Red RC » Accessories

August 12, 2011

Team Associated B4.1 12mm hex drive

Team Associated is pleased to introduce a 12mm hex drive front wheels for the RC10B4 and RC10B4.1 buggies. Available soon or already are plastic wheel hex adapters including shims and drive pins, B4 front axles for hex use, SC10 steering blocks to go with the hex axles as well as white and yellow 12mm hex disc front wheels. The rear hex adapter allows the TLR22 rear wheel offset to be used and the front wheels also fit the Kyosho RB5 buggy.

Click here to view the other new parts

August 11, 2011

RB 1/8th off-road tyres

Seen for the first time at the recent 1/8 scale nitro off-road European Championship in Sand/Germany, the new line of RB buggy tyres becomes available very soon. Coming in the form of three different medium to fine threads and in supersoft, soft and medium compound the tyres already showed their performance, with the only 11 lap run of the event was done using the RB Dragon thread. The tyres come either pre-glued on dish rims or as rubber only including a multi-purpose insert.

Click here to view another picture

August 11, 2011

Xray RX8 Ultimate Racing Springs

Xray release their new line of Ultimate Racing Springs for front and rear shock absorbers. All feature the same thickness wire with the stiffness being controlled by the number of coils. Softer springs with lower “C“ value have more coils whereas stiffer springs with higher “C“ value have fewer coils. They come black coated and the top of each spring is laser engraved with spring size for quick and easy identification. Available as a pair of C7.0 to C10.0 front and C5.0 and C5.6 rear springs, each one is individually measured, controlled, inspected and matched to provide identical damping characteristics. Also available is a progressive C9.0 spring marked as 7-9 that feature a progressive rating from 7.0 to 9.0 while being compressed, making the car steer better at the beginning of the corner, and resist rolling in the middle of the corner because the spring becomes harder. Recommended for medium-high traction tracks.

Click here to view another picture

August 10, 2011

Edam Spirit rear anti-roll bar set

Edam release a new optional anti-roll bar set for the Spirit chassis. The set contains a multi-piece plastic holder for the rear bulkhead with grub screws to adjust the up and down play when using optional wires of different thickness.

Click here to view another picture

August 10, 2011

Arrowmax MRX-5 rear lower arm shaft

Shortly after releasing front lower suspension arm shafts for Mugen’s MRX-5 1/8 scale on-road car Arrowmax now comes up with suitable parts for the rear end. Made from high-quality spring steel the shafts come as pair and are titanium-nitride coated for reduced friction and enhanced durability.

Source: Free Max [freemaxmp.com]

August 8, 2011

Hot Bodies TCX option parts

Coming soon from Hot Bodies are several new option parts for the TCX 1/10 scale electric touring car chassis. The longer lightweight Solid Axle Long Cup fit the front differential or spool allowing racers to use the 44mm driveshaft instead of the 46mm driveshaft. Also new are the Universal Axle Pin Cover, purple anodised aluminium collars that replace the set screw in the universal axle for a quicker rebuild and increased durability. The collar surrounds the pin and prevents it from slipping out. The part also suits the Cyclone line of touring cars. Last but not least Hot Bodies have new 6-hole 1.1mm Teflon shock pistons available. They come as a pair and also include 6.2x3x2mm spacers and shock rod guide, both made from PTFE.

Click here to view the other new parts

August 8, 2011

Xray RX8 aluminium front anti-roll bar mounts

The aluminium front anti-roll bar mounts for the Xray RX8 allow you to adjust the anti-roll bar independently from down stop setting, so that both settings do not interfere. The new parts also allow for wheelbase adjustments as the anti-roll bar mounts move together with the front arms, and wheelbase adjustment shims that can be added either in front of the anti-roll bar, to shorten the wheelbase, or behind the arm, to lengthen the wheelbase. The parts are CNC-machined from Swiss 7075 T6 aluminium.

Click here to view a picture of the mounted parts

August 8, 2011

Arrowmax RX8 front universal joint set

Arrowmax release a front universal joint set for the Xray RX8. Machined from extremely durable spring steel, the light and durable parts enhance the performance of the car by avoiding the often feared chatter of the front wheels during cornering.

Source: Free Max [freemaxmp.com]