Red RC » Team Losi

July 24, 2015

Pro-Line LockDown 1/5th scale tyre

New from Pro-Line comes the LockDown XTR tyre for large scale models such as the Losi 5ive-T. Just like the 1/8th buggy race tyre, the LockDown has a more open tread pattern than the Blockade making it perfect for loose conditions. The tyre also features connected side tread technology that reduces the edginess of the truck to prevent catching a rut and flipping. The inside contains detailed webbing that strengthens the tire carcass and prevents excessive tire expansion. The tyre is moulded from durable XTR rubber and it works with HPI 5T rear and Losi 5ive-T front or rear foams.

Source: Pro-Line [prolineracing.com]

July 18, 2015

TLR 22-4 12.5 degree C-hubs & front belt cover set +

TLR 22-4 12.5° C-hubs & front belt cover set +

Team Losi Racing have two new option parts for the 22-4 1/10th 4WD buggy available in the form of an “in-between” C-hub set and the front belt cover set +. Starting with the C-hubs, the parts are designed with 12.5 degree built-in caster to add to the already existing 10 degree and 15 degree parts. The hubs are machined from 6061-T6 aluminium, they come grey anodised and are laser-etched for easy identification.

Click here to continue reading

July 11, 2015

MIP AE & TLR .250 bore machined T-nut

MIP .250 bore machined T-nut

Made for 5th and 4th generation Team Associated 1/10th vehicles as well as AE and TLR MIP ball differentials is a machined T-nut from MIP. The 7075-T6 machined aluminium T-nut is completely rebuildable by simply replacing the small nylon inserts. These high quality nylon inserts increase the screws break away force by 20 percent, meaning that the diff screw will stay in its desired position much longer and increase the consistency of the differential over time. The aluminium design also increases sheer strength of the “T” by 40 percent. Included in the set are the aluminium T-nut and two nylon inserts.

Source: MIP [miponline.com]

July 9, 2015

TLR 8ight-T E 3.0 electric truggy kit

Horizon Hobby have introduced the Team Losi Racing 8ight-T E 3.0 1/8th scale electric truggy kit. The latest incarnation of TLR’s popular 8ight-T platform features an all-new chassis that has been widened and balanced specifically for electric power. It is milled from lightweight, 4mm 7075-T6 aluminium and has been hard anodised for maximum durability. The chassis gives racers multiple ESC and battery mounting locations which makes it possible to easily relocate components when tuning the vehicle’s balance for varying track conditions. Specific suspension components such as springs, shock pistons and sway bars have also been updated to better complement electric power systems. Included in the 3.0 kit are also new CNC-machined aluminium shock towers, tapered shock springs for improved clearance and less chances of spring cup ejection during extreme impacts. The kit is rounded out by a special electric version bodyshell which shares many of the same lines with the nitro version body but extends the rear stabilisation fin so that it meets the rear of the cab. The adjustable rear wing includes a .250 and .500 inch spacer that let the wing move back for extra stability on high-speed tracks.

Click here to view the features and more photos

July 2, 2015

Losi LST XXL-2 1/8th brushless monster truck

Horizon Hobby have introduced the LST XXL-2 1/8th scale electric brushless monster truck. Sitting on a highly durable 2.5mm aluminium chassis the truck packs ferocious features into a sturdy build that can hold up to abuse and unforgiving driving conditions. Equipped with a 6S compatible Dynamite speed controller and AVC technology the vehicle targets experienced drivers and beginners alike. A 2200kv brushless motor makes for speeds of over 90km/h while the sturdy 4WD drivetrain with sealed gear differentials can take lots of abuse. Included with the factory-built vehicle comes a genuine Spektrum DX2E 2.4GHz radio system and a newly design bodyshell along a set of multi-surface tyres.

Click here to view the features and more photos

July 1, 2015

New option parts for the TLR 22-4

TLR 22-4 Option parts

TLR have announced 3 new option parts for their 4wd electric buggy, the 22-4. First off, the vertical ball stud mount using standard ball studs, and not washers, is 1mm lower than the stock 3/4/5 holes which the team has found to make the car rotate quicker without sliding. This new part is used on many key TLR 22-4 setups including Ryan Maifield’s 2015 Reedy Race Champion setup. Next is a steel version of the Front Pivot Brace that is superbly durable and over the last several months none of their team drivers has suffered a failure on this part. Finally the TLR race team had found they can easily run the side belt using the loosest (#1) tensioners, and an even looser option was needed for SPEC racing. After lots of testing, they found the ‘0’ side belt inserts to work well for most mod and spec racers in their 22-4s.

View the other new parts here

June 25, 2015

Pro-Line 1/8th & 1/10th bodyshell news

Pro-Line have three new bodyshells for 1/8th and 1/10th buggies available. First up is the Type-R for the Kyosho MP9 TKI3. Coming from the mind of Ty Tessmann and first available for the HB D815 the body offers a mid-cab design and undercut side pods for a unique look. The body fits perfectly around the TKI3 buggy parts and features kick up in the rear of the body for balanced front to rear down force. It comes completely cut out, including the engine and fuel openings to get you onto the track faster with less hassle.

Click here to continue reading

June 4, 2015

Losi 1/14th Mini 8ight RTR AVC buggy

Losi’s 1/14th scale Mini 8ight RTR buggy is now also available with Active Vehicle Control technology. Based on the design of the ROAR National Championship winning 8ight buggy the condensed Mini 8ight offers a 2.5mm hard anodised aluminium chassis, sturdy suspension components, oil-filled aluminium shock absorbers as well as front and rear metal gear differentials. The factory-installed 4500kv brushless motor and LiPo-compatible Dynamite speed controller give plenty of speed while the new AVC system helps to keep the buggy under control even in the most severe situations. The buggy is available in two different designs and the package is rounded out by a genuine Spektrum DX2E radio system, a 6-cell NiMH battery and a suitable wall charger.

Click here to view the features and more photos