Red RC » Accessories

December 7, 2009

CSO 733 Suspension brackets & Chassis stiffener

CSO Racing in Hong Kong have introduced two new optional parts for the Serpent 733 200mm chassis. First up are these rear lower suspension brackets in a pair for both the lower front and lower rear. Similar in design to the original stock versions, but in a different finish, they are made from 7075 T6 aluminium. The other new part is this chassis stiffening brace that connects the radio plate and rear brake block around the engine to prevent flex in this area. A direct replacement for the standard plastic version, this part is made from 7075 T6 aluminium.

Source: CSO [cso.com.hk]

December 3, 2009

Serpent Light Clutch Bell & Pro CVD axles

Serpent have released some new option parts for both their 1/10th and 1/8th scale chassis’. For 1/8th scale there is this new lightweight bell housing for the Centax II, which has been made from precision machined steel and features a black coating. For the 733 and 720, there are some Pro CVD wheel axles, that have been made made from hardened spring steel and which feature a polished surface where the bearings contact the axles for smoother operation. Sold in a pair.

Click here to see the wheel axles

December 2, 2009

Team AJ RB5 & RT5 front suspension parts

New for the Kyosho Ultima RB5 and RT5, comes these front lower bulkheads and hinge pin plates from Team AJ. The lower front bulkheads have been machined from aluminium and significantly increase the strength in this area of the car. The block can be flipped around so that the user can select between 25 and 30 degrees caster, with markings clearly displaying which is currently being used. The new 0.5mm thick aluminium hinge pin plates again offer strength to the front area by preventing the suspension pins from spreading under impact. Both items are available in anodised, red, black and blue.

Click here to see the individual parts

December 2, 2009

X Factory Box ‘O Bolts

X Factory announces the Box ‘O Bolts, a handy box containing 18 different sizes of 4-40 and 2-56 fasteners, 150 fasteners in total. Included are the 5 most popular sizes of cap heads, 4 frequently used flat heads, 3 button heads, #4 nuts, #4 locking nuts, #4 mini nuts, #4 washers, and the little 2-56 screws you are always losing that hold in AE hinge pins & the little 2-56 flat heads for the bottom cover of an X-5 or XXX-4. The container has 18 compartments, with dividers for all, so your bolts and nuts will always stay separated.

Click here to see the contents of the box

December 1, 2009

Serpent 966 W2 rear uprights

Serpent have released these new rear W2 uprights for the 966. A direct replacement for the standard part, they offer more steering in corner entry and faster/easier hairpin turn in. Available in OS2 version only, these super strong wide offset uprights offer 3 different upper roll centre mounting positions.

Source: Serpent [serpent.com]

December 1, 2009

Xray ECS drive shaft polished chrome pins

New from Xray, for use with the XT8, are these polished chrome pins for the ECS drive shaft. Sold in a set of two, these 2.5 x 15.8mm pins have been specially hand-ground to create a flat spot for tightening the set screw for maximum precision when putting together the drive shaft assembly.

Click here to see the pins mounted

November 25, 2009

HPI Blitz options & new servos

HPI have released a whole load of new products, with a focus being on their new short course truck, the Blitz. New for the Blitz are these aluminium threaded shocks for the front and rear of the truck. These tough, precision-machined anodized aluminum shocks deliver low friction for smooth dampening and better handling. Features include tough aluminium construction, titanium nitride coated shafts for smooth operation, track-tuned springs, 40wt silicone shock oil and threaded bodies with preload collars for fast and easy ride height adjustment. To add custom looks to your truck their are these new shock part sets that come in orange, brown or clear anodizing. Also for the shock absorbers, HPI have released new racing spring sets, giving a wide variety of tuning choices to dial in the handling of their trucks to track conditions for faster lap times. This set features 4 pairs of gray front springs that are color coded for easy identification. Lastly for the Blitz, new precision molded 48 pitch nylon spur gears are available in 77T, 83T & 88T and come with the slipper pad pre-applied, making them a direct bolt-on replacement part. Finally from HPI there are two new servos, the high torque SF-20 and SH-33PS, the former being a high performance upgrade to the SF-1 servo and a direct replacement for the SF-2 servo, while the latter is a high performance mini servo intended for cars like the HPI Cup Racer and other 1/12 scale cars.

Click here to see the other parts

November 25, 2009

Xray T3 1-piece aluminium suspension holder

Xray have released this optional 1-piece aluminium suspension holder for the T3, that is a direct replacement for the standard rear holders of the front suspension. This new part will reinforce the chassis and prevent chassis damage in serious crashes. The aluminum holder will make the front suspension a bit stiffer and will also make the car slightly less steering responsive.

Click here to see the part mounted