Red RC » Kyosho

November 9, 2016

Kyosho S.R.T. Suzuki RGV1992 1/8th bike kit

Since its first release in 1992, Kyosho’s long selling Hanging On Racer model is still as popular as ever. The S.D.S.S semi direct steering system delivers high performance fully independent motion with the rider figure construction incorporating 13 different connections so it hangs on to the bike as it leans into corners. The result is driving performance just like a real motorbike that is easy enough for anyone to control. In addition, each section of the bike is designed with an incredible level of scale detail from the body cowl, inverted front fork suspension, brake disk and calipers, wheels, drive chain, sprocket and asymmetrical swing arm to recreate a model of display standard quality.

content

October 18, 2016

Kyosho MP9e 1/8th E-Buggy kit – Detail images

Following yesterday’s introduction of the forthcoming Inferno MP9e TKI4 1/8th E-Buggy, Kyosho today released more detailed images of the company’s top-of-the-foodchain kit. The version 4 will include some subtle updates and changes previously available only with the nitro-powered TKI4 kit but now also EP racers can benefit of 2mm longer front A-arms, the updated +2mm roll centre front shock stay and upper arm mounts as well as an updated wing mount that allows to shift the wing up and down, forth and back. The kit is rounded out by an adjustable rear wing with additional wickerbill and it is set for a release this November.

View more images here

October 17, 2016

Kyosho Inferno MP9e TKI4 – Coming soon

Kyosho have released first information on the forthcoming Inferno MP9e TKI4 1/8th E-buggy kit. Based off of the MP9e TKI the version 4 kit features many parts already utilised by the TKI4 nitro buggy such as longer front A-arms, an H-S front shock tower and +2mm front upper arm mounts, as well as an updated rear wing stay and rear wing. Other parts include 1.5×5 shock pistons, aluminium steering knuckles, a reinforced servo saver and a 2-piece motor mount. The kit will become available by November.

Source: Kyosho [kyosho.com]

October 15, 2016

T-Works Kyosho 5.8mm aluminium pivot balls

T-Works have introduced a set of 5.8mm 7075-T6 pivot balls for Kyosho buggies such as the RB6, RZ6 and ZX6. Made from high-quality material and coming hard-anodised for wear the lightweight parts replace the somewhat heavy kit steel balls to achieve an overall lower weight while also reducing unsprung masses. The balls come in sets of four.

Source: T-Works [rc-tworks.com]

October 12, 2016

Kyosho MT-4WD Psycho Kruiser VE 1/8th monster truck

Kyosho have introduced the MT-4WD Psycho Kruiser VE 1/8th scale ReadySet monster truck. The vehicles is based on a low-profile 4WD 3-differential chassis comparable to the popular Inferno truggy and it is equipped with a 1500kv Team Orion Neon 7 brushless motor and a 6S LiPo-compatible brushless controller. A shock-resistant, hardened battery case protects the LiPo battery while big bore threaded aluminium shock absorbers, aluminium shock towers and front and rear anti-roll bars keep the truck on track despite the extreme power it is able to develop. The included Syncro KT-201 2.4GHz radio system offers a fail-safe function for the unlikely event of signal loss and the included KS-203 steering servo was taken over from the 1/7th scale Scorpion XXL to ensure steering authority when the going gets tough. The ready-to-run truck is rounded out by an aerodynamic bodyshell and grippy tyres on multi-spoke rims.

content

October 5, 2016

T-Works MP9 TKI4 hard-coated aluminium pivot balls

Coming from T-Works and made for Kyosho’s Inferno MP9 TKI4 off-road buggy is a set of hard-coated aluminium pivot balls. Machined from aircraft-grade 7075-T6 aluminium and coming hard-anodised as a protection from excessive wear, the parts offer a lower weight than the standard steel balls, resulting in a reduced overall weight and thus improved performance.

Source: T-Works [rc-tworks.com]

September 15, 2016

Kyosho Lazer ZX6.6 4WD off-road buggy kit

Following the introduction of the Ultima RB6.6 Kyosho have now announced the soon release of the upgraded Lazer ZX6.6 4WD kit. The buggy is designed to meet the increased demands of the modern racing scene for more power and higher grip. For increased traction and stability on high grip surfaces, the optional aluminium HD main chassis is included as standard. Changes around the centre gear from the slipper clutch to the diff realise smooth traction on all surface conditions and in addition, the introduction of the gullwing type rear suspension arms from the RB6.6 allows longer shock stroke for improved surface tracing through corners and performance over surface gaps. These changes combine to lift the overall performance and result in an improved total balance of the machine. The kit will hit stores in November.

View the main features here

September 14, 2016

Kyosho Optima ball differential kit

Kyosho have introduced the optional ball differential kit for the re-release Optima 1/10th scale 4WD buggy. Designed for the use in belt-drive configuration the set includes all needed parts to build one rear differential but it is understood that the diff can also be run in the front of the buggy. Using the unit can improve handling both on slippery and also high-grip tracks and included with the set come all needed parts including suitable greases.

Source: Kyosho [kyoshoamerica.com]