Red RC » KM Racing

December 1, 2007

KM Racing NT1 parts and Airfilter

KM Racing’s love affair with the Xray NT1 continues with the release of more new products this popular 200mm. First up are some new brake pads that have been mounted on 2mm thick carbon fibre plates and sport a premounted brake material that promises to deliver consistent fade free braking while also being very durable. Also new are two 2mm thick carbon fibre inserts for the cars servo saver, that offers 4 more Ackermann settings and adds strength to this area. Lastly for the NT1, for now, are a set of 4mm offset aluminum hex wheel adaptors that use a centrally located grub screw to attach itself to the wheel axle. Also new from KM, but for all on road gas cars, is a foam air filter that is suitable for .12 to .21 size engines and has a base made from super soft rubber for making it easy to mount to the carburettor.

Click more to see the other products… content

November 23, 2007

KM Racing release more NT1 options

More new releases from KM Racing, and yet more parts for the Xray NT1, with the release of more aluminium options for the Slovakian company’s 200mm chassis. First up is this aluminium rear back plate that replaces the original plastic part and helps increase strength to the structure of this area in the event of a rear impact. Also new from KM is a set of 4 spring cap bottoms that have been made from gun metal anodised aluminium and further lightened through holes and extra machining. Finally, for the clutch of the NT1, is a new aluminium spring cup and aluminium clutch shoe plate that are very light and as such provide a performance advantage over the original parts.

Click here to see the other parts… content

November 23, 2007

KM Racing Clutch bells

Following on from the release of the lightweight clutch bell housing for the Xray NT1 back in September, KM Racing have now released a similar product for both the Kyosho V-One RRR and Mugen MTX4. Designed to be super lightweight, with the maximum amount of material removed without sacrificing strength, both bell housings has been made from a new hardened steel material for extra durability.

Click here to see the Mugen bell housing… content

November 20, 2007

KM Racing Droop Blocks & Gauge

KM Racing have released some new tools for on road racers in the form of a new droop gauge and droop blocks. The red anodised blocks (above) have been machined from aluminium, feature the KM Racing logo, and provide an accurate base from which to measure your cars downstop settings. Designed to accompany the blocks, is a new red anodised aluminium droop gauge that can measure between -3mm to +10mm in half mm increments, allowing for very accurate settings.

Click more to see the droop gauge… content

November 12, 2007

KM Racing NT1 titanium 2-speed shaft

Continuing on with the release of hop up parts for the Xray NT1, comes yet another part from KM Racing. This 2-speed gearbox shaft is a direct replacement for the stock version and has been made from a solid piece of lightweight, yet very strong, titanium which helps the overall weight of the car as well as helping reduce rotating mass.

Source: KM Racing [km-rc.com]

October 16, 2007

KM Racing NT1 anti-roll bars

KM Racing continue to release parts for the Xray NT1 with the introduction of a complete set of rear anti-roll bars for the car. Available in a number of different thicknesses to help set-up your car, they come in 1.7mm, 1.8mm, 1.9mm, 2.1mm, 2.2mm & 2.3mm and are a direct replacement for the original parts.

Click here to see the part mounted… content

September 28, 2007

KM Racing Clutch bell & Battery trays

KM Racing have informed us about some of their new and upcoming products which are suitable for a number of different 1/10th scale 200mm cars. The first product is this lightweight steel clutch bell, which is suitable for use on the Xray NT1, the many holes reduce the rotating weight of this part making for a more responsive clutch. KM have also released a number of flexible FRP fibre battery trays, one each for the Kyosho V-One, Mugen MTX4 and the Xray NT1, all of which feature machining on the underside to protect the battery tape from scuffing on the ground and all sport the KM Racing logo.

Click here to see the different battery trays… content

September 25, 2007

KM Racing release more NT1 options

KM Racing NT1 options

KM Racing have released yet more parts for the Xray NT1 1/10th scale car with the release of 2 new products. The first product is an adjustable belt tension plate that has been made from 2.5mm thick carbon fibre and offers a neat way to adjust the cars side belt tension. Also new from KM are lightweight shaft spacers which have been made from aluminium and lightened with holes. The spacers come in pairs and are available in standard silver colour and anodised grey.

Click here to see the other products… content