Red RC » Team Losi

April 21, 2016

Schelle B5M & TLR 22 3.0 vented motor plates

Coming from Schelle Racing Innovations are lightweight vented motor plates for the Team Associated B5M and the TLR 22 3.0. Cut from high-quality aluminium and coming in an anodised finish the motor plates offer minimised weight, increased airflow, and maximised rigidity. The unique vent slits are machined partial depth on the back side of the motor plate to create two tiny slits in the plate. These slits will keep air flowing through, and everything else outside and the plates are fully machined to keep them from warping under extreme stress and heat and they weight in at only 12.95g for the B5M and 13.8g for the TLR plate. They are available as B5M 3 or 4-gear variant in black or blue colour and as black or hard anodised finish version for the 3-gear TLR 22 3.0.

View more images here

April 20, 2016

JConcepts TLR 22 3.0 titanium front axle

JConcepts have introduced a titanium front axle set for the TLR 22 3.0 2WD off-road buggy. Designed especially for the 3.0 the user-friendly and lightweight axles are of a single piece design, allowing the use of a traditional 4mm lock-nut instead of the stock screw type design originally used on the 22 platform. Titanium material lowers the weight, increases strength over aluminium and increases the bling factor by 10-fold. This design can easily be installed on the 22 3.0 buggy by using the existing hardware from the TLR kit.

Source: JConcepts [jconcept.net]

April 19, 2016

JConcepts 8ight 4.0 Fin titanium turnbuckle set

JConcepts have introduced the Fin titanium turnbuckle set for the TLR 8ight 4.0 nitro off-road buggy. The base of the six main suspension turnbuckles centers around a beefy 5mm square titanium base. The light-weight yet durable material is gradually machined down and tapers into a thread base design which accepts the rod ends featured in the kit. The unique JC set also features two additional turnbuckles, one for the throttle and one for the steering linkage.

Source: JConcepts [jconcepts.net]

April 19, 2016

TLR 22 3.0 ultra light bodyshell

Horizon Hobby have introduced an ultra light bodyshell for the TLR 22 3.0 2WD buggy. Moulded from thinner polycarbonate material than the standard kit item the body is meant to scrub a good amount of weight for improved performance especially in Stock classes while the overall lower centre of gravity can also be beneficial when running on high-bite surfaces. Included in the set are the pre-cut body and rear wing, an add-on rear fin as well as mounting hardware, pre-cut window masks and a decal sheet.

Source: TLR [tlracing.com]

April 7, 2016

Exotek 22 3.0 laydown gearbox conversion

Available for pre-order now is Exotek’s laydown gearbox conversion for the TLR 22 3.0 buggy. The machined alloy 3 gear box makes for precise running gears, it is light of weight yet strong enough to stiffen up the chassis and rear tower for improved consistency on high-grip tracks. The low centre of gravity arrangement also makes all gears running in a straight line for a smoother running idler gear while the alloy material reduces motor temperatures as it acts as a heatsink. Also incorporated into the design is a slightly raised gear diff position which helps when running lower ride heights. The set will include a black anodised aluminium gearbox, an alloy lightweight motor plate, delrin gear cover, a hinged, lightweight carbon fibre battery mount as well as alloy waterfall spacers, a chassis drill template, hardware and full instructions. Targeting experienced modellers the set will become available around mid-April.

Source: Exotek [exotekracing.com]

April 7, 2016

Losi 1/5 Monster Truck XL 4WD RTR

Horizon Hobby have introduced the Losi 1/5 Monster Truck XL 4WD RTR large scale truck. A massive 90cm long and 60cm wide, the truck is powered by a 29cc gasoline engine that is capable of propelling the vehicle to a speed of up to 45km/h. To help manage its insane power, the Monster Truck XL comes equipped with AVC vehicle control technology and two authoritative large-scale steering servos. Other features include aluminium front spindles, heavy-duty monster truck tyres, and viscous torque differentials that consistently deliver maximum power. Also included in the set is a genuine Spektrum DX2E transmitter and the truck is available in two bodyshell colours.

Continue reading here

March 25, 2016

Vision Racing TLR 8ight carbon fibre steering link

Vision Racing have introduced the “2.5mm long” carbon fibre steering link for the TLR 8ight line of 1/8th scale vehicles. The lightweight part comes cut from high-quality carbon fibre, it features installed ball bearings and fits the current 8ight 4.0, 8ight-E 4.0, and 8ight-T 4.0 as well as all previous 8ight series vehicles.

Source: Vision Racing [vision-racing.net]

March 24, 2016

JConcepts Aero lower front wing

JConcepts Aero lower front wing set

New from JConcepts comes the Aero lower from wing for 1/10th 2WD buggies such as the Team Associated B5M and TLR 22 3.0. The lower front wing mounts in a more forward position and is quite easy to trim, use and test without sacrificing all important track time. The front wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. The lower front wing comes in 2-piece sets, is not car specific and can be used on most all 1/10th off-road buggies. Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection moulded part, the 3D print item should give ample support to drivers wanting to utilise the JConcepts designed parts for a completely matched setup as used by the factory race team.

View more images here