Red RC » Yokomo

December 20, 2016

Axon High Big Bore Shock 1/10th touring car dampers

Japanese company Axon have introduced their all-new High Big Bore Shock absorber for 1/10th touring cars. Designed to deliver maximised corner speed the dampers offer an increased volume while maintaining an outer diameter compatible to most of today’s shock springs. A unique shock body design with a tapered upper section near the shock cap also makes for very well balanced progressive damping which further helps to up speeds in corners. The shocks come in sets of four, including 3-hole pistons, and they are available in variants for the Yokomo BD7/DB8, Xray T4 and Tamiya TRF 419X. Not included are the upper and lower ball ends, spring cups and springs with these parts need to be taken from the respective chassis kits.

View the three different types here

December 15, 2016

T-Works large diameter M3x4mm aluminium screws

Coming from T-Works are new large diameter M3x4mm aluminium screws. They are machined from high-quality 7075-T6 aluminium and come black anodised for wear. The 7mm diameter head makes the use of additional shims or washers unnecessary and the screws are ideal to securely hold the spur gear or steering bellcranks on cars such as the Yokomo BD8 or comparable vehicles.

View more images here

November 30, 2016

Yokomo YD-2 solid axle set

Coming from Yokomo and made for the YD-2 series of drift cars is a solid axle set. Sporting the standard gear diff case the set includes a solid inner block that couples the outdrives to create a solid axle setup with makes for a more aggressive drift while increasing traction at the same time. Using the axle also makes for quicker transitions on high-grip surfaces. The axle set is usable with the YD-2 and YD-2 Plus kits.

View another image here

November 30, 2016

T-Works BD8 hard foam bumper

T-Works have introduced a new hard foam bumper suitable for the Yokomo BD7, BD7’16, & BD8. The new bumper extends 6mm further out the front to eliminate the need to apply additional foam pieces when the body shell is mounted further forward on the car.

Source: T-Works [rc-tworks.com]

November 22, 2016

Yokomo YZ-4 double joint universal shafts

Yokomo has released these new front double joint universal shafts for their YZ-4 buggy. Aimed at use on high grip surfaces that require more steering, higher acceleration and harder braking they are supplied with special bearings, which replace the current inner bearing in the steering block. The new shafts help reduce the friction loss while steering and allow for smoother cornering which in turn reduces lap times.

Source: Yokomo [teamyokomo.com]

November 21, 2016

Yokomo Zero 2 sport-level brushless motors

Coming from Yokomo are the new Zero 2 series sport-level brushless motors. Featuring a newly designed and black anodised aluminium can the motors are available in a range of windings including 6.5T and 8.5T modified as well as 10.5T to 30.5T stock variants. The fully enclosed design without cooling openings result in a motor that requires very little maintenance even when operated in dusty conditions and the motors come pre-wired with bullet-type connectors, compatible with many entry and sport-level brushless speed controllers.

Source: Yokomo [teamyokomo.com]

November 21, 2016

Yokomo BL4 series brushless speed controllers

Yokomo have updated their line of high-performance brushless speed controllers and now introduce the BL4 series. The range includes the BL-Pro4, BL-RS4 and BL-SP4 with the BL-Pro4 being a top-of-the-foodchain ESC with an all-aluminium case, 1-cell LiPo booster, a new cooling fan and an aluminium cooling fan guard. A new firmware allows for better control over the boost, turbo delay and slope functions as well as the brake frequency. On top of this the controller sports all-black wiring for that cool factory look.

Continue reading here here

November 16, 2016

JConcepts 2WD buggy lower front wings

JConcepts’s popular 2WD buggy lower front wing series is now available for all popular 1/10th 2WD buggies on the market. The range includes sets for the Team Associated B5/B5M, B6/B6D, TLR 22 3.0, Yokomo YZ2, as well as the Xray XB2 and Kyosho RB6.6. All include tailor-designed front wing mounts made from injection-moulded and durable material as well as a V-angle front wing. The wing mount itself attaches with supplied hardware to the top deck on TLR, Yokomo, Xray and Kyosho vehicles while the Team Associated versions mount directly to the front shock tower. Cut lines are included for easy trimming while dimples are located on the wing itself to indicate where to mount to the front wing mount.

View more images here