October 21, 2013

Vectorworks RC SCTE shock towers

Vectorworks RC SCTE shock towers

Vectorworks RC introduce their first products for the Losi/TLR SCTE line of 4WD short course trucks. Available now are front and rear carbon fibre shock towers made from 4mm press-cured high-quality material. The front tower offers four shock and six camber link locations while the rear item comes with three shock and five camber link holes. Both parts are a direct replacement for the stock shocks stays, are very light of weight and enhance the visual impact of the chassis.

Click here to view the rear shock tower


October 21, 2013

MR..Roche Zip Friction aluminium pinion gears

MR..Roche Zip Friction aluminium pinion gears

New from MR..Roche come the Zip Friction aluminium pinion gears. Especially designed for Stock class and VTA racing, the gears are precision-cut from 7075 aluminium, sport an ultra lightweight design with milled out sections and they feature a special low-friction anti wear coating. The 64dp gears are available in a wide range of sizes racing from 40T up to 60T with the tooth numbers being laser-etched to the pinion to make choosing the right size easy.

Source: Roche [mr-roche.com]


October 19, 2013

Smokem Racing 417LX steering arms

Smokem Racing 417LX steering arms

Smokem Racing has just released their new 417LX steering arms. These 417LX steering arms are 2mm longer than those found standard on the TRF417 line of electric tourers. The extra length in these steering arms translates to a longer swing radius. Not only does this provide increased steering throw, it also gives a more linear steering response for superior driving feel. The 417LX steering arms come pre-fitted with metal-shielded ball bearings for an ultra smooth response. They suit all of Tamiya’s TRF417 and TRF416 lines of electric touring cars.

View the individual parts here


October 18, 2013

Avid B44.2 brass chassis weight

Avid B44.2 brass chassis weight

Designed for the Avid B44.2 hard-anodised aluminium chassis kit is this 31g brass weight insert. It rounds out the already existing range of delrin, aluminium and steel inserts in order to provide a maximum of tuneability. The insert attached to the chassis via 4-40 screws and adds 31g of weight between the saddle pack battery, something that can be helpful on low-bite or very bumpy tracks.

Source: Avid [avidrc.com]


October 18, 2013

LRP S10 Twister & Blast carbon fibre option parts

LRP S10 Twister & Blast carbon fibre option parts

LRP introduce new carbon fibre option parts for the S10 Twister and Blast series of club-level off-road vehicles. Available soon are 4mm front and rear shock towers that lower the weight and centre of gravity of the chassis while offering added rigidity at the same time. They are available separately, come with suitable mounting hardware and the series includes specific parts for the S10 Twister BX, Twister TX/SC and Blast BX/TX/MT/SC. Also for the 4WD S10 Blast series come 4mm front and rear topdecks, the parts also lower the overall weight of the cars while offering improved durability and looks.

Click here to view the other new parts


October 18, 2013

Exotek RB6 titanium front axles

Exotek RB6 titanium front axles

New from Exotek come these titanium front axles for the Kyosho RB6 2WD buggy. At 5.5g per pair their are almost 50 percent lighter than the stock steel shafts while offering nearly the same rigidity. They are a direct replacement and designed to work with the stock spacer set.

Source: Exotek [exotekracing.com]


October 17, 2013

JConcepts B4, T4 & SC10 front suspension brace

JConcepts B4, T4 & SC10 front suspension brace

New from JConcepts comes this front suspension brace for Team Associated B4, T4 and SC10 vehicles. The all aluminium machined and anodised brace is spot on in terms of geometry, fit, finish and position. The tightened design eliminates extra bulk and weight with deep cutouts. As a bonus the new front suspension brace is designed around and includes a heavy-duty 4-40 x 5/16” button head screw instead of the stock 2/56 screw set. The part is a direct fit and available in blue or black colour.

Click here to view another photo


October 17, 2013

JConcepts aluminium shock bottom pivot balls

JConcepts aluminium shock bottom pivot balls

Made for many Team Associated 1/10th off-road vehicles is this aluminium pivot ball set from JConcepts. The CNC-machined and blue anodised lower pivot balls are of a serrated design to twist into the plastic for a more secure shock fitment even when the going gets tough. The rear part features an extended standoff to move the shock further away from the turnbuckle allowing additional clearance. 4 pieces are included per package including 2 standard front pivots and 2 of the extended, serrated pivots and longer screw for the rear with the balls being available in blue or black colour.

Click here to view the colour variant