Red RC » Yokomo

July 5, 2016

Techra double joint shafts & 1/10th buggy wings

Coming from Techra are a range of double joint driveshafts for 1/10th touring cars as well as two 1/10th buggy rear wings. Starting with the driveshafts, the parts are of the now-common dual joint design to reduce wheel chatter and improve efficiency at high steering angles. The are machined from high-quality spring steel, come with a hardened surface and they are available in a range of specifications including 41.3mm front and 39.3mm rear variants for Xray and VBC cars and also 40.6mm front and 39.1mm rear variants for the Yokomo BD7. All come laser-etched with respective markings for easy identification.

Continue reading here

June 30, 2016

Yokomo YD-2 & YD-2 Plus RWD drift car chassis kits

Coming from Yokomo are two new drift car chassis in the form of the YD-2 and the YD-2 Plus. The RWD design offers a good balance between acceleration and stability, which can be beneficial in the Tsuiso Battle called tandem and twin races, making the car also very controllable at full counter drifting. The kit will be available in two specification with the YD-2 coming with a standard composite bathtub lower deck while the Plus kit is equipped with a carbon fibre double deck chassis. Another difference between the kits are the shock absorbers with the standard kit coming with slightly simpler shocks while the Plus includes aluminium big bore shock absorbers. Otherwise both cars feature a 4-gear transmission, aluminium motor plate, long springs, a high angle steering system, full ball bearings, rear universal driveshafts, and the ability to run standard or shorty battery packs. The standard YD-2 kit is available with our without YG-302 gyro unit while the Plus is only available without.

View more images here

June 29, 2016

CSO BD7 hard-coated spring steel outdrive cups

CSO have introduced a set of hard-coated spring steel spool outdrive cups for the Yokomo BD7 touring car. The parts are machined from high-quality spring steel and finished with a special hard-coat that greatly improves wear characteristics. The parts are direct replacements for the kit’s front spool outdrives.

Source: CSO [cso.com.hk]

June 27, 2016

Active Hobby EPT bulkhead setup block

Japanese company Active Hobby Products have introduced their new EPT bulkhead setup block tool. Taking the idea of a bulkhead alignment tool a step further, the block also takes spool and diff axle alignment into consideration. First up the tool helps to align both the left and right hand bulkhead halves with an axle shaft dummy then also allowing to check the clearance and proper fit of the eccentric bearing and belt tensioner inserts while also allowing to check for any misalignment as result of a crash. Machined from aluminium and available in a range of colours, the tool is usable for 20mm bulkhead width cars such as the ARC R11 and R10 as well as 22mm kits such as the TRF419 and Yokomo BD7.

View more images here

June 24, 2016

Yokomo BD7-2016 Japan Edition asphalt spec kit

Yokomo have introduced the BD7-2016 Japan Edition kit that is specially aimed at asphalt racing. The limited edition is based off of the standard 2016 but it features some asphalt-specific option parts such as aluminium steering limiter screws, a front belt tensioner set, 43.5mm FR aluminium suspension mounts, SLF short II shock diaphragms, pink SLF short II springs, a titanium turnbuckle set as well as aluminium steering bellcranks and the 44mm C-clip rear universal shafts. Also included is a dedicated asphalt spec carbon fibre chassis. The Japan Edition kit will be in use by the Yokomo factory team at the forthcoming JMRCA nationals in July.

Source: Yokomo [teamyokomo.com]

June 23, 2016

Active Hobby YD-4 alloy steering rack & other optionals

Coming from Active Hobby Products and made for the Yokomo YD-4 drift kit are three new option parts in the form of an alloy steering rack, a composite rack arm set and a body mount bar. Starting with the aluminium steering rack, the part is CNC-machined from 7075 aluminium and it makes for improved steering precision while being very light of weight at the same time. The rack comes laser-etched for looks and it is available in a range of colours including black, silver, hard anodising and also dark blue and red.

Continue reading here

June 23, 2016

Techra introduce new on-road & off-road option parts

Coming from Techra are several aluminium and carbon fibre option parts for a range of kits. First up are aluminium body height adjusters for Yokomo, Xray and VBC touring cars. Machined from 7075 aluminium and coming black anodised and with machined silver details, their design allows to use the parts with Yokomo-style 2mm and Xray/VBC-style 2.5mm body post pins. As usual with these type of adjusters the design of the parts allows for virtually step-less body height adjustments.

Continue reading here

June 23, 2016

Pro-Spec introduce touring car Racing Belts

Japanese company Pro-Spec have announced the release of their new Racing Belt line of drivetrain belts for a range of touring cars. Available for most of today’s kits such as the Xray T4, Kyosho TF7, Tamiya TRF419X, Yokomo BD7-2016 and 2015, Awesomatix A800 and the R11, the Bando belts ensure a high efficiency and durability for a reliable low-drag drivetrain.

Source: Pro-Spec [pro-spec.jp]