October 23, 2007

Xray M18T & M18MT Ready-to-run

Xray release M18T & M18MT RTR

Xray have announced the release of 2 new ready to run kits featuring their successful M18T micro truck and M18MT micro monster truck, both of which will be supplied with the all new Xray radio system and power pack. Assembled in the European Xray factory, the RTR package includes everything you need to get your M18T/M18MT on track in a matter or minutes. The fully assembled, and electronics equipped, truck/monster truck comes with pre-painted, trimmed and decaled body which is available in red, blue, green or orange while the radio system is available on world friendly frequencies.

Click here for more information… content


October 17, 2007

Xray LE Alu Touring Set-Up Board

Xray LE Alu Touring Set-Up Board

Xray have announced that they have begun selling this limited edition setup board for 1/10th scale touring cars, the same as those given to Xray racers at the European Championships in Madrid. In addition to the ultra flat, high quality board, you can now also have your name printed on the set-up board with your country flag or your team name. For a nominal surcharge Xray will print your name on the board, so that you have your unique personalized set-up board to bring to the track.

Source: Xray [teamxray.com]


October 16, 2007

KM Racing NT1 anti-roll bars

 KM Racing NT1 anti-roll bars

KM Racing continue to release parts for the Xray NT1 with the introduction of a complete set of rear anti-roll bars for the car. Available in a number of different thicknesses to help set-up your car, they come in 1.7mm, 1.8mm, 1.9mm, 2.1mm, 2.2mm & 2.3mm and are a direct replacement for the original parts.

Click here to see the part mounted… content


October 11, 2007

Martin Lissau wins 2007 Danish Nats

 Martin Lissau wins 2007 Danish Nats

Xray have a report from their team driver Martin Lissau on the 5th and last race of the Danish 1/10 nitro touring car championship was held in Naestved RC Model Center. “I had to finish in the top 7 to be the National champion. It was hard because I had no tools and no staff with me as all were prepared for Worlds Championship in 1/5 cars that I have attended the day after the final run. After the qualification I was second, just behind Martin Fish, another XRAY driver. The final was without any stress as Martin got interference problems so he had to retire. Jesper Hoh could take the victory in this final as I made some mistakes. I finished on the second place, Dennis Hassing could take third place”.

Source: Xray [teamxray.com]


October 10, 2007

Leon McIntosh wins the Region 4 Champs

Leon McIntosh wins the Region 4 Champs

Xray are reporting on the Region 4 Championships that took place last weekend Ocala, Florida. Racers from all around the state came together for the championship race on a track that was for the most part very wide open with some tight and technical sections. In the main final it was Kyosho racer Ryan Eckert that got the lead followed by a quick starting Leon McIntosh in 2nd with the Xay XT8. For the first 10 minutes the lead changed back and forth between the 2 until the 12 minute mark when Ryan lost a diff gear giving Leon a comforable lead and eventually the win. Mugen driver Jeff Keaton jumped into 2nd followed by Kyosho Driver Sean Kersten in 3rd.

Source: Xray [teamxray.com]


October 8, 2007

Xray Micro Truck Foam Tires

Xray Micro Truck Foam Tires

Xray have announced the release of new premium-quality, high-density foam tires mounted on strong, rigid 28mm-wide white dish rims. The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter and are designed to fit the M18T or NT18T. Tires are packaged in a sealed air-tight vinyl bag to keep the tires fresh as long as possible. Packaged as 1 pair (2 pieces), the tires are available in 4 popular hardnesses to give you abundant choice for any racing conditions around the world.

Source: Xray [teamxray.com]


October 5, 2007

XRAY Column – Hot Summer Washout

XRAY Column - Hot Summer Washout

The 12th instalment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj talks about this summers busy racing schedule and goes into details about the good, the bad and the unfortunate from each of the major events that they attended.

With great results at the Euros B where Team XRAY won the European Championship title, and also with good performance results at all the national races and the result at the Warm-up, I was very confident for the Euros. The race actually started very well and not only Yannick but also the rest of the team were doing very well. Clearly it was Yannick who was super fast from Day 1 and in the last qualifiers was having a “good battle with Robert Battle” who at the end TQ’d just 0.5 sec in front of Yannick.

Read the full column here.

Source: Xray [teamxray.com]


October 4, 2007

Xray NT1 Foam tires

Xray NT1 Foam tires

Xray have released a range of mounted and trued sedan foam front (27mm) and rear (30mm) tires, developed and designed for high competition nitro racing. The high-grip foam tires have been solidly bonded to Xray’s newly developed Starburst wheels which have been purposefully designed for high-competition racing. Xray used its long-term experiences in composite mixture alchemy to bring forth completely new composite mixtures targeted at nitro touring wheels resulting in super light yet ultra strong and stiff wheels. The tires come packaged in a sealed air-tight vinyl bag, to keep the tires fresh as long as possible, and are available in a wide range of shores.

Source: Xray [teamxray.com]