Red RC » Accessories

September 21, 2020

LCG Racing SFX motor mount carbon brace

LCG Racing offer this new carbon brace for their Yokomo BD10 and the Xray T4 2020 SFX conversion kits that helps to further stiffen the motor mount longitudinally. The carbon brace makes the motor mount more rigid and also doubles up as a battery stopper with increased area. Additionally by minimising flex the longitudinal stiffness helps with corner speed and give the car a more direct response. The lightweight brace is made of high quality carbon fibre, features the engraved SFX logo and comes in either the SFXY Yokomo or SFXX Xray version.

Source: LCG Racing [facebook.com]

September 21, 2020

Xtra Speed Capra damper mounts

New from Xtra Speed for the Axial Capra 1.9 Unlimited Trail Buggy are these optional damper mounts. Made from black anodised aluminium, these new parts provide the user with a wide range of new shock mounting angles to choose from. Supplied with the mounting hardware, they are a direct bolt on addition.

Source: Xtra Speed [facebook.com]

September 18, 2020

MiBorg Sakura D5S rear RCV driveshafts

Coming from MiBorg and made for the 3Racing Sakura D5S drift chassis are these new rear RCV driveshafts. Utilising the design of full-scale cars the driveshafts use steel balls instead of cross pins to drive the wheel axle, which results in less vibration even at high steering angles. This leads to a more predictable handling, higher corner speeds and less tyre wear. In addition the wheel axles allow the use of standard thickness bearings while lighter, pin-less wheel hex adapters reduce overall weight.

Source: MiBorg [miborg-rc.com]

September 18, 2020

T-Works TC-01 spur gear adaptor & suspension balls

T-Works continue to release new parts for the Tamiya TC-01 with the new parts focussed on shedding weight where possible. First up is the spur gear adaptor, which has been made from hard coated 7075 T6 aluminium, the new material along with the minimal design, help to bring the weight down from 7.1g to 2.1g. Next up is the new suspension balls, again from the same material, the weight saving is 4 grams (8 pieces) over the standard parts. Finally the 24 piece ball end set, again made from hard coated high quality aluminium, helps in reducing the weight from 27.5g to just 7.3g, which when you combine it with the other two new items gives you a total weight saving of nearly 30grams.

View the other new parts here

September 17, 2020

Team Powers high airflow cooling fan

Team Powers have introduced the latest version of their high airflow cooling fan. The casing has been machined from 7075 aluminium and sports 2 screw holes in the base so it can be mounted to the chassis directly, while a high magnet core prevents the fan from stopping when it’s too close to car’s motor. The fan is 30mm x 30mm and is 12mm thick which is an extra 2mm compared to the previous version for improved air flow.

Source: Team Powers [team-powers.com]

September 17, 2020

RC Maker T4’20 carbon hub extension plates

RC Maker have developed some beefed up extension plates for the Xray T4’20 alu steering hubs. They have also integrated an M3 pressed insert which completely does away with the nut on top of the arm. There’s specific versions for front and rear to maximise strength in each position whilst ensuring required clearance from hubs/wheels. Compared to stock the new plates are thicker at 3mm and have the inner link position removed, while the new profile of the arm has increased strength and flex.

content

September 17, 2020

Rebellion RC body distance system

New from Rebellion RC comes their body distance system which supports the body shell directly over the front wheels. The system is mounted to the car’s c-hub and its adjustable design makes it possible to fine-tune the mounting height of the body. Because the body no longer moves up and down with the chassis you can position the body lower than ever before, which in turn improves aerodynamics. The black holders directly replace the original 2mm shims under the pivot ball like those found on the T4. The set comes supplied with plastic end-caps for improved body longevity.

View the mounted system here

September 16, 2020

JConcepts AX10 / SMT10 transmission motor plate

JConcepts has rolled out a sweet looking replacement motor plate for the Axial SMT10, AX10, SCX10 and Wraith vehicles, or similar models equipped with the AXI30491 motor plate. With the evolution of racetracks, high flying jumps are becoming the normal obstacle and it is inevitable that a driver will have a miscue and challenge the durability of the vehicle. Looking at the typical construction of the second operation processes on standard motor plates, it easy to see why bending is sometimes an issue. The design team at JConcepts has incorporated a honeycomb milling affect with placement more suited to surrounding geometry making the plate lightweight and very rigid in multiple directions. The honeycomb features add a 3D look featuring the natural aluminium while the rest is black anodised. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look slim and trim.

Source: JConcepts [jconcepts.net]