Red RC » Accessories

April 12, 2013

Traxxas 12mm hex wheel adapters

Traxxas announce aluminium 12mm hex wheel adapters for the 1/10th rally, Slash 4×4 and Stampede 4×4. Originally designed for the XO-1 Supercar, steel-splined driveshafts with 6mm axles can now be added to Traxxas’ Slash 4×4 based off-road vehicles. The adapters feature a 6mm inner diameter to accept the beefier axles, they are easy to install and compatible with Traxxas short course and rally as well as most standard 12mm hex-style wheels. The machined aluminium construction provides maximum performance while included screw pins replace the standard axle pins. The kit comes with a 6mm drill pit to modify the wheels.

Click here to view a picture of the installed parts

April 12, 2013

Tekno 17mm hub adapters & shock O-rings

Tekno RC announce 17mm hub adapters for the SCT410 trucks as well as a 16-piece O-ring set for Tekno and Hot Bodies big bore shocks. Starting with the hub adapters, the conversion kit is designed to allow the use of 17mm hex 1/8th buggy wheels on the truck for racing it in outlaw classes or to create an ultra-lightweight 1/8th buggy. Included in the set come hardened steel stub axles, lightweight 17mm wheel hubs, serrated wheel nuts and all needed hardware. Also new is a 16-piece shock O-ring set for Tekno RC big bore and Hot Bodies D8 shocks. The set includes enough seals to rebuild 8 shocks so you always have enough spares in your spares box.

Click here to view the other new part

April 12, 2013

Arrowmax T4 aluminium spring retainers

Arrowmax introduce new aluminium spring retainers for the Xray T4 touring car. They are machined from aluminium and come strategically milled to reduce weight. Designed as a direct replacement they offer higher strength and a more precise spring support.

Source: Arrowmax [arrowmax-rc.com]

April 11, 2013

T.O.P. Sabre FD Mini steering crank set

T.O.P. Racing have released this optional steering crank set for the Sabre FD Mini. The new CNC-machined alloy part helps improve the steering response/precision and cornering stability over the original steering assembly. Comes complete with bearings and everything needed to convert from the original kit part.

View the mounted steering crank here

April 11, 2013

Hudy XB4 aluminium shim for setup system

Hudy have released this aluminum shim for the XB4 which fits on the rear wheel axle, and the set-up system leans against the shim. For use with XRAY XB4 or any off-road car on which the set-up system cannot be inserted on the non-threaded part. The set-up system will then sit properly on the threaded area of rear wheel axles only.

Source: Hudy [hudy.net]

April 4, 2013

JQ Products 2013 pre-season value kit

JQ Products introduce their THECar 2013 pre-season value kit. Included in the set, that is based around the Yellow Edition buggy, are option parts such as a new wide chassis, a new Ackermann plate, throttle and break linkages to match the new chassis dimensions, a new rear chassis brace and a new right side guard. The included parts have a value of roughly 100US$ and are also available as a set for everyone who wants to update an existing Yellow Edition buggy. The parts are designed to make for a more stable and easier to drive vehicle that behaves less aggressive. Later this year all parts will also become available separately.

Source: JQ Products [jq-products.com]

April 4, 2013

CSO aluminium lightweight layshaft clamp

CSO introduce this aluminium lightweight layshaft clamp for the use with the CSO-1 and Xray T4 cars. The part is designed to hold the layshaft bearing so there is no need to run the respective top deck screws giving for more chassis flex and therefore faster cornering. The parts come as pair and are simply secured to the layshaft holder using two screws.

Click here to view another photo

April 4, 2013

Tresrey ‘410 series rear gearbox inserts

Coming soon from Tresrey are these aluminium rear gearbox inserts for the Team Durango DEX410 buggies and DESC410 trucks. The parts are CNC-machined from high-quality aluminium and increase the rigidity of the rear bulkhead to avoid gear box trouble in the event of a crash or hard landings. Coming in sets of two and anodised in Tresrey red the parts are a direct replacement for the stock plastic inserts.

Source: Tresrey [tresrey.com]