Red RC » STRC

January 6, 2022

STRC Drag Slash HD rear tower

STRC have introduced their new CNC machined aluminium heavy duty rear shock tower for the popular Traxxas Drag Slash. This HD shock tower anchors the rear of the Drag Slash by improving the strength of the rear upper shock mounting points and eliminating unwanted flex found in the stock plastic shock tower. Offering optional upper shock mounting locations, it also increases the weight in the rear for improved traction and adds great looks to your Drag Slash. Available now in anodised blue, gun metal, green, red and silver.

Source: STRC [teamstrc.com]

November 22, 2021

STRC Drag Slash front & rear aluminium A-arms

STRC have introduced their new CNC machined aluminium front and rear A-arm kits for the Traxxas Drag Slash. Improve the front end durability and add a bit more weight to the front end of your Drag Slash with these front A-arms which match precisely the stock suspension geometry and which include their heat-treated steel lock-nut style hinge-pin kits so you never have an issue with the hinge-pins backing out. The rear A-arm reduces the rear toe-in on the Drag Slash from the stock 3 degrees to just 1 degree, which will improve straight line top speed. These arms also include the heat-treated steel lock-nut style hinge-pin kits as well. Available now in anodised blue, gun metal, green, red and silver.

View more images of the A-arms here

September 20, 2021

STRC Drag Slash aluminium options

Introducing ST Racing Concepts’ new line of option parts for the Traxxas Drag Slash. CNC machined aluminium front bumper improves durability of your Drag Slash and adds a bit of weight to the front of the vehicle to help prevent the front end from lifting during hard acceleration. The aluminium front caster blocks improve durability and add a great look to the Drag Slash, while the aluminium rear motor guard/Wheelie bar mount provides a solid mounting point for the rear wheelie bar and takes away any unwanted flex. Finally, the aluminium heat-sink finned motor plate improves heat dissipation of the motor and adds that factory look to your Drag Slash. All option parts are CNC machined from high quality aluminium and available in anodised blue, green, gun metal, red and silver.

View the other new items here

August 6, 2021

STRC 0° & 1° toe-in rear suspension block combo set

STRC’s new CNC machined aluminium 0° & 1° toe-in rear suspension block combo set for the Associated DR10 dragster allow racers to fine tune the amount of rear toe-in to find the ultimate balance between straight-line top speed and rear traction. These suspension blocks are machined from high quality aluminium and features machined Delrin pivot ball for the hinge-pins for the smoothest suspension movement while preventing wear to the suspension blocks. Available in anodised black, gun metal, blue and orange.

Source: STRC [teamstrc.com]

July 22, 2021

STRC DR10 0° toe-in rear hub carriers

These new CNC machined aluminium 0° toe-in rear hub carriers from STRC are designed for the Associated DR10 dragster. They allow racers to trim-out the rear toe-in for more straight-line top speed. Machined from high quality aluminium, the bearing holes on these hubs are drilled post-anodising to ensure the best possible fit of the hub bearings. Available in anodised black, gun metal, blue and orange.

Source: STRC [teamstrc.com]

January 14, 2021

STRC DR10 aluminium suspension parts

From STRC comes these aluminium suspension option parts for the popular Associated DR10. CNC machined front suspension components like steering knuckles and caster blocks brings precision to the front suspension, adds great looks and a bit more weight to the front of your DR10 dragster. Bearing holes for the front steering knuckles are drilled after anodising to preserve the best tolerance. The one degree toe-in rear hub carriers can help with your DR10 dragster track straight and improve rear traction especially under low traction conditions, and just like the front steering knuckles the bearing holes are drilled after anodising to preserve the best tolerance. Available in anodised black, blue, gun metal, limited edition orange.

View the other parts here

December 13, 2020

STRC DR10 aluminium option parts

Introducing ST Racing Concepts’ first wave of aluminium option parts for the popular Associated DR10. Starting with their CNC Machined aluminium wheelie bar mount which works with their aluminium wheelie bar kit for the DR10 or the stock wheelie bar, offering a solid mounting point for the wheelie bar during hard acceleration when launching off the line. The wheelie bar mount also features adjustment holes to provide different angles. The front hinge-pin brace keeps the front suspension arms solid in place in an event of a crash while adding a bit more weight to the front of the DR10. The servo mounts add factory great looks, a bit more weight to the front of the car and eliminate any unwanted flex of the stock plastic mounts to keep the DR10 steering precise and tracking straight. All parts are available in anodised black, blue, gun metal and limited edition orange.

View the other parts here

November 9, 2020

STRC Limitless rear wing support & bellcrank plate

ST Racing Concepts have produced two new items for the Arrma Limitless with their new graphite high-downforce rear wing support and graphite steering bellcrank plate. The high-quality rear wing support with its CNC machined aluminium cross member provides the ultimate aero dynamic package for the rear wing of your Limitless. This package will drastically reduce any vibration and flex of the rear wing and support the wing for maximum rear traction during those insane high-speed runs. Available in red, gun metal and silver. The graphite steering bellcrank upper plate for the Outcast and Infraction/Limitless tightens up the precision of the steering bellcrank system and adds great factory looks to your Arrma vehicle.

View the bellcrank upper plate here