Red RC » Destiny

June 14, 2019

Destiny RX-10 new design suspension arms

Destiny have announced the release of new design suspension arms for RX-10 series of touring cars. Offering improved traction and reliability the full-face arms are available in two different length and using different lower shock mounting positions which allows to fine-tune the suspension geometry. Available are the original geometry Type A arms (front 53mm/32.5mm, rear 54mm/38.5mm) as well as the new geometry Type B (front 53mm/31.5mm, rear 54mm/39.5mm), and new length Type C (52mm/31.5mm, rear 55/39.5mm) and Type D (52mm/30.5mm, rear 55mm/40.5mm) arm sets.

Source: Destiny [destinyracing.jp]

May 29, 2019

Destiny RX-10FF cross chassis battery mount set

Coming for the Destiny RX-10FF 1/10th FWD touring car is a cross chassis battery mount set. The kit allows for a floating or O-ring type battery mounting, the latter making for a slightly stiffer chassis setup while the mount also allows for forward and backward battery placement in order to fine-tune the car’s weight bias. Included in the set is all needed mounting hardware.

View another image here

January 28, 2019

Destiny VD12-2019 conversion kits

Coming soon from Destiny are two 2019 specification conversion kits for the VD12 1/12th scale pan car. Available as carbon or aluminium chassis version, the kits include new main chassis plates, new lower pod plates as well as updated floating servo mount and centre shock plates. Also included are redesigned aluminium power pod side plates. The conversions were thoroughly tested by Destiny’s Yugo Nagashima and they will hit stores soon.

View the alloy chassis conversion here

September 18, 2018

Destiny introduce new RX-10SR optionals

Made for the RX-10SR and RX-10S electric touring cars are several new optionals from Destiny. First up is the V2 aluminium battery bracket set for the SR and S variants. The set attaches directly to the chassis, doing away with the need to use fibre-reinforced tape and thus ensuring tweak-free battery mounting as the multi-piece battery locators and retainers only slightly touch the battery case. The set is made up using grey anodised aluminium and machined carbon fibre parts.

Continue reading here

June 8, 2018

Destiny RX-10SR alloy steering rack support

Destiny have introduced an aluminium steering rack support for the RX-10SR touring car. The alloy brace mounts below the steering ball races, slightly clamping the steering slider to ensure greater durability in the event of a crash as under certain conditions the rail was prone becoming misaligned and even disconnecting at all from the bearings. The support is machined from high-quality aluminium and it comes grey anodised for wear and looks.

View another image here

April 17, 2018

Destiny RX-10SR solid alloy & brass suspension mounts

Coming from Destiny and made for the RX-10SR touring car are new 1-piece FR Type A and Type B suspension mounts. The solid mounts are designed to replace the standard 2-piece suspension hangers with either lightweight aluminium or heavy brass items in order to fine-tune both chassis flex and weight bias. The mounts are available separately and they come with engraved markings for easy identification.

View the other suspension mounts here

April 11, 2018

Bezerk RC RX-10SR carbon fibre top decks

Available now from Bezerk RC are two carbon fibre top decks for the Destiny RX-10SR touring car. Coming in a standard and a split-type design, the top decks are available in 1.6mm, 1.8mm and 2.0mm carbon fibre for added tuneability in combination with carbon fibre or alloy lower main plates.

Source: Bezerk RC [bezerk.com.au]

March 2, 2018

Destiny RX-10SR brass weight option parts

Destiny have introduced a new brass centre balance weight as well as brass suspension mounts for the RX-10SR touring car. The centre brass weight weighs in at 35g and it was designed to not only add weight to the most central area of the car but it also acts as a sturdy battery stop. The weight comes in a shiny natural finish and with laser-etched markings. Also new are a total of five suspension mounts in the form of 1-piece A, B, and C suspension hangers along split A and B mounts. All are machined from heavy brass material to strategically add weight in the front or rear area of the car in order to achieve the minimum weight or to fine-tune the overall weight balance. The parts come in a natural finish and laser-etched for easy identification.

View the other new parts here