Red RC » Mugen

September 15, 2021

36Mood MBX8 aluminium rear hubs

New from 36Mood, brand of 2012 World Champion Robert Batlle, is this aluminium rear hubs for your Mugen MBX7, MBX7R or MBX8 kits. With these hubs you have an extra option on your rear roll centre, having a higher hole position and you can change your rear toe in with the three different long life inserts (kit comes with insert no.1). The design also has the standard up and down position if you need more traction or less traction in your track. These hubs come with all mounting hardware.

View more images of the uprights here

September 9, 2021

T-Works MTC1 &T4’21 ECS driveshafts

T-Works have released new ECS driveshafts for the Mugen MTC1 and the Xray T4’21. Made from high-quality spring steel for maximum durability, the dual coupling shafts reduce the chattering of the front suspension in corners and are a direct replacement for the stock parts. The Mugen versions sport a 40.5mm shaft length while the Xray versions are 41mm and come supplied with bearings.

View the Xray versions here

August 31, 2021

T-Works MBX8 & RC8B3 rear chassis brace mount

T-Works have expanded their range of rear tension rod mounts to include the Mugen MBX8 and Associated RC8B3.2. The braces are machined from 7075 T6 aluminium which has been anodised black and finished with chamfered edging. The new parts help improve strength and increase stiffness over the stock parts and come supplied with the relevant mounting hardware.

View the RC8B3 version here

August 19, 2021

Deadfly MTC2 weighted fully adjustable LiPo holder

More new items from Deadfly for the Mugen MTC2 with a the introduction of their LCG weighted fully adjustable LiPo holder set. Especially designed for the use of ULCG batteries it incorporates 2mm of forth and back adjustment in the lower spacer to ensure a perfect fit. The set maintains the factory’s left to right moment within the L-shaped hooks for the perfect weight balance and the 15mm posts fit perfectly into the recess within L-shaped hooks, with a low profile M3 nut in the other ensuring the whole system can be tightened and not move. Supplied with the carbon fibre DeadFly twist clamp. The brass hooks are also available separately.

View more images of the set here

August 19, 2021

Mugen Seiki MTC2 FWD 1/10 touring car

Following the successful launch of the MTC2 electric touring car, Mugen Seiki have announced the MTC2 FWD. The kit is based off the MTC2 touring car and uses the same high-quality materials and parts. Ronald Völker was instrumental in the testing and development of the MTC2 FWD. The car has a mid-front motor layout and uses a lot of parts from the MTC2 electric touring car. The focus when designing and testing the MTC2 FWD was to get the best weight distribution along with reaching the weight limits for this class. Another focus was to maximise the number of interchangeable parts from the MTC2 to the MTC2 FWD which is key for racers, hobby shops, and dealers. The main chassis features multiple flex options as well as spots to mount additional weight while the one piece upper deck also offers multiple flex options as well as the possibility to use huge size pinions. The car comes standard with a 42gram front weight sitting under the front differential as well as a 85gram bumper weight with the possibility to add three additional 10gram weights. The rear of the car sports a body mount with horizontal body posts as well as vertical ones while the front comes with included body stoppers with additional spacers for use with FWD type bodyshells.

View more images of the MTC2 FWD here

August 18, 2021

Deadfly MTC2 balance weights

From Deadfly come more new brass products for the Mugen MTC2 consisting of three different balance weights. Designed and machined in house out of high quality natural 3mm brass they have been finished with the very distinctive DeadFly logo and wing pattern. The different versions include front, forward and rear weights providing you with an array of balance options.

View the other new balance weights here

August 6, 2021

Ninja JX21-B06 offroad buggy engine

Mugen Seiki have presented their new Ninja JX21-B06 offroad buggy engine. The innovative JX21-B06 includes the easy to tune 22E carburettor with 6.5mm reducer which provides smoother, easy to drive, power and increased fuel efficiency. The B06 has a square bore and stroke which has smoother power characteristics and improved fuel consumption. Internally, the DLC coated crankshaft is tungsten weighted while on top, the lightweight cooling head provides exceptional cooling and stable operating temperatures.

View more details & images here

August 2, 2021

OfficinaRC MTC2 titanium upperdeck screws

OfficinaRC is pleased to present these new solid titanium machined screws for the Mugen MTC2. The titanium screw replaces the original screws and are used to mount the MTC2 top deck. These replacement titanium screws improve strength and endurance thanks to their high quality material. Ti-6Al4V is the most widely used titanium alloy in the motorsport and aerospace market. It contains 6% aluminium and 4% vanadium, an excellent combination of endurance to efforts and toughness, with extra resistance to corrosion.

View more images of the screws here