October 4, 2010

Yokomo BD5 chassis plate & gear diff

Yokomo BD5 chassis plate & gear diff

Seen at the European Championships in France during the summer, Yokomo have finally released the BD5 chassis plate that won the Euros, as well as German and Japanese Nationals in the hands of Ronald Volker. Made from 2.5mm thick carbon fibre it is aimed for use on asphalt and low grip surfaces, giving more flex to help improve overall grip. Also now released from the Japanese company is their gear differential. A direct replacement for the standard ball diff, it gives consistent cornering, no slipping as well as longer times between rebuilds. The diff features lightweight plastic bevel gears which drive the coated aluminium ball cups and the sealed case means you can easily tune to tension with different viscosity oils.

View the gear diff here


September 19, 2010

Spec-R Yokomo 40T gear diff

Spec-R Yokomo 40T gear diff

Spec-R have released the new version of their 40T gear differential for the Yokomo BD5. Made with a lightweight plastic housing, nylon gears, long-life diff joints, it includes the new 0.2mm internal shim and X ring. Benefits of running this type of differential is the reduced maintenance, lack of slipping and that the setting remains unchanged during the race.

View the internal shim here


September 6, 2010

Yokomo YZ-114SPB charger & discharger

Yokomo YZ-114SPB charger & discharger

Yokomo have released the YZ-114SPB, a performance fast charger and discharger. Able to charge the usual range of batteries including LiPo and LiFe, you can monitor the balance of the pack by checking the voltage in each cell through the now built in balancer port. It can be run on DC12V or AC100V, is supplied with all the cables you will need including the temp sensor and comes in the standard silver version of trick looking carbon version.

View the carbon version here


June 25, 2010

Yannic Pruemper joins Yokomo

Yannic Pruemper joins Yokomo

Yokomo have announced that they have signed current European Junior Champion Yannic Pruemper. Just in time for the next week’s World Championship the former Tamiya racer, who won the ETS series race in Poland in 2009, will run the company’s successful BD5 Worlds Spec chassis. Continuing to run Speed Passion products, Yannic joins an already strong team headed by Ronald Volker and since only recently getting the car has been testing intensively ahead of his competition debut with the Japanese manufacturer in Burgdorf. Yannic wished to thank Tamiya for their support over the past number of years and looks forward to a successful partnership with Yokomo.

Source: Yokomo [teamyokomo.com]


May 20, 2010

Yokomo B-Max4 Factory kit

Yokomo B-Max4 Factory Kit

The Yokomo B-Max4 has received the factory treatment, upping performance and beefing up the car against crash damage. Included in this new package is the big bore X shock set, aluminium servo saver mount, aluminium center link, special front brace, aluminium main gear cover, special motor mount, advanced stabilizer set, aluminium rear hub carrier (0 degrees), aluminium shock cap ball, aluminium shock ended ball, carbon battery plate & rear X shock springs (Orange/software). This new version was used successfully to clinch the Japanese Championships although driver of the regular B-Max will need no convincing of it’s fantastic capabilities.

View the full feature list here


April 26, 2010

Roche BD5 titanium coated suspension pins

Roche BD5 titanium coated suspension pins

Roche have released these titanium coated suspension pins for the Yokomo BD5. Made from a hard stainless steel material will provide smoother and lower friction to the arm movement. Each pin will also be engraved to let the user easily identify the length of the pin. Available in 3 versions, there is the 42mm front inner hinge pin, the 45mm rear inner hinge pin and the 45mm outer hinge pin. Available in mid May.

Source: Roche [roche.hk]


April 14, 2010

Roche BD5 Steering brace & Universal wing plates

Roche BD5 Steering brace & Universal wing plates

New from Roche for the Yokomo BD5, is this carbon steering brace. Made from 2.5mm carbon graphite, the steering Brace will give the front end a little more flex than the standard alloy steering brace and this will add a little bit more steering to the car. For all touring cars there is these new carbon wing holder plates. Designed to be used on wing installations for every touring car, it will provide additional support to the wing mount to maintain the structure of the wing in the event of a crash. Both will be available in May.

Click here for more images of the products


March 2, 2010

Yokomo BD5 World Spec

Yokomo BD5 World Spec

The car that has won last weekend’s European Indoor title and the DHI Cup back in January, the BD5 World Spec, is now available from Yokomo. The new World spec car is essentially a LiPo friendly version of the original BD5 with a LiPo only chassis plate that helps optimise the weight balance of all the components. The motor mount has also received some attention and can now more easily cope with a wider range of pinions. The car also comes spec’d with lightweight graphite front & rear suspension arms and front steering & rear hub carriers as well as a super low centre of gravity weight that is place around the front steering assembly.

Click here for more images