Red RC » Sebastian

February 8, 2018

Yeah Racing TRX-4 aluminium damper mounts

Coming from Yeah Racing and made for Traxxas’ TRX-4 trail truck are aluminium front and rear damper mounts. Using the parts will increase overall stiffness and suspension efficiency and with the front mount also doubling as panhard bar mount, the chances of a failure of the whole assembly is greatly reduced. Both the front and rear mounts are made from high-quality aluminium, they come black anodised and are available separately.

View the rear shock mounts here

February 8, 2018

T-Works introduce full MBX8 option parts range

Coming from T-Works and made for Mugen’s new MBX8 1/8th nitro off-road buggy is a full range of option parts. On the suspension side of things the Asian company offers a 4-piece set of spring steel shock standoffs, aluminium pillow balls with titanium or spring steel shafts, hard-coated aluminium front A-arm reinforcing tubes, as well as a hard-coated 7075 aluminium suspension ball set, 64 titanium turnbuckles and also POM front upright adjuster nut spacers, POM front upright adjuster nuts with POM spacers as well as brass front upright adjuster nuts with POM spacers. As for the drivetrain compartment, T-Works offers hard-coated aluminium front and rear axle shafts, cup joints and aluminium centre driveshaft collars along spring steel diff joints. Last but not least comes a stainless steel rear chassis protector set as well as 64 titanium UFO and gold-plated steel screw sets.

View the other new parts here

February 8, 2018

Andy Tan wins Urban F1 League opener

Round 1 of the 2018 Urban F1 League saw a smaller than usual turnout, but the on-track action was just as intense, if not more so than in the previous rounds. When the dust had settled, it was several new faces that grabbed the headlines. Taking pole position after the 10-minute qualifier was newcomer, Tapana V, who laid down his best three laps in the last minute of action to dislodge Charles Lim into P2, with Andy Tan in P3. In A1, Tapana could not hold on for the win, as Andy Tan ran a mistake-free race to take the win. Tapana bounced back with a tone-to-tone victory in A2 to set up a showdown in the final leg. At the start of A3, Tapana suffered a setback as a multiple-car collision at turn 1 dropped him to the back of the pack. Andy Tan came through unscathed and managed to hang on for the win from a hard-charging Patrick Ong.

View the final results here

February 7, 2018

Traxxas introduce new E-Revo VXL monster truck

Traxxas’ popular E-Revo monster truck has received a massive overhaul with the 2018 edition being considered faster and stronger than ever before. The truck builds on an innovative low centre of gravity chassis with major components such as batteries being placed as low and close to the centreline as possible. Key areas were targeted for added strength and rigidity, such as the battery compartments and bulkhead mounts while new front and rear top braces resist flex and further protect the inboard shocks. Upgraded front and rear differentials with massively larger ring and pinion gears use over twice as much steel for extreme durability while heavy weight oil gives them the performance feel of limited slip differentials. The steel drive cups fit over 8mm hardened steel output shafts which ride on oversized sealed bearings.

Continue reading here

February 7, 2018

Speedzone 6000mAh 4S LiHV battery pack

Coming from Speedzone is their new 6000mAh 4S LiHV battery pack for 1/8th scale applications. Made from high-performance 100C cells the back measures 138.5×46.5x49mm and it weighs in at 556g. The hardcase battery comes pre-wired with an industry-standard balance and T-plug power connector and it is available now.

Source: Speedzone [speedzoneusa.com]

February 7, 2018

Adam Drake wins at Thunder Alley club race

Thunder Alley of Beaumont, California held a club race this past weekend that attracted some of the state’s fastest off-road racers. In the Expert Nitro Buggy A-main it was Mugen’s Adam Drake with the win in the 20-minute encounter from new Serpent signing, Cody King who ended the race some 4 seconds short of Adam. In 3rd and a lap down Mugen’s Anthony Westergaard completed the top 3 podium result.

Image: Adam Drake

February 7, 2018

Capricorn C803 short rear driveshafts

Made for the C803 on-road car are Capricorn’s new shorter rear driveshafts. 1.5mm shorter in length than the standard items, the driveshafts allow to run the car with a more narrow rear track width which can be beneficial on tight and technical tracks or even necessary when running large off-set wheels.

Source: Capricorn [capricornrc.com]

February 7, 2018

1up Racing on-road pit board with Quikcheck

1up Racing have introduced their all-new on-road pit board that offers an oversized 300mm x 450mm matte black work area with enough space to mark 1/10th touring car bodies for accurate cutting. Each pit board includes a QuikChek decal for quick reference of wheelbase, popular bearing and screw sizes, and a 300mm ruler. A gloss black band surrounds the work area completing the clean look. The QuikChek is available with Blue, Red, Orange, Pink, Green or Gray accents to match any pit space and the QuikCheck decal can also be personalised with a custom name.

View the QuikCheck feature here