Red RC » BMT

June 28, 2017

BMT introduce new 016GT option parts

Italian company BMT has introduced new option parts for the 016GT 1/8th on-road car. First up is a new aluminium main chassis plate that is made using a different grade material. The updated chassis will produce more overall traction while improving handling at the same time. Also new are front lower arm mounts in +2mm specification. The parts raise the suspension attachment point by 2mm which results in a lowered roll centre which is meant to improve steering especially on lower grip tracks. Also new and made for the front of the 016GT is a front bulkhead brace for improved steering emphasis while new 2mm front bulkhead spacers allow to change the front dynamic camber. Last but not least comes a new 17T 1st gear pinion.

View the other new parts here

June 8, 2017

BMT 701 & 984 option parts

New from BMT for their 701 and 984 platforms come these option parts, beginning with this brass battery support. Adding an additional 50 grams to the 984 it can be used to fine tune the car’s balance and is a direct replacement for the original part. For the 701 there are two different pairs of wheel hubs in -0.75mm and +0.75mm versions as well as updated reinforced engine mounts.

View the other new products here

May 23, 2017

BMT 984 carbon fibre steering knuckle lever

Italian company BMT have introduced a new carbon fibre steering block lever for the 984 1/8th on-road car. The updated geometry will lead to an easier to drive car while also offering improved overall steering. The part is a direct fit and it features two mounting positions for the outer steering link ball stud.

Source: BMT [bmt-team.com]

May 7, 2017

BMT 701 hard compound pulley set

Italian company BMT have introduced a set of hard belt pulleys for the 701 on-road kit. Made from an orange colour composite material and harder than the stock parts, the items are best used in high temperature conditions and when the traction is high. Included are also differential cases with all parts are also being available separately.

Source: BMT [bmt-team.com]

May 1, 2017

BMT 701 hard suspension arm set

Italian company BMT has introduced a hard suspension arm set for the 701 1/10th 200mm touring car. Moulded from a harder compound the arms offer increased stiffness which results in improved handling and precision when running in high grip and/or high temperature conditions.

Source: BMT [bmt-team.com]

March 2, 2017

BMT 016GT 1/8th nitro GT kit

Italian company BMT has revealed full details on their all-new 016GT 1/8th nitro GT car. Building on the success of the 011, the kit was developed to provide an ultra low centre of gravity which was achieved by a newly shaped fuel tank and a laydown servo configuration. A specially designed electronics support allows for a swift release after undoing only three screws. Also new is the lightweight transmission with 2-speed gearbox being as light as possible for improved acceleration, braking and mileage while also utilising 0.8 module gears for greater overall drivetrain efficiency.

Continue reading here

January 27, 2017

BMT 984 high traction rear end upgrade set

BMT from Italy have introduced the high traction rear end upgrade set for the 984 on-road car. The included parts move the inner lower suspension pins closer together which results in improved overall traction, stability and higher corner speeds. On top of this the rear end is also more stable under braking. Included comes a new rear bulkhead cover, a new rear lower arm mount and redesigned, longer damper mounts.

Source: BMT [bmt-team.com]

December 23, 2016

BMT 984 low-friction pulley set & long ball cups

Italian company BMT have new optional parts for the 984 1/8th on-road car available. First up is a low-friction belt pulley set that uses a newly formulated composite material which creates a super-smooth surface for a more efficient drivetrain and overall upped performance. As the material is softer than the standard parts the wear rate is slightly higher. Included in the set are all drivetrain pulleys including the front spool and rear axle parts. Also new for the 984 is a set of extra long ball cups that come in handy when building longer rear shocks which can be helpful in certain track conditions.

View the extra long ball cups here