Red RC » Accessories

July 31, 2012

Xray NT1 progressive springs

From Xray for the NT1 these new progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with the hardest at the end. Pearl-grey color and laser engraved for easy identification they are available as a pair, with the springs individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values are recorded. Each spring is then matched with another spring of identical characteristics.

Source: Xray [teamxray.com]

July 28, 2012

KM H-K1 EvoII universal shafts

KM introduce these steel and aluminium front universal shaft assembly for the KM H-K1 200mm on-road chassis. The shaft hub is CNC-machined from high-quality hardened red steel with the shaft joint being made from hard coated 7075-T6 aluminium. The shaft hub is precision ground for maximum accuracy and optimised bearing fitting. Both the hub and joint are also available separately.

Source: KM [km-rc.com]

July 27, 2012

T.O.P. Photon EX suspension mount inserts

T.O.P. introduce these lightweight suspension mount inserts for the Photon EX touring car. Designed to replace the stock steel inserts with a lighter and better looking solution the inserts are machined from aluminium, are red anodised to match the other alloy parts of the car and come in set of eight.

Source: TOP [top-racing.jp]

July 27, 2012

Exotek DEX210 aluminium option parts

Exotek Racing announce a host of option parts for Team Durango’s DEX210 2WD buggy. Available are an aluminium CNC-machined orange anodised steering link, steering cranks and alloy 15mm wheel hexes. The steering link is less prone to break or flex and makes for a more precise steering response. The same applies to the steering cranks that also add strength to the steering assembly of the 210. The levers feature left and right servo horn mounting positions and are supplied as pair. Last but not least are the orange anodised wheel hex hubs. They come as pair, are available as 4.75mm and 6.25mm offset version with laser-etched markings and are usable on the DEX210 and DEX410 kits.

Click here to view the other new parts

July 26, 2012

Yeah Racing T plug soldering jig

Yeah Racing introduce this soldering jig for Deans Ultra plugs and many other connectors. Made from CNC-machined aluminium the jig securely holds the connector in place via a spring-loaded pressure plate for easy and secure soldering.

Source: Yeah Racing [yeahracing.com]

July 26, 2012

Xray XB9 progressive springs

Made for the XB808 and the XB9 are the new progressive springs from Xray. They feature softer rate at the beginning and become harder during compression to generate more grip and higher corner speed. They come laser-etched for easy identification, are available as pair and are usable on both the front and the rear of the buggy. Available as soft, medium-soft and medium type.

Source: Xray [teamxray.com]

July 25, 2012

Spec-R Sport Series swing shaft

A new release from Spec-R is the Sport Series swing shaft. It is made from hard coated steel with a safety ring and at a lower price it is better for the beginner and for practice. Available for Xray touring cars in 50mm & 52mm and for Tamiya touring cars in 44mm & 46mm.

Source: Spec-R [spec-r.com]

July 25, 2012

Tresrey red balancing clay

Tresrey have released this red clay for wheel balancing on any RC model from 1/12 Racing to 1/8 Off-road. Simply press it directly into the inside of the wheels and it will stay there. Easy for fine tuning and adjusting the weight balance. Made in the USA it is available at the end of July.

Source: Tresrey [tresrey.com]