Red RC » Accessories

April 14, 2008

Team Trion Long reach end bars

Team Trion have released long reach battery end bars for use with 5 cell pack configurations. Similar to the versions released recently by Much More, these move the point where the wire attaches to the pack out from under the car’s upper deck so it is easier to access. The long bars are sold in a pack of 10 or they can be bought as part of a full set for making a 5 cell pack that includes 4 battery bars also.

Click here to see the long reach end bar in place… content

April 11, 2008

Mugen MTX4-R Spur gears

Mugen have released a number of new spur gears for their 1/10th scale 200mm chassis, the MTX4-R. Made from a more durable composite plastic, these gears offer the cars owner a wider range of options to fine tune their cars gear ratio. The new 1st gears are available in 56T, 58T and 60T, while the 2nd gear spurs come in 52T, 53T and 54T.

Source: Mugen [mugenseiki.com]

April 11, 2008

Edit Cyclone 12 Ride Height Spacers

Edit RC have released a set of ride height spacers to precisely tune the front ride height of your Hot Bodies Cyclone 12. Made from lightweight alloy, they are supplied in a set of 4 x 0.5mm and 4 x 1.0mm thick plates meaning you will be able to get exactly the correct ride height for ultimate performance and precise control on the track.

Source: Edit RC [rc-edit.com]

April 9, 2008

Vita Tuning Hobao & Losi parts

Vita Tuning have released information about some new parts that they have made for Reckward Tuning for the Hobao Hyper 8.5 and the Losi 8ight. For both cars there are new 2-piece quick change engine mounting blocks that have been machined from aluminium and allow the user to remove and replace the motor without needing to re align the gears. Both engine mount sets are supplied with the required fasteners. For the Speed 2.5 clutch, Vita have also produced a new set of 3 aluminium clutch shoes.

Click more to see the other products… content

April 8, 2008

HB Pro Spec Ball Diff Complete set

Hot Bodies have released this all-new Pro Spec Ball Diff set for your Hot Bodies Cyclone and which has already been used by the company’s factory team to achieve impressive race wins. The 39-tooth pulley is a direct replacement for the existing ball diff pulley, and features wider spacing for the supplied ceramic diff balls. The cup joints are made from machined POM lightweight space-age plastic for great acceleration, while the included thicker and stronger titanium nitride diff screw and nut will outlast the standard diff screw. As this is a complete set, everything is included like the diff ball bearings, D-cut rings, spacers and diff & thrust bearing grease.

Source: Hot Bodies [hbeurope.com]

April 7, 2008

Reckward Tuning Mugen & clutch parts

Reckward Tuning in Germany has announced that they will begin to sell optional parts for the Mugen range of on road and off road cars, with more brands supported in the future. The first releases include front and rear chassis braces, which are suitable for the Mugen MBX-5, MBX-5R and MBX5-T that have been made from high grade aluminium for creating a super stiff chassis. For the Mugen MRX-4R and MTX-4, there is an aluminium radio box that is easily mounted to your car’s radio that helps protect your radio equipment in the event of a crash. Also new to their range of products are hardened 13T & 14T Speed 2.5 clutch bells, suitable for off road clutches with 26mm diameter.

Click more to see the other products… content

April 6, 2008

TKO Radial/Thrust Clutch bearings

TKO Competition development have introduced a new radial / thrust design bearing (5x13x4) for use in the clutch of Losi 1/8th scale off roaders. The Patent Pending bearing has 2 seals, one blue and one black, with the blue seal facing the front of the car. These bearings have a higher RPM rating than standard 5x13s and are capable of withstanding high radial and axial loads for improved performance and life. Their 5×10 bearing has also been updated with these 2 different coloured seals.

Source: TKO [tkocompetitiondev.com]

April 3, 2008

Corally VRS cells & Accessories

Corally VHS cells & Accessories

Corally have announced the release of lots of new products, some of which we saw that the Toy Fair back in February. Starting with cells, Corally have released their VRS matched IB4600 and EP4600, both available as race or team matched packs in either 4, 5 or 6-cell versions. New for their range of touring cars are special short shock bodies, making it possible to run your car with lower ride height settings while keeping more suspension up travel. For 1/12th scale racers are some new 36mm rear US Factory wheels, that are available next to the 38 mm US Factory wheels. With these wheels it is possible to use smaller diameter tires while keeping the same amount of rubber on traction required by some track conditions. For the company’s F1 chassis, they have released a set of five 3.0 mm aluminium spacers for adjusting the steering lever of this car and finally the long awaited Team Corally Black Hooded Sweaters with kangaroo pockets are available.

Click here to see the other new products… content