PSM have released a set of CVD axles for the Kyosho MP9 TKI3. Made from high grade 7075-T6 aluminium to reduce the drivetrain’s rotating mass, this set is super lightweight, only 30g total, and very durable. A direct replacement for the original axles, the complete set consists of 6 pieces and includes all the necessary hardware to complete the upgrade.
Source: PSM [psm-shop.com]
Capricorn have released this new big bore shock set for the Lab C02 1/10th 200mm chassis. The kit includes four complete shocks, with a set of springs and includes 6 shock holes piston as well as the new lower shock towers front and rear. The new shock set helps improve traction and also reduces the centre of gravity. Also new for the Lab C801 are these carbon plates for front steering blocks of the Lab C801 which help reduce the sensitivity of the car while maintaining the same level of steering.
Exotek have released some new optional parts for the Kyosho RB6. First up are these machined and anodized alloy spring perch sets for the Kyosho big bore dampers. Extra milling for a lightweight design but the reinforced strength of quality CNC cut aluminium. Milled holes also help reduce debris from collecting inside. Available in red or black. Also for the RB6 are these heavy duty suspension hangers. Precision cut from high strength 7075 and finished with a polished anodizing they come in black or red for the rear and front of the rear lower suspension. Available in RR, RR2, RF & RF2 versions.
View the suspension hangers here
Associated have released more new 12mm big bore shock pistons to increase the tuning options of your big bore shocks. Flat, machined pistons of two 1.6mm holes, three 1.4mm holes, and four 1.3mm holes are available in packs of four. The Big Bore shocks fit the B4.2, B44.2, T4.2, SC10, SC10B, and SC10GT, including RTR and FT versions.
Source: Associated [teamassociated.com]
Schumacher have released a complete gear diff for the Cat K1. The new diff provides lots of run time between maintenance rebuilds and with steel gears is super strong. Suitable for a wide range of conditions but very good in high grip as it can give more drive and rotation. For Cougar SV2 the wide track modification improves stability in corners and over bumps. Recommended for narrow overhang tyres such as Schumacher Minispikes, wide overhang tyres may cause a problem with width rules.
View the wide track modification here
PSM have released new front and rear carbon shock towers for the Agama A8. The front tower is made from glossy 5mm carbon fibre, while the rear is made in 4mm. Both towers are lightweight with the front weighing only 21.5g and the rear 23g with both designed for US-Style tracks. These parts are a direct replacement for the original parts.
The Revolution Design 210 Series aluminium steering plate R2 is specially designed for the Team Durango 210 series vehicles including the DEX210, DEST210 and DESC210. The plate is totally redesigned from scratch and sports a new vertical inner ball stud position. This in combination with a more central and lower position of the ball studs does away with the need to use countless shims on the outer steering blocks in order to achieve zero bump steer. The steering plate is a direct replacement for the stock part and is CNC-machined from aircraft-quality 7075-T6 aluminium and comes black anodised and laser-etched for easy identification and a cool factory look.
Source: RDRP [revolution-rc.com]
Tekno RC have produced new carbon fiber shock towers for their SCT410 and EB48. At 4mm thick for the rear and 5mm thick for the front these shock towers will withstand the hardest of hits and are a direct fit removing 18 grams total weight from the SCT410 and almost 34 total grams on the EB48. With this decreased weight, the center of gravity will be lowered keeping your car even more planted on the track hugging those fast corners better than before. Tekno RC also now offers a stock zero-offset aluminium hex for the SCT410. These wheel hexes will fit all 12mm SC wheels and with a 6mm bore, they will fit all M6 driveshaft kits. CNC machined from high quality aluminum then hard anodized for wear, these hexes will withstand the test of time.
View the other new products here
