Red RC » Sebastian

October 22, 2016

MIP introduced updated Wraith CVD centre drive kits

MIP have introduced their updated CVD centre drive kits for the Axial Wraith off-roader. Running changes over at Axial made it necessary for MIP to update their design and thus MIP’s new Wraith axles will no longer feature a double set screw design to clamp onto the through hole but now incorporate a pin set screw for attachment. Along with that improvement MIP have also changed the drive hubs so that there is no longer any interference when it comes to making contact with the stock spur gear cover. Last but not least this kit covers all Wraith models.

Source: MIP [miponline.com]

October 21, 2016

BRCA 1/10th IC Nationals Rd8 – Report

The final round of the BRCA 1/10th IC National Series took place at Mendip. The Saturday practice day proved to be wet meaning that the majority of drivers would go into the race day with minimal practice time. In the 1/10th 200mm class, the championship was still up for grabs between Mark Green (Serpent/XRD F.T. Line) and Joe Kerry (Capricorn/O.S. Speed). Both drivers along with Alex Thurston (Serpent/XRD F.T. Line) set the pace in a very tight qualifying with Joe taking the TQ just 0.2 seconds ahead of Alex with Mark in 3rd a further 0.4 seconds back. In the final, both Joe and Alex hit troubles at the start allowing Mark Green to take the win and with it the 1/10th 200mm national title. James Conolly (Mugen Seiki/Picco MAG Tuned) would finish in 2nd with Joe eventually recovering to finish 3rd. In the championship, Mark would finish on 603 points with Joe in 2nd on 598 points and Alex in 3rd on 587 points.

Continue reading here

October 21, 2016

Tekno SCT.3 & SL high roll centre rear hubs

Tekno SCT-3 & SL high roll centre HRC rear hubs

Tekno have introduced the high roll centre HRC rear hubs for the SCT.3 and SL kits. By lowering the hinge pin location compared to the stock rear hubs the HRC uprights offer a raised the rear roll centre. Using the hubs increase on-power traction and stability while decreasing body roll. All of this with improved rotation into a corner and no compromise in on-power steering. To reduce wear and increase part lifespan, the hubs are moulded from durable nylon and they are for the use on the SCT410.3 and EB48SL vehicles.

Source: Tekno RC [teknorc.com]

October 21, 2016

Radtec 1/12th scale carbon fibre rear axle

Radtec have introduced a carbon fibre rear axle for 1/12th scale pan cars. Made by 2016 1/12th scale World Champions Roche, the axle utilises a precision-ground carbon shaft and a lightweight black-anodises inner diff plate holder. The rear axle is of standard dimensions and fits most of today’s 1/12th scale pan cars.

Source: Radtec [radtec-rc.com]

October 21, 2016

Australian National Title & FEMCA Champs – Report

Jeff Hamon takes out the Australian On-Road IC National Title and FEMCA Championship in the 1/8th scale class, held at England Park Raceway in Brendale, Queensland, Australia. Starting from the number 2 spot behind top qualifier Jesse Davis, Jeff went on to win his second 1/8th scale National Title for Mugen Seiki. Second place went to Daniel Burrows (ARC/Murnan Modified) with the third place going to the Creation Model Ltd. team driver Jesse Davis (Infinity/O.S.). In the 1/10th scale class, starting from the number 1 spot on the grid, Jesse Davis (Infinity/O.S.) went on to win followed in second place by Steven Jovanovic (Capricorn/Tesla) with third going to Luke Sinanian (Capricorn/Murnan Modified).

View the 200mm podium here

October 21, 2016

T-Works introduce XB2 titanium & aluminium options

T-Works have introduced a range of titanium and aluminium option pats for the Xray XB2C’17 and the XB4 kits. First up are the hybrid titanium and aluminium turnbuckles for the XB2C’17 2WD buggy. The set includes six turnbuckles made of high-quality titanium with an additional aluminium hex part for looks and a lower weight. Included with the links comes a suitable 4mm turnbuckle wrench. Beside the hybrid set, T-Works also offers an all-titanium kit.

Continue reading here

October 21, 2016

ROAR announces Clubman Series

ROAR in conjunction with Hobbytown Hobbyplex raceway, Fastlane Raceway and The Track have announced the new ROAR Clubman Series. This pilot program focuses on the local level of racing, it is designed to keep it simple, fair and fun. The series targets 17.5T stock racing classes using ROAR-approved non-timing ESCs and handout 17.5T motors and more information along with the basic rules can be found here.

October 21, 2016

Techra TRF suspension mounts with inserts

Techra have introduced a range of aluminium suspension mounts for Tamiya’s TRF cars. They are machined from high-quality aluminium and utilise a composite insert system, doing away with the need to use individual mounts to create alternative suspension settings. The parts replicate the standard TRF settings, they are usable with a range of Tamiya and TRF cars including the latest 419X and they come in a cool black and blue 2-tone finish with laser-etched markings for easy identification.

View more images here