Red RC » Accessories

December 20, 2008

Factory Team Muffler & RC8T options

New from Factory team are these 1/8th scale muffler and header. Perfect for your RC8, SC8 and RC8T this 3-chamber muffler provides the best combination of bottom end punch and top end performance. Hard anodised they are EFRA Homologated (#2035). Also new from FT, for the RC8T are a pair of narrow aluminium wheel hexes. Recommended for use in both the front and rear of your RC8T and RC8T RS, they reduce your overall width by 9.0mm, yielding quicker steering response and more speed through the corners. Finally for the RC8T are front and rear chassis braces, made from aluminium, which both help stiffen the chassis in bending and torsion.

Click more to see the other products… content

December 19, 2008

Trinity Losi 8ight 2.0 uprights

Trinity have produced these new and improved rear uprights for the Losi 8ight 2.0. Featuring the same outstanding characteristics of the original Trinity developed Losi 8 1.0 uprights, but have been updated for the new Losi while also give you the option to adjust your roll center by raising or lowering the ball stud.

Source: Trinity [teamtrinity.com]

December 19, 2008

Venom LiPo Safety Charging sacks

Venom have released this LiPo Safety Charging Sack, which is designed to minimize potential hazards when charging a LiPo battery pack. Made of flame resistant material, the sack will help protect you and surrounding areas from possible fire damage. Use the safety sack while charging, storing or transporting your LiPO battery packs.

Source: Venom [venom-group.com]

December 17, 2008

Alienpower Electric Motor heatsinks

New from Alienpower is this line of electric motor heatsinks. Available in 3 different anodised colours, red, black & blue, they are made from lightweight aluminium and simply attach to the motor. The side of the heatsink also features a threaded hole to easily mount a fan for additional cooling.

Source: Alien Power [alienpower.net]

December 16, 2008

Reckward Tuning Inferno MP9 options

Reckward Tuning, who have been hard at work producing their tuning parts, have released some new items for the Kyosho Inferno MP9. First up is the lower rear wishbone mounting bracket that has been machined from aluminium and offers great strength for little weight and is supplied with original Kyosho plastic inserts to allow you to adjust the pivot pin setting. Similarly RT have also created the front upper support bracket from aluminium, which is also lightweight and adds strength to this critical impact area. Finally for the rear differential casing there is a new alloy reinforcement bracket that increases durability of all the parts in this area by reducing play in the casing.

Click more to see the other products… content

December 16, 2008

Edit Cyclone D4 Alloy Front Brace

Aftermarket parts maker Edit have released an alloy front brace for the Hot Bodies Cyclone D4 4wd buggy. Made from hard-anodized 7075 aluminium, the brace offers security in the event of heavy impacts by strengthening the front of the car where the wishbones are mounted.

Source: Edit [rc-edit.com]

December 15, 2008

Xray T2 52mm ECS Drive Shafts

The same concept as the previously available 50mm versions, Xray have released the new 52mm ECS drive shaft, designed with high-level racing in mind. These drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering. The drive shaft equalizes the speed between the drive shaft and the wheel, with a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding.

Source: Xray [teamxray.com]

December 13, 2008

Kyosho Inferno GT Alu uprights

Kyosho Inferno GT Alu hubs & blocks

Kyosho has released some new gear for your Inferno GT and Inferno GT2. Now you have the option of replacing the stock nylon rear hubs carrier with Kyosho’s new aluminium uprights. This will greatly increase the life in the rear bearing due to the nylon ring that encases the bearings, which helps decreases wear. Both front and rear hub uprights are made from high grade aluminium and finished in a cool blue finish. The aluminum steering blocks originate from the World Champion Inferno 777 line and are hard coated for extreme durability and long life.

Click more to see the other parts… content