Red RC » Kyosho

September 24, 2019

Kyosho Psycho Kruiser VE 2.0 RTR monster truck

Coming soon from Kyosho is their new Psycho Kruiser VE 2.0 1/8th electric brushless monster truck. Utilising design features known from the World Championship winning Inferno platform, the truck utilises a 3-diff shaft-driven drivetrain with hardened gears, front and rear universal driveshafts as well as full ball bearings. The reinforced suspension components and big bore threaded aluminium shock absorbers are keeping the tyres in the ground when the going gets tough while the Kyosho Speed House Torx8 2000vK brushless motor allows for speeds of up to 80km/h when using a 6S LiPo battery pack. The ready-to-run package is rounded out by a 2.4GHz Syncro KT-231P+ transmitter and a water-proof steering servo.

View a list of the features and more images here

September 24, 2019

Kyosho seal cartridge & turnbuckle wrench

Kyosho have announced the soon release of their new shock seal cartridge and turnbuckle wrench specially made for their Ultima RB7 and Lazer ZX7 buggies. The tool, that is machined from aluminium and that comes with an anodised surface finish for wear and looks, will help with shock building, maintenance and setup as it helps to fasten or loosen the lower seal cartridge cap more easily and conveniently. In addition the compact tool features 3.5mm and 5.5mm turnbuckle wrenches for toe and camber setting changes on the fly.

Source: Kyosho [kyosho.com]

September 21, 2019

T-Works MP9 series steel CVD sets

T-Works have announced the release of new steel CVD driveshaft sets for Kyosho Inferno MP9 based vehicles. Available for the front of the MP9 TKI4, MP9E Evo and GT3 is a 93mm set while for the rear a 91mm set suits the MP9 TKI3 and GT3 kits. The driveshafts are machined from high-quality steel material, they include precision-ground wheel axles as well as couplers and cup-shaped cross pin retainers. The driveshafts come as pairs and they are available now.

View the 91mm driveshaft set here

September 20, 2019

T-Works MP10 steel centre driveshaft set

T-Works are busy adding more Kyosho Inferno MP10 released optionals to their range with the latest being a steel centre dogbone driveshaft set. It included two high-quality steel 85mm and 119mm centre driveshafts as well as heavy duty couplers for the diff input gears. Using dogbone-style driveshafts can help to free up the drivetrain under load which changes the drivetrain’s behaviour, resulting in improved steering up front and greater traction in the rear.

Source: T-Works [rc-tworks.com]

September 18, 2019

Kyosho introduce new Fazer option parts

Kyosho have announced the release of new option parts for their Fazer series of on-road and off-road kits. First up is an aluminium servo saver kit that replaces the standard plastic parts for a more sturdy and precise construction. This results in a more accurate steering feeling and improved durability. The servo saver is usable for all Fazer Mk2 and FZ02 kits.

content

September 18, 2019

T-Works Kyosho & Mugen black upper shock caps

T-Works have introduced two new aluminium upper shock caps sets, coming for the Kyosho MP10 and MP9 range of cars as well as the Mugen MBX8 and MBX7 kits. Both are machined from high-quality 7075-T6 aluminium and they come with a black colour hard-coated surface for improved durability. The sets include shock bushings as well as two types of volume compensators in soft and hard specification, allowing to adjust the shock action under compression. The Kyosho set is usable with the MP10, MP9 TKI 3 and TKI4 as well as the MP9E and MP9E Evo. The Mugen caps are usable with all MBX8 and MBX7 kits.

View the Mugen shock caps here

September 17, 2019

T-Works MP10/MP9 alloy offset shock standoffs

T-Works have introduced new offset aluminium shock standoffs for the Kyosho MP10 and MP9 series buggies. The parts are machined from aircraft-grade 7075-T6 aluminium, they are hard-anodised for wear and will reduce the overall weight while lowering the centre of gravity. The shock mounts are available in +4mm and +5mm variants with the added length changing the rear shock’s mounting angle which can be beneficial in certain track conditions. The standoffs are usable for the MP10, MP9 TKI3 and TKI4 as well as the MP9e Evo and they come in sets of two including suitable shock mounting screws.

View the +5mm standoffs here

September 4, 2019

Pilot Orbit 1/10th buggy ceramic bearing sets

Coming from Pilot RC Products for many of today’s competition 1/10th buggy kits are Orbit ceramic ball bearings sets. The ball races are precision crafted and produced from highest grade materials governing them the ABEC rating grade 7. They are of a stainless steel rings and Si3N4 ceramic balls design and they come pre-oiled with 1up clear bearing oil for ultra free spinning and increased drivetrain efficiency. Included with each bearing kit is a complimentary bottle of 1up clear bearing lube to ensure the bearings remain properly lubed. The sets are available for many Team Associated, TLR, Yokomo and Kyosho 2WD and 4WD kits as well as the serpent Spyder SRX-2 MM.

Source: Pilot RC Products [pilotrcproducts.com]