Coming soon from KO Propo is the Servo Model Selector, a device that allows to store up to five different model pre-set memories in compatible servos. The model selector is usable with RSx, RSx2 and BSx2 servos and it requires the use of KO Propo’s ICS Servo Manager software for an initial setup of the values with the actual pre-sets being easily accessible by just using the Servo Model Selector.
Coming from Xray and made for the NT1 1/10th 200mm nitro on-road car is a rear graphite chassis stiffener. Designed to eliminate flex around the engine area the brace comes in handy especially on high-bite tracks as it couples the radio plate mount and the 2-speed bulkhead, resulting in a reinforced rear chassis section. Included with the stiffener comes suitable mounting hardware.
Source: Xray [teamxray.com]
Brilliant RC have introduced their new C-18 R 1/8th scale on-road bodyshell. Available in a standard non-cut but also pre-cut variants for vehicles such as the Shepherd Velox V8, Mugen MRX-6, Serpent 977, Xray RX8 and ARC R8.0, the body is manufactured in Germany from finest 0.75mm polycarbonate with well distributed material thickness making for best durability and performance. The body’s shape ensures a very good overall traction in combination with a lot of steering, resulting in a super smooth but fast handling. Coming with window masking sheet and decals, the EFRA homologated body (#31545) will also be legal for the Pro Stock Series and it is available very soon.
T-Works have introduced their new tyre additive bottle with heavy duty applicator. The sponge applicator will withstand even highly aggressive traction sauces such as the Mighty Gripper V3 with the 50ml bottles being ideal to mix own additives or to control the amount of sauce taken with you during travelling. Included with the bottle comes a range of coloured dots to allow for easy marking.
Coming soon from Trinity is the 24K Certified Plus stock racing brushless motor. Based on the standard 24K the Certified Plus went through specific checks to ensure maximum performance. First up the motor’s rotor asymmetry is being checked which is meant to be a crucial part in building a fast motor. Typically a rotor shows asymmetry values of 0 to 30 plus with Trinity’s Certified Plus motors not exceeding a 4. On top of this each motor comes with red-sealed ceramic bearings and pre-set timing specially dedicated for 2-cell off-road, 2-cell on-road touring or 1-cell 1/12th scale applications. The Certified Plus range of motors will include 13.5T and 17.5T variants, they come with dyno printouts and are available soon.
Source: Trinity [teamtrinity.com]
Coming from Fast Race and made for Mugen’s MBX7R buggy are coloured battery boxes. Constructed from ABS material the compartments easily take straight-type LiPo receiver battery packs while an incorporated channel makes for easy wire routing towards the receiver box. The battery box comes in fluorescent yellow or red as well as plain black colour with two screws allowing for easy battery access through the detachable lid.
Schelle’s popular Onyx high-quality ball bearings are now available as a 10 for $10 deal. The greased ABEC3 standard bearings sport combined rubber and metal seals, making them ideal for kits and RTR vehicles as well as both 1/8th and 1/10th scale cars as they have a lower starting torque, making them run with less drag compared to other rubber-sealed bearings. The 10-piece ball race packs are available in a range of popular metric and imperial sizes.
Source: Schelle Racing Innovations [schelleracing.com]
Cox have introduced the a new touring car chassis tool in the form of the carbon fibre tweak rod with bulkhead alignment block. The design revolves around the bulkhead alignment block that allows to build straight and tweak-free bulkhead assemblies, offing a width of 19mm and 22mm, covering most of today’s touring cars. As the for anti-tweak rod, the 15mm high-quality carbon fibre rods, with cut outs for the spur gear and topdeck screw, are coupled using the alignment block and used like a usual anti-tweak tool but the multi-piece design allows for much easier storage and transportation.
