Red RC » Team Losi

November 10, 2015

DE Racing SpeedLine Plus 2.4 4WD front wheels

DE Racing has added 2.4″ 4WD buggy front wheels to their SpeedLine Plus 2.4 range of 1/10th buggy wheels. They feature a 12mm hex and offset for use on many models including the Kyosho ZX-6, TLR 22-4, Hot Bodies D413, and Team Associated B44.3 when using their 12mm hex conversion. The wheels are manufactured in the USA and available in eight colours including black, blue, green, orange, pink, red, white and yellow.

View the other available colours here

November 5, 2015

TLR22 3.0 mid motor 2WD buggy kit

With the TLR 22 3.0 Team Losi Racing have introduced the latest incarnation of the popular 22 1/10th 2WD buggy. The 3.0 has been designed to give racers a versatile platform that easily adapts to changing track conditions without requiring a lot tuning changes. First up is the all-new 3-gear transmission with revised motor location that places the motor 12mm closer to the diff gear to increases the rear weight bias, providing better rear grip on exit, more entry steering and a buggy that, overall, is easier to drive. The new layout also decreases chassis roll, greatly improving the vehicle’s stability, consistency and braking. A 4-gear transmission is available separately for lower-grip tracks and different driving styles.

Continue reading here

October 26, 2015

MIP TLR 22T 2.0 17.5T Pucks drive system

MIP have introduced the 17.5T Pucks drive system for the TLR 22T 2.0 race truck. The aluminium based drivetrain system which aluminium diff outdrives, aluminium C-CVD bones, and replaceable plastic orange wear pucks that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by around 50 percent The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps especially in stock racing classes.

Source: MIP [miponline.com]

October 22, 2015

Losi Night Crawler 2.0 RTR rock crawler

Losi have introduced the Night Crawler 2.0 ready-to-run rock crawler. Utilising an aluminium twin vertical plate chassis design the vehicle also features heavy duty front and rear worm-gear drives, a zero Ackermann steering, moulded 4-link suspension, 4″ adjustable aluminium shocks and a LiPo-ready crawler-programmed speed controller. Also included is a 35T Dynamite crawler motor and a high-torque steering servo. The set is rounded out by a full range Spektrum SR310 receiver, beadlock wheels with red chrome rings and grippy crawler tyres as well as rock lights and an LED light bar.

View the features and more photos here

October 16, 2015

TLR SCTE 2.0 dogbone centre driveline set

Coming from TLR and made for the SCTE 2.0 4WD short course truck is the dogbone centre driveline set. The front- and rear center dogbones eliminate the friction of a CV coupler and reduce the bind caused after the front centre CV coupler wears. The set utilises shorter and lighter front and rear outdrives in the centre for faster acceleration and longer diff life with today’s power systems while also offering increased longevity due to bone float. The set is designed to fit the standard and -3mm chassis.

Source: TLR [tlracing.com]

October 16, 2015

Exotek Exo22T mid motor chassis set

Exotek have introduced the Exo22T mid motor chassis conversion kit for the TLR 22T and mid motor converted 22T 2.0 stadium trucks. With its simple and efficient layout, the Exo22T offers improved rearward weight positioning of the battery and electronics to better suit a variety of track conditions. The chassis allows standard inline shorty battery positioning or the easy to drive side ways mounted shorty battery installation. Included in the set is a black anodised 2.5mm 7075 alloy chassis with 5mm carbon side rails for proper stiffness and strength. Pocket milling in the chassis lowers the battery and speed controller for a lower overall centre of gravity while the included carbon LiPo strap also acts as a top plate. The LiPo strap is fastened to the rear alloy brace and two alloys posts and part of the package is also a machined 7075 alloy nose plate that is used for durability while allowing for inexpensive chassis swaps.

View the features and more photos here

October 1, 2015

Vision Racing 1/10th buggy carbon fibre wing brace

Coming from Vision Racing and made for a range of 1/10th buggies is a carbon fibre wing brace. Cut from 2mm carbon fibre and usable with the TLR 22 platforms, the 22-4, Team Associated B5, B44 and B4, the brace will add rigidity to the wing mounting area as well as a little bling.

View the part in place here

September 17, 2015

Glenn Smith teams up with TLR

Horizon Hobby UK welcome Glenn Smith as the newest edition to the TLR UK team. Recent results have seen a real turn of speed from Glenn and his sponsors now hope to see him further his development with the support and experience of his new team mates.

Source: Horizon Hobby [horizonhobby.co.uk]