Red RC » Axial

December 3, 2007

Axial 500cc Fuel Bottle

Axial Racing in the US have releaed this large 500cc capacity fuel bottle, similar in style to that released by Serpent back in June. Made using a soft, long lasting and easy to squeeze bottle material, the spout is made from green anodised aluminum and sports a laser etched Axial logo, while to get the fuel into the tank the end of the spout has a curved neck. Tinted plastic protects fuel from sunlight and still allows you to see level of fuel in bottle, while a rubber cap prevents spilling during transport.

Source: Axial Racing [axialracing.com]

October 16, 2007

Axial Racing Reamer & T-shirt

Axial Racing Reamer

More news from Axial Racing with the release of a new body reamer and team t-shirt. The reamer comes supplied with a tip cap and features a lightweight aluminum anodized green body with a comfortable knurled grip while the tip is super sharp and cuts fast, clean, precise holes with razor sharp flutes that are design to efficiently remove debris. Also new for the team racers, and users of their products, is a new black t-shirt that sports the Axial logo on the front in green and a small logo on the sleeve and the rear.

Click here to see the t-shirt… content

October 16, 2007

Axial Racing socket drivers

Axial Racing have release a new set of socket drivers to add to this current range of race tools. Fitting in line with their other tools, they have been designed to be easy to use ergonomically designed handles to fit in your hand better and provide grip even when your hands are slick from oil and grease. The socket driver tips are sold in a number of sizes with the metric set including a 4.5mm, 5.0mm, 5.5mm, 6.0mm, and 7.0mm while the Imperial set has a 3/16”, 1/4”, 5/16”, 11/32” and 3/8” drivers.

Source: Axial Racing [axialracing.com]

July 17, 2007

Axial Flywheel Wrench

Axial Racing have released this flywheel wrench for helping you to tighten and loosen the flywheel nut on your engine. Machined from 6mm 6061 grey anodised aluminium, and sporting the Axial logo, this tool fits most 2, 3 and 4 shoe flywheels on the market. Available now.

Source: Axial Racing [axialracing.com]

April 19, 2007

Job openings at Axial Racing

Axial Racing are hiring. If you are based in the US, California to be exact, and you have always dreamed of working in the RC Industry then Axial could be place for you. They are loking to fill two positions, one for a Marketing Specialist with an emphasis on graphic & web design and the other position is a Customer Service Technician.

If you are interested in knowing more go here.

March 31, 2007

Axial Racing flywheel remover

Axial Racing tools

More new stuff from Axial Racing, this time its some new tools, with the release of this nice green anodised, machined billet aluminum, flywheel remover. Designed to fit most flywheels it allows you to easily pull the flywheel from your engine without causing any damage to the flywheel or end of the shaft. Also officially released by Axial Racing is their new set of hex driver that we showed a while back, color coded and laser etched for easier identification, these tools were designed to be easier to use than most. The handles were ergonomically designed to fit in your hand better and provide grip even when your hands are slick from oil and grease.

Click here to see the tools… content

March 31, 2007

Axial Racing 28RR Spec 1 Engine

Axial Racing have announced the release of their 28RR Spec 1 Engine that is suitable for truggies and monster trucks. The 28RR is designed to rev higher while still maintaining superior levels of torque and the rather nice cooling head helps to lower center of gravity as well as increase cooling capacity.

The 28RR Spec 1 is a .28 cubic inch big block engine featuring a machined cast aluminum heat-sink head for extra cooling, dual bushing aluminum connecting rod, true ABC chrome sleeve construction for durability, and a three needle 9.0mm slide carburetor (including 8.0 & 8.5mm optional venturiâ€™s) with a composite body for better performance at higher temperatures. The carburetor features a factory re-set line on the high speed needle, and flush needles making re-setting, to baseline factory specifications, quick and easy.

Source: Axial Racing [axialracing.com]

March 21, 2007

Axial range of tools

Axial have given RC Car Action the scoop on their new set of tools, and we havent been given much more information than that, except that they are available in a wide range of tips, and those tips are replaceable, and from the picture we can see that the larger sizes are available also with ball tips. The handles use some beefy screw driver handles that look grippy and comfortable and sport a colour coded tip mount, although i personally still prefer the Hudy method of tool size recognition.

Source: RCCA [radiocontrolzone.com]