result in increased car control, saver landings and an overall easier-to-drive-hard-car especially in low traction and rough track conditions. The sets include four pistons, they come as 5-hole 1.45mm and 8-hole 1.15mm/1.35mm variants and are available for Xray, Kyosho, JQRacing, Team Associated, Tekno, Mugen MBX7 and HB Racing D8 series kits.
The famous Circuito L.Collari track in Cassino played host to the Trofeo Safetycarmodel recently. In the Open 1/8 Nitro category it was Antonio Calce who took home the win in a very close battle with Domenico Calce, both were separated by only half a second after 30 minutes of racing. Behind the two Nicola Marone completed the top 3 podium result another lap down.
Source: Shepherd [team-shepherd.com]
Round 1 of the Winter Series was held at UK’s Remote World Model Car Club this past weekend. Agama’s Darren Bloomfield was in control of things and in the 20-minute main final he took the win some twelve seconds in front of HB Racing’s Ollie Currie while SWorkz’s Jack Embling would round out the top 3 result one lap down. Darren Hayden-Ball (Team Associated) and Tommy Chung (TLR) completed the top 5 result.
Source: RWMCC [facebook.com]
The Elda track played host to this year’s Spanish 1/8th Nitro Buggy Championship finale this past weekend. The stage was set for a dramatic race as Mugen’s Robert Batlle and Juan Carlos Canas both had a shot at this year’s overall title and whoever would win would also take this year’s championship. Robert would soon cement his ambitions to snatch his 12th consecutive Nitro Buggy title while Juan Carlos had a bit of a standing start, only to fight back in the semis and to snatch the P2 spot on the main final grid. The 45-minute A-main then saw a tight battle between Battle and Canas until the very last lap when Juan Carlos tried to overtake Robert in an ambitious maneuver that send both on their roofs. A very wise marshal then but both back on the ground simultaneously to not interfere in the title fight and ultimately it was Robert who had the holeshot and took his 12th national Nitro Buggy title in a row by about a second in front of Juan Carlos.
Italian company BMT has introduced a hard suspension arm set for the 984 1/8th on-road car. Moulded from a harder compound the arms offer increased stiffness compared to the standard parts which results in improved handling and precision when running in high grip and/or high temperature conditions.
Source: BMT [bmt-team.com]
Mugen Seiki Europe have introduced their new MTC1 Multi Work Board. Based on 4TheTop’s GeometX board, the multi-functional board offers an embedded camber gauge and it is of a new honeycomb design for a low weight and high stability. It measures 430x290mm, it can be used as work and precision setup board and it comes with a MTC1 print, a rubber cover mat and a carrying bag. The bottom side, with machined pockets and measuring gauges, allows for a tidy workspace during building, setup and maintenance. The limited edition board is available now.
Coming from Motiv is their new Long Use 2400mAh transmitter or receiver LiPo battery pack. Of a straight-type design the battery measures 83x30x16.5mm and it weighs in at 80g. The high capacity cells used to built the pacl ensure runtimes of over an hour in nitro vehicles and multiple hours in transmitters. The 7.4V LiPo pack comes pre-soldered with an industry-standard balancer and universal power connector.
Source: Motiv [motivrc.com]
