Red RC » Sebastian

February 7, 2018

Ishioka & Knapp sweep 2018 Snowbird

Last weekend’s 2018 Snowbird Nationals saw 600 entries spread across many electric on-road classes and in the hotly contested Formula category it was Japan’s Hayato Ishioka (CRC). However, CRC teammates Andrew Knapp and Jeff Dayger were hot on his heels but after the 5-minute single A-main it was still Hayato who would hold the upper hand with Andrew ending the race only 0.3 seconds short of the Japanese ace. In third and only a tenth of a second short of Andrew, Michael Hanulec would end the race on the 3 spot. Over in 1/12th 17.5T it was Andrew Knapp who TQ’d all four qualifiers and went on to win the main. Robbie Dodge would come in 2nd, 0.8 seconds down on Andrew while Joe Trandell snatched the final podium spot.

Source: CRC [teamcrc.com]

February 7, 2018

RC Speed Secrets YZ-2 DTM titanium screw kits

Coming from RC Speed Secrets and made for the Yokomo YZ-2 DTM 2WD buggy are two new titanium screw kits. Available as 70-pieces upper and 26-pieces lower set, the fasteners are made or Grade 5 quality titanium and they feature deep sockets for easier wrenching and less stress on both the screw heads and tool tips. The sets are available in a rainbow/oil slick finish or in a stealth black finish to make them stand out.

View the chassis bottom screw set here

February 7, 2018

Yeah Racing YD2S black aluminium gearbox

Yeah Racing have introduced their new quick release aluminium gearbox for the Yokomo YD2S drift car. The transmission housing compromises of two sturdy bulkheads and small differential clamps that allow to extract the rear differential after undoing only four screws for swift and easy maintenance tasks and setup changes. The gearbox is machined from high-quality aluminium, it comes black anodised, with machined edge details and laser-etched markings.

View more images here

February 7, 2018

Vigor RC T4 RF+2 ARS suspension mounts

Coming from Vigor RC and made for the Xray T4 2018 and 2017 cars is a RF+2mm ARS suspension mount. The updated geometry makes for parallel suspension pins, rather than having them angled as it is standard, which results in improved rear end grip and smoother suspension operation when using the ARS system. In addition the pivot ball mount was lowered by 1mm for increased toe angle adjustability.

View another image here

February 7, 2018

Avid EB410 carbon fibre battery brace

Coming from Avid is a carbon fibre battery brace for the Tekno RC Eb410 buggy. The part is made from 100 percent carbon fibre and designed for easy balance plug access no matter how it is installed. The brace works with stock or aftermarket hardware and is available separately or including a black aluminium thumbwheel.

View another image here

February 6, 2018

Infinity IF18 1/8th nitro on-road kit

Based on Infinity’s 2017 World Championship winning 1/8th nitro on-road platform comes the new IF18. An evolution of that winning package the car features a number of significant updates including completely new front and rear 7075 aluminium bulkhead designs that allow for easier access to the drivetrain components. Giving the car a new suspension geometry in combination with longer suspension arms for improved stability, the design has taken into account ease of access to drastically improve the ability to carry out maintenance. The geometry is fully adjustable using bushings and spacers included as part of the kit. Three Ackermann positions are available and all moulded parts are produced from a special composite compound to ensure the best performance without compromising durability. Front stabiliser is a piano-wire type operating through bearings that now feature a new plastic bushing to reduce wear.

Continue reading here

February 6, 2018

Diatta Collymore teams up with Wallace Motorsports

Wallace Motorsports have announced Diatta Collymore from New York City, NY as an official team driver and representative for WRC, Ielasi Tuned Engines, and Hot Race Tyres in the US. Diatta as well as being a top contender on the race circuit, brings years of industry experience to the table. Diatta had the following to say about the deal:

First off I’d like to thank all my previous sponsors RC America, Desoto Racing, Steve Odonnell, Reds Racing, Picco, & Pro Level Rc for the support in the past. Now about this new venture, I’m very excited to be working directly with Ben Wallace and an entirely motivated close knit group of people behind the scenes. Wallace Motorsports is more of a family than just another rc distributer or business. Are goal is to help to grow this sport and after experiencing it my self I can say that we are a true Team all in support of each other. Expect to see me track side at even more races through out 2018 both Nitro and Electric. I’d like to thank Ben Wallace for the opportunity and the support. I’d also like to thank Melvin Aulston, Troy Perry, and TJ Bradely for being key players in the daily functions of our brand.

Source: Wallace Motorsports [wallacemotorsports.net]

February 6, 2018

Factory RC YZ-4 SF carbon fibre option parts

Factory RC have announced the release of new carbon fibre option parts for the Yokomo YZ-4 SF buggy in the form of front and rear shock towers as well as a LiPo battery strap. The shock towers are both cut from high-quality 4mm black carbon fibre and the front shock stay comes milled out to reduce weight and increase airflow onto the front of the body for additional down force while the rear variant is marked for easy identification. As for the battery strap, the part sports an opening to allow in-car charging while using the balance port of the battery so there is no longer need to remove the back or strap to charge in the car. The brace uses standard hardware and is compatible with both standard height or low profile shorty packs. All parts are equipped with Factory RC’s ”Leading Edge” chamfered edge for cool looks and greater durability.

View the other new parts here