Red RC » Accessories

September 4, 2013

Xray NT1 front and rear bulkheads

Xray have new front and rear bulkheads for the NT1 200mm nitro touring car available. They are made from a new, harder material and ideal when racing in high ambient temperatures or on high-traction surfaces. The front bulkheads were redesigned to accommodate the new front wire anti-roll bar system. The rear upper camber link position on the bulkhead clamp has been provided to increase stability and is recommended for use in very high-traction conditions or when using large-diameter tires in order to help prevent traction rolling. The super-lightweight bulkheads have a very clean and lightweight design and a special composite mixture was developed to allow repetitive assembly and disassembly without stressing or wearing out the parts. All four bulkheads are available as separate items.

Click here to view another photo

September 4, 2013

Schumacher pre-cut touring car rear wings

Schumacher announce the introduction of new pre-cut touring car wings. Available in clear, black or with a carbon look the wings do away with the often fiddly need to cut and dremel a usable wing out of the sets supplied with body shells. They are a simple bolt on and go racing item, come including end plates and mounting tape and they meet both EFRA and BRCA regulations.

Click here to view more photos

September 4, 2013

Exotek RB6 alloy C-hubs & mid motor rear bulkhead

Exotek have new aluminium option parts for the Kyosho RB6 buggy available in the form of C-hubs and a mid motor rear bulkhead. Starting with the castor hubs, the parts are CNC-machined from 7075 aluminium and come anodised in Kyosho factory red colour. They weight in at 7g per set and are much stronger than the stock plastic hubs. The second new part is the mid motor rear bulkhead, again machined from 7075 aluminium. Coming red or black anodised the part is machined to weight just 12g while offering exceptional durability at the same time. The bulkhead works both with the stock plastic and Exotek’s optional carbon fibre shock tower.

Click here to view more photos

September 3, 2013

JConcepts RB6/RT6 honeycomb motor mount

Following variants for Team Associated and TLR off-road vehicles JConcepts now release the honeycomb motor mount for Kyosho RB6 and RT6 kits. Machined from 3mm aluminium the motor plate features a special design to increase stiffness compared to conventional slotted heatsink motor mounts while still being light of weight thanks to numerous milled-out pockets. The motor mount is a direct replacement and available in blue or black colour.

Click here to view the black colour variant

September 3, 2013

Protoform Better Edge sanding block

Better Edge sanding block

Protoform introduce the Better Edge sanding block made from injection moulded nylon and covered with a strip of 120-grit sand paper. Designed to smooth out scissor imperfections along the bottom edges or rear wing of on-road and off-road bodies, the block also features two different diameter rounded ends for wheel wheels or suspension cut outs. It can also be used to sand parts and tyres. Each block includes a form-fitted strip of sand paper fastened to the block with a low-profile hook-and-loop system. A spare strip is included and replacement strips are available in 2-packs.

Click here to view more photos

September 3, 2013

Xray XB4 aluminium off-set wheel hubs

Xray have new aluminium off-set wheel hex adapters available. Coming as +0.75mm or -0.75mm variant they are designed to take influence on the overall width of the car and are machined from high quality aluminium. The black colour clamp-type hubs come as pairs and are a direct replacement for the stock hex adapters.

Click here to view the +0.75mm hubs

September 3, 2013

Team C twin fan heatsink mount

Team C Racing introduce this twin fan mount for 25mm to 45mm units. CNC-machined from high-quality aluminium and coming in orange or gun metal colour the 2-piece mount allows the installation of two fans in the motor area to maximise the cooling effect. Four different mounting patterns allow the use of 25mm, 30mm, 40mm or 45mm fans with the overall design targeting electric touring cars but it is understood that the mount will fit other types of vehicles too.

Click here to view more photos

September 3, 2013

T.O.P. Photon & Sabre alloy rear hubs

T.O.P. introduce optional aluminium rear hubs for the Photon and Sabre line of touring cars. The updated parts feature an additional inner camber link mounting position to run a shorter link setup for more agility during cornering and increased grip out of the turn. CNC-machined from aluminium and coming red anodised the hubs fit the Photon and Photon EX as well as the Sabre FD and FD2.

Source: T.O.P. [top-racing.jp]