Red RC » Yokomo

August 18, 2021

Yokomo YD-2SXIII graphite high traction chassis

For the YD-2SXIII, Yokomo have introduced this new main chassis made of graphite that changes the running characteristics of the machine by drastically changing the shape. Although optimised for the YD-2SXIII, the screw hole positions on the main chassis are the same, so E-series gearboxes and rear motor conversions can also be installed. While using the 2.5 mm thick plate material common to the YD-2 series graphite chassis, it has been slimmed down overall and has been significantly lightened, so it can be used on low grip road surfaces such as P tiles and coloured concrete. In particular, the area around the rear is designed to be as thin as possible by slit processing, making it possible to maximise rear traction. This main chassis has the perfect characteristics when you want to improve the stability of drifting in corners.

View more images of the chassis here

August 5, 2021

Yokomo YZ-2 2wd RTR buggy

Yokomo have released this pre-assembled RTR YZ-2 2wd buggy. This is a ready-to-run version of the same YZ-2 which won the 2017 World Championship, featuring a pre assembled chassis, pre installed electronics, painted body and glued tires. Assembled in Japan, the aluminium main chassis, graphite shock tower, large-capacity shocks, sealed 3-gear transmission, etc. are manufactured with exactly the same specifications as the latest YZ-2. The controller and alignment have also been adjusted, so you can immediately put the car down on the track.

View more images of the YZ-2 here

August 4, 2021

Yokomo YD-2 RWD drift chassis

The YD-2 from Yokomo has undergone a major evolution, with the brand new machine bearing the name of “Z”, which can be said to be the final form. It is equipped with a new 3-split transmission case on the shape-up main chassis and will start as a new standard machine. A new integrated bulkhead is used around the front to improve the left-right balance of the steering and improve operability and the new upper deck is compatible with slide racks as standard in the kit, and steering characteristics suitable for various situations can be obtained with minimal changes. The gear case of the 3-gear transmission has also been newly designed, and the maintainability has been greatly improved by dividing it into three parts. Since you can access the differential simply by removing the cap on the rear side, you can easily handle even ball differentials that are frequently maintained. In addition, the motor position can be selected from 13 stages by rotating the motor mount, making it easy to obtain the balance of the centre of gravity according to the road surface, from low mount to high mount. With 3 gears, the throttle response is outstanding, and combined with the rear traction produced by the supple main chassis, it is a very capable machine.

View more images of the YD-2 here

July 16, 2021

Axon BD10 conversion kit

Axon have introduced a new conversion kit for the BD10 called the ‘TC10’. Developed to take the best of the high performance Yokomo BD10 and push it to its limits, the first area of focus was the front and rear shock towers that have been redesigned with a new lower profile design. Axon have also developed a new big bore type super short damper specifically for this project as well as a new carbon main chassis and top deck to optimise chassis roll and pitching rigidity. Also included with the kit are new lightweight double joint bushings, new front and rear anti-roll bars, Fusion turnbuckles, Fusion aluminium screws, new spring titanium screws, low friction suspension arm pins and Teflon slider shims.

View more images of the TC10 here

July 1, 2021

Axon BD10 & T4 lightweight double joint bushing set

Axon have released these new double jointed CVD parts for the Yokomo BD10 and Xray T4 for improved steering feel. The Axon lightweight double joint bushing is made from a highly precise aluminium and dramatically improves the performance of the double joint drive shafts. The clearance between the inner and outer cross shaft pins has been optimised for maximum drive efficiency and it is also very strong and durable, which dramatically improves the acceleration of the machine. The double joint cross shaft is made of high strength steel instead of aluminium for maximum precision, and the outer race is ultra precision polished. This part plays an important role in the connection between the outer and inner shafts of the drive shaft, so the high rigidity from the steel material provides the best traction. Completing the parts are machine cut cross shaft pins another key part of the drive shaft. All parts are to be used with manufacturer original shafts and axles.

Source: Axon [team-axon.com]

June 25, 2021

Yokomo Zero-S series of drift motors

Yokomo have introduced their ‘Zero-S’ series of drift motors. Available in 3 colours including black, red and purple, which have been requested by many users to best match with the colours of the YD-2 series of cars. Although it has a slightly more torque, it has a smoother throttle feeling than previous versions, which makes it easier to handle in the low to medium speed range and it is set to make traction control easier in RWD drift cornering and straight.

Source: Yokomo [teamyokomo.com]

June 21, 2021

Yokomo Racing tools

Yokomo have introduced these new budget friendly high quality racing tools. Sporting a high-quality high-carbon steel tip bit and racing red anodised aluminium handle, they have combined ultra-reasonable pricing while maintaining quality. Available as a 4-piece set comprising of 1.5 & 2.0mm hex and 5.5 & 7mm nut driver it is perfectly suited to work on the likes of the YD-2 series. Each tool is also available separately.

View more details here

June 3, 2021

Yokomo YD-2 S RX Conversion

More new drift specific parts from Yokomo who have introduced this RX Conversion for YD-2 S series chassis. The set can convert the high mount midship motor YD-2S series to the graphite double deck chassis of the rear motor. In addition to the main parts such as the main chassis, upper deck, gearbox and motor mount, all the screws required for replacement are included, so you can easily try the latest RX specifications. As with the RX chassis kit, there is three colours available to choose from such as black, purple and red.

View the different colour conversion kits here