Red RC » Mugen

September 18, 2019

T-Works Kyosho & Mugen black upper shock caps

T-Works have introduced two new aluminium upper shock caps sets, coming for the Kyosho MP10 and MP9 range of cars as well as the Mugen MBX8 and MBX7 kits. Both are machined from high-quality 7075-T6 aluminium and they come with a black colour hard-coated surface for improved durability. The sets include shock bushings as well as two types of volume compensators in soft and hard specification, allowing to adjust the shock action under compression. The Kyosho set is usable with the MP10, MP9 TKI 3 and TKI4 as well as the MP9E and MP9E Evo. The Mugen caps are usable with all MBX8 and MBX7 kits.

View the Mugen shock caps here

September 13, 2019

Bittydesign Vision MBX8 pre-cut buggy body shell

Bittydesign have introduced their all-new Vision 1/8th nitro buggy body shell for the Mugen MBX8. Designed in collaboration with Nitro Buggy World Champion, Robert Batlle the body will offer an easier to drive and more balanced feeling compared to the Mugen kit body thanks to a new cabin, side pod and rear side flaps design that optimises the aerodynamic characteristics. In addition a flap behind the engine area guides the air towards the rear wing for a smoother and more directed airflow around the shock tower and lower wing mount. The body comes moulded from high-quality 1mm Lexan polycarbonate and it is laser pre-cut to fit all MBX8 and older MBX7 models. Included comes a pre-cut decal sheet as well as window masks.

View more images here

September 9, 2019

Mugen MBX8T dogbone centre driveshafts

Mugen have introduced dogbone centre driveshafts for the MBX8T and MBX8T Eco 1/8th scale truggies. The 88mm front and 161.5mm rear driveshafts are used in combination with the E2260 centre joint cups and they replace the respective universal driveshafts. When used in the front, the dogbone-style driveshaft will improve the steering response while using the dogbone in the rear will increase rear end traction. The parts were used by Mugen’s Ryan Maifield to win this year’s ROAR National Championship and they are available separately.

Source: Mugen [mugenseiki.com]

August 30, 2019

JConcepts S15 body for Mugen MBX8 Eco

Having released the S15 bodyshell for the Mugen MBX8 back in January, JConcepts have introduced the updated S15 for the latest MBX8 Eco. Blending performance features on the popular Silencer body with new features such as mid-body winglets and rear stabiliser kick-up, the roof of the body remains strong with the upper fin in position for stability and tracking ability. The rear drop-down area remains clean and a deep-rooted position allows maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the Mugen MBX8 Eco and older MBX7 Eco kit variants. Each S15 body supplied with window mask and decal sheet.

View more images here

August 20, 2019

Flashpoint RC 2-in-1 starter box mounts

New from Flashpoint RC for the Mugen Seiki starter box is this 2-in-1 starter box mount for the MBX8 and MBX8T. Mount the set directly to your starter box, also a direct fit for the Protek starter box, and the system allows the user to easily switch between starting both types of car simply by turning the quick adjust rear mounts 180 degrees. Made from high quality aluminium, the mounts remove the need to have separate boxes for each car, saving money and space in your pit bag. Comes supplied with all the hardware needed to mount them.

View more images & video from Adam Drake outlining the system

August 7, 2019

Xtreme Racing MBX8 wear guard

Coming from Xtreme Racing and made for the Mugen MBX8 buggy is a wear guard machined from 3mm T6 aluminium. The skid plate helps to prevent the rear of the chassis from excessive wear and it comes black anodised for looks and greater surface protection. Xtreme Racing recommend to use 3mm longer fasteners for better support of the plate, chassis and gearbox.

Source: Xtreme Racing [xtremeracing.com]

July 30, 2019

Bezerk MBX8 carbon fibre shock towers

Available now from Bezerk are carbon fibre front and rear shock towers for the Mugen MBX8 1/8th scale buggies. The range includes a 5.0mm graphite front shock tower as well as standard and high wing rear variants – the latter offering additional mounting positions for the rear wing with the high wing position improving overall downforce and balance. The rear shock towers are available in 4.0mm and 5.0mm thick variants and all three match the standard kit suspension geometry.

View the rear shock towers here

July 24, 2019

MSE MRX6R lower aluminium shock mount

Mugen Seiki Europe have announced the release of an aluminium lower shock mount for the MRX6R on-road kit. Made of high-quality 7075 aluminium and coming black anodised for wear and looks, the part was developed to replace the standard carbon fibre item. In the event of a crash, the alloy will just deform instead of break, as the carbon fibre parts can on hard impacts, allowing the driver to still finish the race. The shock mount is made in Germany and it is available separately, fitting the left and right hand side of the car.

Source: Mugen Seiki [mugen.eu]