Red RC » Shepherd

June 2, 2016

Shepherd Velox F1 aluminium chassis & pod plate

Shepherd have introduced an aluminium main chassis and lower power pod plate for the Velox F1 formula car. Made from aircraft-grade and black anodised 7075-T6 aluminium these option parts will make for improved on-track performance especially in medium to high-grip conditions. For optimised flex characteristics the 2mm chassis sports four cut-out openings in the battery area while the silver chamfered edges improved visual impact. Both the chassis and the lower pod plate are available now.

View more images here

April 7, 2016

Kai-Oliver Guttschau teams up with Shepherd

Shepherd have announced the signing of former Tamiya European and Vice-World Champion, Kai-Oliver Guttschau to their team. After taking a break from the hobby for a couple of years, Kai-O jumped back into action at the Mülheim-Kährlich round of the ETS where Shepherd showed the first pre-production prototypes of the Velox F1. The forthcoming round of the ETS in Austria will be Kai-O’s first official race with the Velox F1 and additionally the former 1/10th Nitro German Vice-Champion plans to pilot Shepherd’s Velox V10 200mm car at selected events. Kai-O had the following to say about the deal:

Finally we came together and I’m sure that the cooperation with the guys from Team Shepherd will be outstanding. The quality and the performance of the Velox F1 is very impressive and I’m looking forward to attend some exciting races.

Source: Shepherd [team-shepherd.com]

March 24, 2016

Shepherd Velox F1 1/10th formula car kit

Following a first teaser some time ago German company Shepherd now have officially introduced their all-new 1/10th Velox F1 formula car kit. After a long and intensive development phase and already successful in pre-production prototype stages, the kit was developed from scratch in close cooperation with some experienced formula drivers. Sporting a clean and symmetrical design the chassis features a single centre post for fixing the centre shock and the body mount plate which results in a lot of space for the electronics. A Shepherd VRS absorber with a floating piston instead of a membrane and two high quality aluminium tube dampers take care of the damping duties to keep the wheels on the ground and to guarantee maximum traction under all track conditions.

Continue reading here

November 26, 2015

Project RC 0.8 pitch on-road gearbox

Following a long and meticulous development period Project RC have now introduced their all-new 0.8 pitch 2-speed on-road gearbox. Using the gearbox, that had a successful outing during the recent IFMAR 1/8th World in Brazil, will increase acceleration and top speed thanks to their low rotation mass, optimised gear mesh and high efficiency. The conversion includes everything needed and it is available for both the Shepherd Velox V8 and the Mugen MRX5.

Source: Project [projectrc.net]

November 12, 2015

Shepherd Velox F1 1/10th formula pan car

Another company to join the 1/10th Formula game is Shepherd Micro Racing who have released first images of their forthcoming Velox F1 formula pan car. Designed from scratch and developed in close cooperation with experienced formula drivers the var is a combination of well-proven features and new innovations. Two hard-coated tube dampers and a VRS absorber with a floating piston instead of a membrane take care of the damping duties and the carbon fibre chassis is designed for the use of a standard or LCG 2s shorty LiPo which can be installed in a front or rear transversal position to fine-tune the weight balance. To adjust the caster, different moulded inserts are used while it is possible to adjust the camber with using L/R thread turnbuckles. Furthermore the rear power pod is equipped with an externally adjustable 18-ball differential. The rear ride height can be adjusted with shims and the eccentric inserts allow a short and a long wheelbase setup. Included in the kit will be adjustable ETS-legal front and rear wings as well as a lexan body and the release is planned for early 2016.

View more photos here

November 10, 2015

Shepherd Velox V8 chrome-style alloy clutch bell

New from Shepherd and made for the Velox V8 is the chrome-style aluminium clutch bell. Made from high-quality 7075-T6 aluminium with a special “chrome-style” treatment the bell fits the standard type as well as the reverse type clutches. With a weight of just 4 grams the weight saving is about 60 percent compared to the standard steel clutch bell. For perfect performance Shepherd recommens to use the aluminium clutch bell in combination with the yellow tuning clutch shoe and the light flyweights.

Source: Shepherd [team-shepherd.com]

September 16, 2015

Brilliant RC 6S LiPo battery pack

Brilliant RC have introduced their high quality competition battery especially designed for 1/8th on-road cars. As the huge weight of the battery should be placed in the centre of the car for a balanced handling, various 1/8th electric on-road cars need a special battery configuration. Developed with a leading battery manufacturer Brilliant RC now offers a suitable battery pack with a size of 93x70x42mm that can be used in the Shepherd Velox E8, Capricorn Lab E 801 as well as aftermarket upgrade kits for Serpent and Mugen. To maximise the power output the battery comes equipped with 5.5mm gold-plated connectors. With a capacity of 4450mAh the battery offers maximum runtime while still being below the crucial 100Wh shipping limit.

Source: Brilliant RC [brilliant-rc.com]

August 27, 2015

Shepherd Velox Revolutionary Shocks upgrade parts

Shepherd have new upgrade parts for their Revolutionary shock absorbers available. First up is the shock revision set that will keep the dampers in perfect condition. New piston rod O-rings guarantee a smooth operation of the piston rod while the black O-rings ensure a precise guidance of the floating piston. With the included balljoints and shock caps slop can be reduced for a much more precise operation of the shocks. Also new are updated shock bottom caps that allow an easier escape of air bubbles when tightening them down. Thanks to a much larger bleeding slot a simpler and faster filling of the shocks is possible and the screws are also included in the Velox kits from now.

Click here to view the lower shock caps