Red RC » Accessories

October 29, 2007

X-Factory X-5 Dual Pulley Upgrade Kit

X-Factory X5 Dual Pulley Upgrade Kit

Inspired by team drivers, this great new kit installs a second, larger idler pulley on your X-Factory X-5 Squared to reduce belt skip while maintaining complete driveline freedom. Your Squared idler bar is pre-drilled and tapped with holes for the Upgrade system, so installation is easy. The larger pulley mounts closer to the drive gear, increasing belt wrap and that reduces skip both on acceleration and braking. The normal idler is moved further back and slightly down on the idler bar, and the bar installs in the X-5 Squared just as it always did. This pulley arrangement allows the belt angles to be less than with just one, so driveline freedom is maintained.

Source: X-Factory [xfactoryrc.com]

October 29, 2007

Kawada M300 wheel axle spacers

Kawada have released some spacers for the rear axle of their M300, and other 1/12th scales with 1/4″ (6.35mm) axles. Made from aluminium they are sold in a set of 12 with 4 of each size, 0.5mm, 1.0mm and 2.0mm widths, and help adjust the rear track width of the car as shown in the picture above.

Source: Kawada [kawadamodel.co.jp]

October 28, 2007

Roche Motor connectors & Battery bars

Hong Kong based Roche contacted us to let us know about their newest products for electric racers. First up are these golden motor connectors, suitable for brushless motors, that are gold plated for reduced resitance, offer more wiring options and allow you to easily remove the wires from your motor once in place. Also from Roche are super high silver L type battery bars which are 100% coated in special high quality silver and that offer lower resistance and more output power, sold in packs of 10.

Click here to see the battery bars… content

October 26, 2007

Serpent S400 Foam Conversion set

Serpent have announced the release of this carbon conversion set for their Serpent S400 electric touring car. Enabling a great performance advantage on carpet, combined with the use of foam tyres, the set features a machined 3.4mm thick carbon fibre 6-cell chassis plate, which is extremely stiff and perfect for these high grip conditions. A great feature of this chassis plate is that along with the recessed mounting points, to lower the overall centre-of-gravity, the cell slots have be pre machined so no extra preparation in this area is needed. Also included in the set is stiff, front and rear, upper plates that also sport extensions that enable you to further stiffen the chassis by mounting the 4 supplied aluminium posts to both the upper and lower plates.

Click here to see the individual parts… content

October 25, 2007

Xray XB8 Active Differential

Xray have released their Active Differential, which is a high-performance, adjustable front gear differential for XB8 buggies that vastly improved the buggy’s speed and handling characteristics. The special design of the internal components, using different angled segments, allows the diff gears to engage on-power to increase the forward traction and stability to the buggy, making it faster and easier to drive. While the Xray Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to any level of driver that wants to a more predictable and easy-to-drive car in any racing conditions.

Source: Xray [teamxray.com]

October 23, 2007

Serpent Centax-3 one piece pinions

New for the Serpent Centax 3 clutch are these one-piece 2-speed pinions. Made from steel, instead of the standard coated aluminium, they are much stronger than the previous versions as well as more durable, having a better resistance to wear from grit and sand picked up on the track. The 2 pinions are now combined in one piece of metal, instead of 2 separate gears that are screwed together, and this now simply screws to the clutch bell for a very secure and true clutch assembly.

Source: Serpent [serpent.com]

October 21, 2007

Machines Racing Products CEN options

Machines Racing Products have released a number of new hop-up option parts for the CEN Racing Matrix and TR, available exclusively at Machine’s R/C Hobbies. Designed by CEN factory team driver, Gene ‘the machine’ Hickerson the new products inlcude hardened tool steel cross pins, for the Matrix, TR Arena, and GST 7.7 differentials and CNC 7075 blue anodized front upper turnbuckles for the Matrix TR Arena and Matrix Buggy. Also new for the Matrix & TR Arena is a CNC 7075 blue anodized ackerman steering plate and a CNC 7075 blue anodized front suspension holder plate.

Click here to see other products… content

October 18, 2007

Ultimate Racing Safety body clips

More new stuff from Ultimate Racing, who have announced the release of their new set of safety body shell clips. Made of steel with a special design that prevents the clips falling of from the body post they are easy to remove and replace and are sold in a pack of 5.

Source: Ultimate Racing [ultimateracing.es]