Red RC » Pro Line

November 21, 2012

Pro-Line Big Blox 1/8th buggy tire

Pro-Line have announced their new Big Blox 1/8th buggy tire. Customers and Racers continue to demand higher and higher performance out of 1:8 Buggy Race tires while also requiring tires that last longer and longer. Large center lugs formed into a grid pattern provide the base for the long wear characteristics and unmatched mechanical grip found by all test drivers. The Big Blox tire also features Bow-Tie shaped lugs that scoop the Earth and propel your buggy to the top step of the podium. Great care was taken in detailing the side tread to achieve the same smooth side bite and steering feel found in Pro-Line’s highly successful Blockade Race Tire. The Large Lugs on the Big Blox allow racers to choose softer compounds than previously possible while still lasting through long A-Mains.

Source: Pro-Line [prolineracing.com]

October 21, 2012

Pro-Line MX Blue Groove updates

Pro-Line have just released a whole load of their tires in the MX Blue groove compound. Getting the MX treatment are the Scrubs T 2.2″ MX, Suburbs T 2.2″ both for 1/10th truck, Blockade for 1/8th buggy and Suburbs 2.0 2.2″ RR, Scrubs 2.2″ 2wd FR & Scrubs 2.2″ 4wd FR for 1/10th buggy. Blockade VTR 4.0″ for truggy are now available in M3 Soft pre-mounted on Zero offset VTR wheels, while the ION 1/8th buggy tire will now be available in M3 Soft and M4 Super Soft.

Source: Pro-Line [prolineracing.com]

October 20, 2012

Pro-Line BullDog body for B44.2 buggy

Pro-Line have released this BullDog body for the Team Associated B44.2 buggy. The new B44.2 features a longer and narrower chassis, which requires an all new body. Ryan Cavalieri is coming off an incredible season winning the 2012 ROAR National Championships in both 4wd and 2wd buggy running Pro-Line’s highly coveted line of BullDog Bodies. Ryan has improved upon the design and developed the most advanced body yet, the 2012 BullDog body. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency.

View another image of the body here

September 19, 2012

Pro-Line Ion 1/8th buggy tire

The Pro-Line Ion 1/8th buggy indoor clay tire was designed from the ground-up and requires zero break-in tine. The unique molecular structure tread design provides forward and side traction and with the super-low tread height, maximum wear is reached by the alternating dual center lugs. The ION is also extremely easy to drive due to the super-smooth side tread that flows organically out of the tire sidewall. The new tire already proved its performance by taking the ROAR National Championship in Electric 1/8th buggy in the hands of Ty Tessmann.

Source: Pro-Line [prolineracing.com]

August 16, 2012

Pro-Line Tazer RR & Hole Shot FR 1/10th tire

Pro-Line have released the Tazer for 1/10th buggy a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads that will last throughout the long A-mains and perfectly sized lugs that will propel you to the top of the podium. Available for the rear they come in M3 and M4 compounds. Also new is the Hole Shot 1/10th 2wd front tire in M3 and M4 compounds. If you race your buggy outdoors, then you need the new Hole Shot. Unlike the typical ribbed front tire, these 2WD fronts are super smooth while still maintaining all the steering you need. Ribbed fronts are known for doing the catch-and-grab at the wrong time leading to inconsistent handling. This thread sets the new standard in steering for every outdoor track condition, from super loose to hard-packed.

View the new Hole Shot FR tire here

August 16, 2012

Pro-Line 2012 Ford Focus ST body & mounts

Pro-Line have released this 2012 Ford Focus ST Body for your Short Course Truck. Pro-Line is innovating once again and bringing new life to your SC truck by transforming your truck into a Rally Car. Rally racing is an extremely popular motorsport around the world and now you can make your truck look just like the real thing. The Ford Focus ST is a highly stylish body that also proved to be extremely competitive on the World Rally stage. PL have also released a range of body mounts for the Slash 4×4, 2wd and the SC10 to allow you to mount bodies such as the new rally shell. The Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time, doing away with the need for body clips.

View more images here

July 20, 2012

Pro-Line Blockade VTR 4.0” tires

More new items from Pro-Line with the release of these Blockade VTR 4.0” tires. History was made the first time the Blockade touched the race track, winning the 2012 ROAR Fuel Off-Road Nationals in the hands of Pro-Line driver Ty Tessmann. The revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires. This tire will give your Truggy qualifying speed with tread life capable of handling hour long A-main events.

Source: Pro-Line [prolineracing.com]

July 20, 2012

Pro-Line BullDog Body for TLR22T

Pro-Line have released the BullDog Body for the TLR22T racing truck. Pro-Line took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have 22T body for the new racing season.

View another image of the body here