Red RC » Accessories

April 14, 2020

Yokomo BD10 brass clamping wheel hubs

Yokomo have announced the release of their new brass clamping wheel hubs for the BD10 touring car. Weighing in at 5.45g per set and thus being about 3.6g heavier than the standard aluminium adapters, the brass parts will increase unsprung weight which can be beneficial in certain track conditions, such as outdoor tracks. The hubs allow to increase traction on the respective end of the car, allowing to mix and match them with their alloy counterparts with a heavier front making for improved corning while in the rear, the brass hubs can improve stability. The hubs use a 4.0mm offset which is the same as the standard aluminium hubs and they come in sets of two.

Source: Yokomo [teamyokomo.com]

April 13, 2020

Samix SCX10 III alloy outer driveshaft set

Samix have introduced new aluminium outer driveshaft sets for the Axial SCX10 III trail truck. The driveshaft bodies are machined from high-quality aluminium and they come anodised for surface protection and cool looks. The parts were designed as a direct fit for the centre driveshafts and improve rigidity and overall durability. They come in sets of four and in green, black or grey anodising.

View another image here

April 13, 2020

BF Materials MP10/MP9 connector & transponder mount

Coming from BF Materials is a clever connector and transponder mount for the Kyosho Inferno MP10 and MP9 series of vehicles. Designed for the use with universal-style receiver connectors and MyLaps RC4 transponders, the integrated mount allows for secure car operation as the connector holder prevents the receiver battery plug from becoming unplugged during use while the transponder is securely fastened in the same area. The locked design keeps all parts in place, however the plug and transponder can be removed easily when needed. Made of tough nylon plastics the mount attaches to the original transponder mounting plate using four M3 screws, ensuring a nice and tidy setup.

View another image here

April 13, 2020

T-Works MP10 & MT10T aluminium chassis braces

Made for Kyosho’s Inferno MP10 and MP10T vehicles are new aluminium chassis braces from T-Works. The front brace is usable for the MP10 buggy and MP10T truggy while the rear chassis brace is made exclusively for the MP10T. The parts are machined from high-quality 7075-T6 aluminium and they come black anodised for wear and looks. Machined silver edge details further enhance the visual appearance and included with the braces, that are available separately, comes suitable mounting hardware.

View more images here

April 13, 2020

Samix SCX10 III brass spring retainer cups

Coming from Samix and made for the Axial SCX10 III trail truck is a 4-piece set of brass spring retainer cups. Machined from high-quality material and coming with a black surface finish for wear and looks as well as machined brass edge details, the spring retainers add about 35g of weight to one of the lowest areas of the chassis, thus improving climbing performance of the vehicle. In addition to adding weight the sturdy metal construction also ensures proper seated springs which will add reliability in rough terrain. The spring retainers suit the all-new SCX10 III but also older spec SCX10 kits.

View another image here

April 10, 2020

Rebellion-RC T4F mid-motor conversion kit

RC-Carbonstore have announced the release of their Rebellion-RC mid-motor conversion kit for the popular Xray T4F FWD touring car. Designed for the use with the now redundant T4F 2019, the conversion utilises the design and all of the features of Rebellion-RC’s successful T4 FWD mid-motor conversion with a new upper deck and front shock tower being the most important updates. The front shock tower uses the T4’19 geometry, making for a lower centre of gravity compared to the T4F with the front body mounts being attachable in two different ways – the same as on the T4F or in a regular “4WD-ish” fashion with the body posts mounted to the front bumper. The conversion allows to use all of the existing option parts such as shock springs, anti-roll bars, lower arms etc. and the design enables the owner to convert the car back into a front-motor FWD in case track conditions call for it. The kit will become available including a carbon fibre or CrossFlex aluminium chassis and it includes all needed parts minus the required Xray off-set spur gear.

View a list of the features and more images here

April 10, 2020

Tamiya CC-02 aluminium arm pivot

Coming from Tamiya and made for the CC-02 trail truck is an aluminium arm pivot set. Designed to replace the standard C5 and C6 parts and being machined from high-quality aluminium, the mounts offer improved rigidity in the link arm area, ensuring greater durability and smoother suspension movement. In addition the mounting hardware is a lot less prone to become undone by the suspension movement. The set includes the A and B mounts as well as mounting hardware.

View the installed mounts here

April 10, 2020

Samix SCX10 III brass driveshaft caps

Made for the Axial SCX10 III trail truck is Samix’s new set of brass driveshaft caps. The 4-piece set adds about 21g of weight to some of the lowest areas of the chassis, improving climbing performance while adding a cool new look. In addition the parts, that are usable on the transmission output and axle input shafts, increase stability and durability of the drivetrain as they are a direct fit on the plastic shafts.

View more images here