Red RC » Yokomo

June 28, 2017

Yokomo roll out new YZ2 option parts

Coming from Yokomo and made for the YZ2 2WD buggy are new option parts in the form of a 1.0mm gearbox spacer set as well as a rear shock tower and 3-gear motor plate for raised gearbox setups. Starting with the gearbox spacer set, the set includes a gearbox spacer, a rear suspension mount spacer as well as front brace spacers all of which will raise the gearbox and all attached parts by 1.0mm. Raising the transmission will result in increased chassis roll which can be beneficial especially when running lightweight LCG battery packs or when less angled rear driveshafts are needed.

Continue reading here

June 28, 2017

Exotek 22 4.0 Ti front axles & YZ2 alloy top shaft

Coming from Exotek are the new Flite front axles for the TLR 22 4.0 and an aluminium top shaft for the Yokomo YZ2. Starting with the front axles, the Flite titanium front axle shafts include a 12mm front hex and at 3.5g per set they greatly reduce unsprung weight over the stock axles. Machined from high-quality titanium they are almost as strong as steel but much less prone to bent as the aluminium axles. The rounded and angled hex profile makes wheel installation extra quick and easy and the axles are a direct fit on the TLR 22 4.0.

Continue reading here

June 26, 2017

Radtec BD8 0 degree alloy C-hubs & 41.1mm drive shafts

Coming from Radtec and made for the Yokomo BD8 touring car are a 0 degree C-hub set and a pair of 41.1mm steel double joint drive shafts. Starting with the C-hubs, the parts are machined from high-quality aluminium and they are a direct fit on the ARS rear suspension. Due to using alloy over composite material the overall stiffness and stability is greatly improved which results in increased traction and better drivability on high-traction surfaces. The hubs come black anodised and with silver edge details for looks. Also new is a set of 41.1mm front Premium spring steel drive shafts. They are of a double joint design, use lightweight centre couplers and they are a direct replacement for the stock parts.

View more images here

June 24, 2017

Vigor RC BD8 0 degree aluminium C-hub

Coming from Vigor RC and made for the Yokomo BD8 touring car is an aluminium 0 degree rear C-hub. The hub is machined from high-quality 7075 alloy, it weighs in at only 4.9g and is made to replace the composite part of the RTC system, resulting in improved precision and more traction. The C-hubs come in pairs and use a grub screw to hold the suspension pins which further adds to the overall precision.

Source: Vigor RC [vigorrc.com]

June 22, 2017

Yokomo BD8 40T diff pulley conversion kit

The 40T belt pulleys that are part of Yokomo’s BD8SV Stock touring car are soon also available separately for all BD8 owners. Designed to improve overall drivetrain efficiency the set will be beneficial for both stock and modified racing classes as with the 40T pulleys the car will gain balance and overall efficiency compared to the standard 34T pulleys. Traction is increased while the higher corner speed and smoother throttle response will lead to lowered and more consistent lap times. The set includes a 40T front pulley, 40T gear differential, carbon fibre shock towers as well as bulkhead spacers and new longer belts. Separately available are also the updated front and rear shock towers, the 1mm bulkhead spacers and the C bulkhead all of which are specially designed to fit the 40T belt pulleys.

View more images here

June 22, 2017

Yokomo BD8SV Stock touring car kit

Coming soon from Yokomo is the BD8SV Stock touring car kit that is aimed especially at stock class racing. Based off of the popular BD8 the SV kit will feature larger 40T diff pulleys for increased drivetrain efficiency and optimised chassis roll balance. Also included is the PCS Pitch Control System that improves chassis stability at high speeds and during cornering while a milder steering response makes it easier to carry the momentum through corners without sacrificing overall steering emphasis. The BD8SV comes as full kit from the end of June with a conversion set for current BD8 owners being available in the near future.

View more images here

June 16, 2017

Yokomo YD-2 adjustable front steering blocks

Coming from Yokomo and made for the YD-2 series of drift cars are adjustable front steering blocks. The design allows to fine-tune the king pin angle using 0.5mm or 1.0mm spacers with the default setting being +1 degree and by adding the 0.5mm spacer an additional degree is accessible. Optional aluminium stopper pins ensure precise steering lock with the pins being available with 4mm or 5mm diameter to achieve different lock angle settings. The steering block set is made from high-quality aluminium, it includes the steering blocks and steering block adapters as well as a set of 0.5mm and 1.0mm shims. In additional to the optional stopper pins also a set of steering block weights is available to further fine-tune the steering characteristics.

View more images here

June 16, 2017

Yokomo Racing Performer touring car springs

First introduced back in March, Yokomo have now announced the official release of the Racing Performer touring car shock springs. The specifications of the springs have been adjusted for even greater performance and thus the release was rescheduled with the parts being on sale now. Developed in cooperation with Yokomo’s Ronald Völker, the springs are available as linear 2.6 to 3.2 and progressive 2.6-2.8, 2.8-3.0 and 3.0-3.2 types and they allow to setup the car to pretty much every track condition from slippery to high-grip. The black-coated and laser-engraved spring are available separately and also as complete 7-pair set.

Source: Yokomo [teamyokomo.com]