Red RC » Sebastian

September 1, 2017

Wesley van Helmond takes Belgian 2WD title

Round 5 of the Belgium 1/10th electric off-road championship was held at the MAC Vlijmen track recently. Wesley van Helmond was on fire in the 2WD Buggy class, taking the overall TQ and also the day’s win from Brent Ausloos 2nd and Wouter Wynen 3rd. With the win Wesley wrapped up the 2WD title, something he will also try to accomplish in the 4WD class at the forthcoming final round of the championship in a few weeks time.

Source: Schumacher [racing-cars.com]

September 1, 2017

Morganti & Apolaro win at Great Lakes Challenge

The Great Lakes Challenge was held recently with this year was the most competition for a few years, providing very tight racing in all classes. In the 1/8th class the fight for the TQ was very close. DJ Apolaro TQ’d three of the five rounds beating out Joaquin Desoto Jr by only 4 tenths. He also set the new track record with 18 laps in 5:05.561 and the top 5 after qualifying would be DJ Apolaro, Joaquin Desoto Jr., Paolo Morganti, Paul Lemieux and Ralph Burch.

Continue reading the report here

September 1, 2017

Schumacher Mi6evo carbon fibre chassis & top deck

Coming from Schumacher are a new chassis and updated top decks for the Mi6 and Mi6evo touring cars. The new 2.25mm soft weave chassis will increase the flex of the Mi6-series cars compared to the kit 2.5mm chassis, improving performance especially in lower grip conditions. It will also lower the centre of gravity, improving corner speed.

Continue reading here

September 1, 2017

Tekno release more EB410 images

Following a first series of images and information about their forthcoming EB410 1/10th 4WD buggy, Tekno have now gone a bit more into deep with part two of their introduction series. The latest instalment mainly focusses on the shaft drivetrain that is made up using tapered aluminium centre dogbone-style driveshafts and high-capacity front, centre and rear differentials. Other driveline features include CVA-style front and rear driveshafts with 6mm hardened steel stub axles that run in large inner wheel bearings.

Continue reading here

September 1, 2017

Schumacher Cactus 1/10th buggy carpet tyres

Schumacher have introduced their all-new Cactus 1/10th buggy tyre. The tread has been specially developed for EOS style carpet and offers improved driving feel, faster lap times, and longer life. It has been extensively tested on both new and well worn carpets and the long life design with high density pin pattern and famous stagger edge design will greatly minimise grip roll. The tyre becomes available as 2.2″ rear and 2.2″ 4WD front variant in silver, yellow and blue compound and also as yellow compound pre-mounts. The Cactus was also chosen as the new control tyre for the 2017/18 EOS season and this winter’s Mibosport Cup. Part numbers will be U6839 for 4WD/2WD rear and U6841 for 4WD front while the 2WD class will rely on the proven U6801 (Cut Stagger Low Profile) as the front tyre.

View the rear tyre here

September 1, 2017

Hiro Seiko introduce new lightweight screw kits

Coming from Hiro Seiko are new lightweight screw kits for the Xray X10 and X12 series of pan cars as well as the new Xpress XQ1 and the Awesomatix A800X. The X10’18 related kits come as mixed aluminium and titanium or full titanium sets that save 15.5g or 12.6g of weight respectively. The X12’18 kits also come as mixed or full titanium sets, scrubbing 15.5g or 12.2g respectively with the mixed sets including orange anodised aluminium and natural finish titanium fasteners. Swinging over to the touring car sets, the fastener kit for the XQ1 saves about 29g for the mixed and 21g for the all-titanium set while the A800X assortments scrub 23g with the mixed and 18.5g with the all-titanium kit. The mixed sets use red alloy screws for the XQ1 and gold-anodised fasteners in the mixed Awesomatix set.

View the other screw sets here

September 1, 2017

Exotek TLR 22 4.0/3.0 alloy front camber block

Exotek have introduced a front camber block with integrated anti-roll bar mount for the TLR 22 4.0 and 3.0 series of buggies and trucks. The heavy duty alloy front camber block was designed for the use with TLR sway bars and it is machined down to seven grams to minimise weight but made with 7075 alloy to increase the strength over the stock piece. The part uses set screw holes to remove excess play from the sway bar and it comes polished, anodised black and laser-etched for wear and looks.

View more images here

September 1, 2017

3DRC Formula Aero Wings for 1/10th formula cars

3DRC have introduced their all-new Formula Aero Wings suitable for most 1/10th formula pan cars. They mimic the now wider and lower wings used in Formula 1 and they are available with the industry-standard Tamiya-style mounting pattern or as dedicated variant for the Team Associated F6 – the latter requiring the F6’s lower wing mount. Both come with DRS mock-ups for looks and the universal wing also sports a monkey seat for even greater scale appearance. The wings are tough and durable as all of 3DRC’s 3-D-printed parts, however they are not as sturdy as moulded plastic wings and may crack as the result of very hard impacts. As usual the parts are available through 3DRC’s Shapeways store or at select model shops.

View more images here