Red RC » Team Losi

March 12, 2021

MOD 22 2wd one-piece steel pin drive outdrives

From Matt Olson’s MOD brand for the 22 2wd series is these machined feather weight one piece steel pin drive outdrives. Manufactured in the USA by MIP it shaves 5.7 grams of rotational mass compared to the stock part. That 26% rotational mass will substantially increase your bottom end punch, lower motor temps and improve braking power. These outdrives are compatible with any size motor on the market and built for any application but it is in stock, superstock and drag customers that will see the biggest advantages these outdrives will provide. The kit comes with everything needed to build up a full diff with the exception of the stock gear which you can rob from your current diff.

Source: MOD [modspeedshop.com]

March 11, 2021

Exotek Racing TLR22 based street eliminator options

More new items from Exotek Racing for TLR22 based street eliminator cars. Firstly there are these precision machined titanium 12mm wide front hex axle set for +6mm overall wider width for more stability and less body roll. At only 4.5 grams per pair they are almost as strong as steel but nearly half the weight and not easily bent as the aluminium axles. Rounded and angled hex profile makes wheel installation extra quick and easy. Also for the same car but the rear, these wide clamping heavy duty hex sets (8mm each) allows easy mounting, without spacers, of Proline and JConcepts street eliminator wheels.

View the hex sets here

February 25, 2021

Losi 69 Camaro 22S No Prep drag car

With the popularity of No Prep Drag Racing exploding, Losi has introduced this ready to run 1969 Camaro drag car. Carefully crafted to give a classic look while still fitting into the rules and regulations set by the No-Prep Drag Racing scene, it has all the advantages of an aluminium chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It’s designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low centre of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability along with a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC and Spektrum Firma 6500kv brushless motor.

View more images of the Camara here

February 24, 2021

1up Racing TLR22 perfect centre camber link mounts

New for the TLR22 5.0 Elite and 22X-4 buggies from 1up Racing are these perfect centre outer rear camber link mounts. These new camber link mounts place the ball stud directly over the rear drive axle which allows the vehicle to roll more naturally. These allow you to enter corners with greater speed and exit corners on power sooner, capable of shaving tenths off your lap times. CNC machined in the USA from high-quality aluminium they will hold up to any tests thrown their way.

View the camber link mounts here

February 15, 2021

PSM TLR22 5.0 SC1 slipper pads

PSM have produced this carbon SC1 slipper pad for the TLR22 5.0 buggy. Featuring their high performance carbon composite material, these slipper pads have been developed to provide fade resistance and linear performance. Tested through multiple 15 minute long runs and proven by racing competitions, the slot cooled (SC) design provides a stable temperature level along with smooth and consistent acceleration. Sold as a pair.

Source: PSM [psmfactory.com]

February 12, 2021

JConcepts Mini-T 2.0 Carver & Sprinter tires

JConcepts introduce a number of new items for the Losi Mini-T 2.0 & Mini-B starting with their new Carver front tire. Perfect for a variety of track surfaces. The sharp angular and directional ribs provide the ultimate in control and direction on the most common dry and wet condition surfaces. The compact tire body combined with the JConcepts firm foam inserts allow for precise steering input and response for the most consistent laps times available. Available unmounted and pre-mounted they come in ‘sticky green’ dirt compound and ‘pink’ carpet compound.

View details on the new Sprinter tires & mono wheels here

February 10, 2021

Avid 22X-4 chassis brace support tuning set

Avid have announced the release of this chassis brace support tuning set for the TLR 22X-4. Designed to make the TLR 22X-4 steering more predictable to drive while providing more confidence, it does so by stiffening the front end with a thick 3.5mm carbon brace and softening the rear with a 1.5mm carbon brace. The set comes with a pair of 1.0mm shims to maintain rear chassis and gearbox gap.

Source: Avid [avidrc.com]

January 19, 2021

Avid TLR 22X-4 carbon shock towers

Avid have released these carbon shock towers for the TLR 22X-4, available individually or together as a set. The front and rear shock tower are made from 100% carbon fibre, and feature an added upper camber link, lightly chamfered edges to maintain that TLR factory look, and to help prevent splitting, and the Avid logo machined into the upper support arm.

Source: Avid [avidrc.com]